Selected recent conference papers

  • Gryguc A, Jahed H, Williams B,  McKinley J, “MAGFORGE - MECHANICAL BEHAVIOUR OF FORGED AZ31B EXTRUDED MAGNESIUM IN MONOTONIC COMPRESSION,” LMT2015, Port Elizabeth, South Africa,  July 27-29, 2015;
  • Roostaei A, Jahed H, “Cyclic Plasticity Modelling of Wrought Magnesium Alloys,” Proceedings of the 25th CANCAM, London, Ontario, Canada, May 31 – June 4, 2015;
  • Marzbanrad B, Toyserkani E, Jahed H, “Application of Fiber Bragg Grating Sensors in Strain Measurements of AZ31B Extrusion in Rotating Bending Cyclic Tests,” Proceedings of the 25th CANCAM, London, Ontario, Canada, May 31 – June 4, 2015;
  • Behravesh SB, Jahed H, Lambert S, "Cyclic Plasticity Constitutive Modelling of AZ31B," International Symposium of Plasticity, Freeport, Bahamas, Jan 2014;
  • Behravesh SB, Jahed H, Lambert S, "Fatigue Characterization and Modeling of AZ31B Spot-welded Joints, ASME 2013 International Mechanical Engineering Congress & Exposition," IMECE2013, San Diego, California, November, 2013;
  • Noban M, Jahed H, "A Cyclic Plasticity Model for Multiaxial Behavior of Magnesium," ICMFF10, Kyoto, Japan, 3-7 June 2013;
  • Behravesh SB, Jahed H, Lambert S, "Fatigue Characterization and Modeling of AZ31B Spot-welded Joints," ICMFF10, Kyoto, Japan, 3-7 June 2013;
  • Albinmousa J, Jahed H, Lambert s, "Estimation of Fatigue Crack Orientation using Critical Plane Parameters: An Experimental Investigation," ICMFF10, Kyoto, Japan, 3-7 June 2013;
  • Mahmoudi H, Jahed H, Villafuerte J, “The Effect of Cold Spray Coating on Fatigue Life of AZ31B,” MG2012, July 8-12. 2012, Vancouver;

  • Noban M, Jahed H, “Modeling the Cyclic Plasticity Behavior of Wrought Mg Alloys,” MG2012, July 8-12. 2012, Vancouver;

  • Albinmousa, J, Jahed, H, and Lambert, S. (2011), “Multiaxial Fatigue Life Prediction of AZ31B Extrusion”, The 23rd Canadian Congress of Applied Mechanics, June 5-9, Vancouver, BC, Canada

  • Noban, M, Albinmousa, J, Jahed, J, Lambert, S. (2011), “Continuum-Based Cyclic Plasticity Model for AZ31B Magnesium Alloy”, in 11th International Conference on the Mechanical Behaviour of Materials, June 5-9, Milano, Italy; Procedia Engineering 10 (2011) 1366–1371

  • Albinmousa J, Jahed H, Lambert S, " An energy-based fatigue model for wrought magnesium alloy under multiaxial load ", 9th International conference on multiaxial fatigue and fracture, ICMFF9, Parma, Italy, June 2010.

  • Albinmousa J, Jahed H, Lambert S, Begum S, Chen D, Duan Q, Luo T, Yang Y, Zhang Z, Horstemeyer MF, Jordon J B, Pascu A, Luo AA, Osborne R, Su X, Zhang L, " Monotonic and Fatigue Behavior of Magnesium Extrusion Alloy AM30: An International Benchmark Test in the Magnesium Front End Research and Development Project ", SAE2010 World Congress, Detroit, US, April 2010.

  • Behravesh SB, Liu L, Jahed H, Lambert S, Glinka G, Zhou Y, " Fatigue properties of resistance spot welded AZ31magnesium alloy ", SAE2010 World Congress, Detroit, US, April 2010.

  • Karimi M, Jahed H and Khajepour A , " CZM Application to Failure Analysis of Brazed Joints ", 12th International Conference on Fracture , Ottawa, Canada, June 2009.

  • Tajik A, Jahed H , " Application of Moiré Interferometry to Whole Field Strain Measurement in Thin Film Specimens ", Materials Research Society , Fall 2008, Boston, USA.

  • Tajik A, Jahed H , " Fabrication of Diffraction Gratings on Aluminum Thin Film Specimens using Focused Ion Beam (FIB) ", 2nd International Congress on Nanoscience and Nanotechnology , Fall 2008,Tabriz, Iran.

  • Amin Eshraghi, Hamid Jahed and Steve Lambert , " Generalized Hypo-Elasticity for Arbitrary Stress Rates ", The international conference of plasticity 2008 , January 2008, Kona, Hawaii.

  • Paryab N, Jahed H and Khajepour A , " Failure mechanisms of MEMS thermal actuators ", ASME International Mechanical Engineering Congress and Exposition , November 5-10, 2006, Chicago, Illinois.

  • Paryab N, Jahed H and Khajepour A , " Failure mechanisms of MEMS thermal actuators", The 2006 Ontario Nano Symposium , The University of Waterloo, May 19, 2006.

  • Jahed H, Farshi B, Nasr A and Eshraghi A, 2006 , " Wheel Profile Optimization for Wear ", Proceedings of the 14th International Mechanical Engineering Conference , Isfahan University of Technology, Isfahan, Iran, May 2006.

  • Nasr A, Jahed H, Farshi B, and Eshraghi A, 2006 , " Railway Vehicle Wheels Un-Balanced Wear: Causes and Recommendations ", Proceedings of the14th International Mechanical Engineering Conference , Isfahan University of Technology, Isfahan, Iran, May 2006.

  • Nasr A, Jahed H, Farshi B and Eshraghi A, 2005 , " Un-Symmetrical Wear (NSW) and its relation to track defects ", VTM 2005, the 3rd international conference , Paris, France, 21-22, November 2005.

  • Jahed H, Kazemkhani A, Asef A, Zamanisafa A, 2001 , " Design of a Human Hybrid Vehicle ", Proceedings of First Hybrid Vehicles Conference , Iran University of Science & Technology, Tehran, Iran, pp.133-143, June 2005.

  • Jahed H and Varvani A., 2004 , " Plasticity in Low Cycle Fatigue Analysis ", Proceedings of the 7th International Conference on Biaxial/Multiaxial Fatigue & Fracture , Berlin, June 2004.

  • Jahed H, Tajik A, Shamae K and Rad S, 2004 , " Rapid Prototyping of Starch- Based Bone Tissue Engineering Scaffolds ", International Conference on Biomedical Engineering in Kuala Lumpur, Malaysia, IFBME Proc. 7: 369-372 , September 2004.

  • Jahed H, Rezae S, 2004 , " Double Swage Autofrettage Analysis using Actual Material Unloading Behavior ", Proceedings of the 8th International Conference of ISME , Tarbeyat Modares University, Tehran. p 323, May 2004.

  • Jahed H, Ghafouri R, 2004 , " Residual stress induced by deep drawing on fatigue life of rim ", Proceeding of the 2nd conference on material engineering , Sharif university, p 48, April 2004.

  • Jahed H, Nasr A and Eshraghi A, 2004 , " Parameters influencing wear in Iranian state railways ", International conference of rail ways , Sharif university, p 57, March 2004.