Candidate: Aixi Pan
Title: Fabrication of high aspect ratio (HAR) atomic force microscope (AFM) tips and nano-pillar arrays using pseudo-Bosch and wet etching
Date: July 29, 2020
Time: 10:00 AM
Place: Remote
Supervisor(s): Cui, Bo
Abstract:
This thesis is mainly focused on the research in the field of nanofabrication and application related to atomic force microscope
(AFM) system. AFM tip is the most important part of AFM imaging to obtain the surface information by touching the substrate and “feeling” the force interaction. However, the scanned image using regular commercial tips is not accurate when scanning across areas with deep/tall and narrow structures. To overcome the drawbacks, high aspect ratio (HAR) tip was introduced to obtain high-quality and accurate images with high resolution and clear restoration. Also, some common fabrication techniques of HAR AFM tip and some important steps such as electron beam lithography and etching process are discussed in this this.
The long-term goal of dry etching for our purpose is to have high etching rate, high etching selectivity to mask material, and controllable vertical profile with smooth sidewall, so non-switching (i.e. introduce SF6 and C4F8 gas into the chamber
simultaneously) pseudo-Bosch recipe was developed and optimized, to replace the standard Bosch process that gives wavy and rough sidewall. Moreover, when switching between SF6/C4F8 etching and O2 cleaning, that is, adding periodic oxygen (O2) plasma cleaning step to the pseudo-Bosch etching process, the etching rate of silicon structures can be significantly improved without any adverse effect. The obtained profile of pillars is slightly positively tapered which is optimal for HAR tips.
The fabrication of HAR tips is similar to that of HAR nano-pillars, and the same nano-pillars can be extended to the biomedical application of nanoneedles. As such, here we present a new method to fabricate ultra-high aspect ratio silicon nano-pillar arrays using reactive ion etching and subsequent sharpening/thinning down by wet etching, which features high viability and high throughput. The results show that the aspect ratio of the fabricated nano-pillars can be up to 125.