Our Laser Cutters

Laser Cutter

Epilog Fusion M2 40 Laser Cutter

  • This laser cutter works by using a state of the art 75 watt CO2 laser and a compressed air flame/scorch prevention system to create sharp, clean edges, with no unwanted markings
  • The laser has a 40" x 28" (1010mm x 710) cut bed allowing for cuts on larger pieces of material up to a thickness of 3/8" (9.5mm)
  • The laser is capable of both cutting and multi-level engraving the same material allowing you to create impressive and unique pieces 
  • The laser capable of cutting at a resolution of 600 dpi (dots per inch), with a kerf of 0.1-0.175mm (material dependant)
Trotec Speedy 300 laser cutter

Trotec Speedy 300 Laser Cutter

  • This laser cutter works by using a 80-watt CO2 laser and a compressed air flame/scorch prevention system to create sharp, clean edges, with no unwanted markings.
  • The laser has a 28.5" x 17" (726mm x 432mm) cut bed allowing for cuts on smaller pieces of material up to a thickness of 1/4" (6.35mm).
  • The laser is capable of both cutting and engraving the same material, allowing you to create impressive and unique pieces. 
  • The laser is capable of cutting at a resolution of 1000 dpi (dots per inch), with a kerf of 0.1mm (material dependant).