Phoenix Acquisition & Expansion Module (AM) 24 Channels |
||
|---|---|---|
|
High-Speed Analog Inputs |
# Channels | 24 |
| Resolution | 16-bit | |
| Acquisition Rate |
20,000 RPM at 0.1° 2 MHz |
|
| Low-pass filters | None, 12.5 kHz, 25kHz, 50 kHz | |
| Input Ranges | ± 1 V, ± 2 V, ± 5 V, ± 10 V, ± 50 V | |
| Digital Inputs | # Channels (Up to four used by an encoder) | 16 per module |
| Input Ranges | ± 5 V | |
| Data & Analysis | Analysis Method | Data is streamed to host PC for analysis |
| Analysis rate without missing an engine cycle | Lossless real-time analysis not guaranteed over 1,200 RPM | |
| System Memory | 256 MB | |
Phoenix Real-Time (RT) Module |
||
|---|---|---|
| Analog Outputs | #Channels | 16 |
| Resolution | 16-bit | |
| Update Rate | 16-bit | |
| Output Range | ± 10 V | |
| Digital Outputs | # Channels | 16 |
| Update Rate | 100 Hz (based on engine RPM) | |
| Data & Analysis | Analysis Method | Real-time cycle-by-cycle data is streamed to DSP core on-board Phoenix RT for analysis |
| Analysis rate without missing an engine cycle | 12,000 RPM at 0.1° | |
| System Memory | 2 GB | |
| Non-volatile logging | USB, eSATA, SATA | |
| Test Bench Interfaces | Winsocket, ASAP3, streaming UDP, XCP and streaming CANbus | |