Articles in refereed journals

2023

  1. Azqadan E*, Jahed H, Arami A, Predictive Microstructure Image Generation Using Denoising Diffusion Probabilistic Model, Acta Materialia, Volume 261, 119406, 2023, https://doi.org/10.1016/j.actamat.2023.119406
  2. Zardoshtian A*, Esmaeilizadeh R*, Ansari M, Keshavarz MK, Jahed H, Toyserkani E, On the processability and microstructural evolution of CuCrZr in multilayer laser directed energy deposition additive manufacturing, Journal of Manufacturing and Materials Processing, 7 (4), 151, 2023
  3. Azqadan E*, Uramowski J, Wells M, Arami A, Jahed H, Hardness Variation in Cast-Forging Process of AZ80 Magnesium Alloys and its data-driven Prediction, Materials Today Communications, 2023, 106833.
  4. Kodippili T, Azqadan E, Jahed H, Lambert S, Arami A, Multi-objective Optimization of a Cast-preform Shape for a Magnesium Alloy Forging Application, Int. J. Advanced Manufacturing Technology, 2023, https://doi.org/10.21203/rs.3.rs-3182706/v1
  5. Sripada JVSN, Shaha DC, Saha GC, Jahed H, Bonding mechanism and microstructural evolution in mechanically alloyed nanodiamond-reinforced Al6061 composite particle deposits in cold spray, Surface and Coatings Technology, 466, 12961, 2023
  6. Zardoshtian A*, Ansari M, Esmaeilzadeh R*, Keshavarzkermani A, Jahed H, Toyserkani E, Laser Directed Energy Deposition of CuCrZr alloy: From Statistical Process Parameter Optimization to Microstructural Analysis, International Journal of Advanced Manufacturing Technology, 2023, https://doi.org/10.1007/s00170-023-11403-3
  7. Shaha SK, Jahed H, Kacher J, Additively manufactured Ti55511 alloy: Microstructure and residual stress effect on mechanical properties, 2023, Journal of Manufacturing Processes 94, 348
  8. Saha D**, Boegel S, Lourenco C, Tanvir S, Anderson B, Aucoin M, Jahed H, Antiviral and antibacterial cold spray coating application on rubber substrate, disruption in disease transmission chain, 2023, Journal of Thermal Spray Technology32, 818
  9. Faghih S*, Behravesh SB**, Shaha S**, Jahed H, Effect of split sleeve cold expansion on fatigue performance of a rolled AZ31B magnesium alloy, Theoretical and Applied Fracture Mechanics, 2023, 123, 103715
  10. Li X, Esmaeilizadeh R*, Jahed H, Toysarkani E, Pham MS, Holdsworth SR, Hosseini E, Effects of temperature and strain rate on tensile properties and dynamic strain aging behaviour of LPBF Hastelloy X, Additive Manufacturing Letter, 2023, 4, 100105
  11. Ibrahim AH, Watson B, Jahed H, Rezaee S, Royer C, Cronin DS, Prediction of bonded asymmetric metallic cross-tension and single lap shear joints using finite element model with material-level adhesive properties and cohesive zone method, International Journal of Adhesion and Adhesives, 2023, 120, 103298

2022

  1. Saha D**, Sripada JVSN, Saha G, Jahed H, Microstructure and interfacial bonding evolution of cold spray deposited graphene-reinforced composite feedstock on AZ80 magnesium substrate, Journal of Thermal Spray Technology, December 2022, https://doi.org/10.1007/s11666-022-01524-8
  2. Zhang J*, Saha D**, Behravesh B**, Jahed H, Adhesion properties of plasma transferred wire arc low-carbon steel coating sprayed on diecast aluminum alloys: Experiment and simulation, Surface and Coatings Technology, 2022, 447, 128867, https://doi.org/10.1016/j.surfcoat.2022.128867
  3. Marzbanrad B**, Toyserkani E, Jahed H, Fatigue crack initiation in cold spray coated AZ31B-H24 with AA7075 powder, International Journal of Fatigue, 2022, 163, 107084
  4. Shaha SK, Sarker D, Jahed H, Solid-state additive deposition of AA7075 on AZ31B substrate: heat treatment to improve the corrosion fatigue resistance, Metals, 2022, 12, 1578
  5. Azqadan E*, Uramowski J, Roostaei A**, Behravesh SB**, Javaid, A, Williams B, Wells M, Jahed H, The effect of cooling rate and degassing on microstructure and mechanical properties of cast AZ80 magnesium alloy, Materials Science and Engineering: A, 2022, 844, 143176
  6. Karparvarfard SMH*, Roostaei A**, Behravesh SB**, Jahed H, Multiaxial fatigue behavior characteristics and modeling of low-temperature closed-die forged ZK60 extrusion under proportional and non-proportional loading, Fatigue & Fracture of Engineering Materials & Structures (FFEMS), 2022, 45, 7, 1866,  https://doi.org/10.1111/ffe.13706
  7. Yazdanmehr A*, Roostaei A**, Jahed H, Modelling residual stresses in shot-peened magnesium alloys: A hybrid method, Metals and Materials International, 2022, https://doi.org/10.1007/s12540-021-01141-0
  8. Xue Y*, Pang X, Karparvarfard SMH*, Jahed H, Luo S, Y Shen, Corrosion protection of ZK60 wrought magnesium alloys by micro-arc oxidation, Metals, 2022, 12 (3), 449
  9. Esmaeilizadeh R*, Keshavarzkermani A, Faghih S**, Behravesh B**, Ali U, Bonakdar A, Jahed H, Toyserkani E, Fatigue characterization and modelling of additively manufactured hastelloy-X super alloy, Journal of Materials Engineering and Performance, 2022, https://doi.org/10.1007/s11665-022-06595-w  
  10. Faria JJR, Fonseca LGA, de Faria AR, Cantisano A, Cunha TN, Jahed H, Montesano J, Determination of the fatigue behavior of mechanical components through infrared thermography, Engineering Failure Analysis, 2022, 134, 106018

2021

  1. Norouzi M*, Saha DC**, Jahed H, Masoumi N, A phase variation-based smart structure for crack detection on metals using cold spray additive manufacturing, IEEE Transactions on Instrumentation & Measurement, 2021, doi: 10.1109/TIM.2021.3132994 
  2. Zhang J*, Saha DC**, Jahed H, Microstructure and mechanical properties of plasma transferred wire arc spray coating on aluminum cylinder bores, Surface and Coatings Technology, 2021, 426, 127757
  3. Marzbanrad B*, Toyserkani E, Jahed H, Characterization of single and multi-layer cold spray coating of Zn on AZ31B, Surface and Coatings Technology, 2021, 416, 127155
  4. Yazdanmehr A*, Roostaei A**, Jahed H, A novel test design for large strain uniaxial reverse loading of AZ31B sheet out of the rolling plane, ASME Journal of Engineering Materials and Technology, 2021, 143 (4), 044501
  5. Gryguc A*, Behravesh SB**, Jahed H, Wells M, Williams B, Gruber R, Duquett A, Sparrow T, Prsa J, Su X, A method for comparing the fatigue performance of forged AZ80 magnesium, Metals, 2021, 11, 1290
  6. Davoodi E, Montazerian H, Esmaeilizadeh R*, Rashidi A, Darabie AC, Kadkhodapour J, Jahed H, Hoorfar M, Milani AS, Khademhosseini A, Toyserkani E, Additively Manufactured Gradient Porous Ti-6Al-4V Implants Embedded with Cell-Laden Gelatin Methacryloyl Hydrogels Engineered for Bio-Permeability and Mechanical Stability, ACS Applied Materials & Interfaces, 2021, 13 (19), 22110
  7. Marzbanrad B*, Razmpoosh MH, Toyserkani E, Jahed H, Role of heat balance on the microstructure evolution of cold spray coated AZ31B with AA7075, Journal of Magnesium and Alloys, 2021, 9 (4), 1458
  8. Fonseca L*, de Faria A, Batalha M, Jahed H, Manufacturing process role over the residual stress evolution of crankshafts, Journal of Advanced Manufacturing Technology, 2021, 112 (9), 2425
  9. Esmaeilizadeh R*, Keshavarzkermani A, Ali U, Behravesh B, Bonakdar A, Jahed H, Toyserkani E , On the effect of laser powder-bed fusion process parameters on quasi-static and fatigue behaviour of hastelloy X: A microstructure/defect interaction study, Additive Manufacturing, 2021, 38, 101805
  10. Hou W, Shen Z, Huda N, Oheil M *, Shen Y, Jahed H, Gerlich A, Enhancing metallurgical and mechanical properties of friction stir butt welded joints of Al–Cu via cold sprayed Ni interlayer, Journal of Materials Science and Engineering: A, 2021, 809, 140992
  11. Norouzi M*, Masoumi N, Jahed H, A nondestructive phase variation based chipless sensing methodology for metal crack monitoring, IEEE Transactions on Instrumentation & Measurement, 2021, 70, 1
  12. Sripada JVSN, Saha DC**, Saha GC, Jahed H, Study the effect of milling parameters on HE-MA nanostructured Al6061-graphene cermet feedstock particles, Journal of Alloys and Compounds, 2021, 70, 1
  13. Gryguc A*, Behravesh SB**, Jahed H, Wells M, Williams B, Gruber R, Duquett A, Sparrow T, Lambrou M, X Su, Effect of thermomechanical processing defects on fatigue and fracture behaviour of forged magnesium, 2021, Frattura ed Integrità Strutturale, 15 (55), 213
  14. Marzbanrad B*, Toyserkani E, Jahed H, Customization of residual stress in cold spray printing, Journal of Materials Processing Technology, 2021, 289, 116928

2020

  1. Hou W, Oheil M *, Shen Z, Shen Y, Jahed H, Gerlich A, Enhanced strength and ductility in dissimilar friction stir butt welded Al/Cu joints by addition of a cold-spray Ni interlayer, Journal of Manufacturing Processes, 2020, 60, 573
  2. Yazdanmehr A*, Jahed H, On the residual stress measurement of magnesium alloys using two-dimensional X-ray Diffraction, Materials, 2020, 13 (22), 5190
  3. Enrique P, Keshavarzkermani A, Esmaeilizadeh R*, Peterkin S, Jahed H, Toyserkani E, Zhou N, Performance assessment of additive manufactured parts with electrospark deposition enhanced surface, Additive Manufacturing, 2020, 36, 101526
  4. Jabbari A*, Sedighi M, Jahed H, Sommitsch, Low cycle fatigue behavior of AZ31B extrusion at elevated temperatures, Int. J. Fatigue, 2020, 139, 105803
  5. Prakash P, Toscano D*, Shaha S**, Wells M, Jahed H, Williams B, Effect of temperature on the hot deformation behavior of AZ80 magnesium alloy, Materials Science & Engineering A, 2020, 794, 139923
  6. Xue Y*, Pang X, Jiang B, Jahed H, Wang D, Characterization of the corrosion performances of as-cast Mg–Al and Mg–Zn magnesium alloys with microarc oxidation coatings, Materials and Corrosion, 2020, 71, 992
  7. Gryguc A *, Shaha SK**, Behravesh SB**, Jahed H, Wells M, Williams B, Improvement of Fatigue Properties of AZ31B Extruded Magnesium Alloy through Forging,  Fracture and Structural Integrity, 2020, 14 (53), 152
  8. Toscano D*, Behravesh B**, Shaha S**, Jahed H, Williams B., Characterization of closed-die forged AZ31B under pure axial and pure shear loading, Int. J. Fatigue, 2020, 139, 105754
  9. Jabbari A*, Sabet A, Sedighi M, Jahed H, Low cycle fatigue behavior of magnesium matrix nanocomposite at ambient and elevated temperatures, Materials Science & Engineering A, 2020, 793, 139890
  10. Gryguc A*, Behravesh B**, Jahed H, Wells M, Williams B, Su X, Multiaxial fatigue and cracking orientation of forged AZ80magnesium alloy, Procedia Structural Integrity, 2020, 25, 486
  11. Shaha S**, Jahed H, An In-Situ Study of the Interface Microstructure of Solid-State Additive Deposition of AA7075 on AZ31B Substrate, Journal of Applied Surface Science, 2020, 508, 144974
  12. Roostaei A**, Ling Y*, Jahed H, Glinka G, Applications of Neuber’s and Glinka’s notch approximation rules to asymmetric materials under cyclic load, Theoretical & Applied Fracture Mechanics, 2020, 105, 102431
  13. Esmaeilizadeh R*, Keshavarzkermani A, Usman A, Mahmoodkhani Y, Behravesh B**, Jahed H, Ali Bonakdar, Toyserkani E, Customizing mechanical properties of additively manufactured Hastelloy X parts by adjusting laser scanning speed, Journal of Alloys and Compounds, 2020, 812, 152097
  14. Fonseca LA*, AR de Faria, Jahed H, Montesano J, Material model selection for crankshaft deep rolling process numerical simulation," SAE Technical Paper, 2020, 2020-01-1078
  15. Faghih S*, Shaha SK**, Behravesh SB**, Jahed H, Split sleeve cold expansion of AZ31B sheet: microstructure, texture and residual stress, Journal of Materials & Design, 2020, 186, 108213

2019

  1. Khodabakhshi F, Marzbanrad B*, Yazdanmehr A*, Jahed H, Gerlich AP, Tailoring the residual stress during two-step cold gas spraying and friction-stir surface integration of titanium coating, Journal of Surface & Coating Technology, 2019, 380, 125008-1198
  2. Khodabakhshi F, Marzbanrad B*, Shah LH, Jahed H, Gerlich AP, Surface modification of a cold gas dynamic spray deposited titanium coating layer on an aluminum alloy substrate by using friction-stir processing, Journal of Thermal Spray Technology, 2019, 28 (6), 1185-1198
  3. Marzbanrad B*, Toyserkani E, Jahed H, Multi-Layer Cold Spray Coating: Strain Distribution, Key Engineering Materials, 2019, 813, 411-416
  4. Gryguc A*, Behravesh SB**, Shaha SK**, Jahed H, Wells M, Williams B, Su X, Multiaxial cyclic behaviour of extruded and forged AZ80 Mg alloy, International Journal of Fatigue, 2019, 127, 324-337
  5. Pahlevanpour AH*, Behravesh SB**, Adibnazari S, Jahed H, Characterization and modeling of anisotropic fatigue behaviour of ZK60 extrusion under stress-control condition and notes on fatigue modeling, International Journal of Fatigue, 2019, 127, 101-109
  6. Wang J*, Pang X, Jahed H, Surface protection of Mg alloys in automotive applications: A review, AIMS Materials Science, 2019, 6(4): 567-600
  7. Liang R*, Roostaei A**, Glinka G, Jahed H,  Fatigue of ZEK100 sheet: characterisation and modeling, International Journal of Fatigue, 2019, 125, 179-186
  8. Shaha SK **, Jahed H, Characterization of nanolayer intermetallics formed in cold sprayed Al powder on Mg substrate, Materials, 2019, 12 (8), 1317
  9. Qian LFV*, Roostaei A**, Dighrasker U, Jahed H, Notch plasticity and fatigue modelling of AZ31B-H24 magnesium alloy sheet, SAE International, technical paper: 2019-01-0530, 1-11
  10. Roostaei A**, Pahlevanpour A*, Behravesh B**, Jahed H, On the definition of elastic energy in fatigue analysis, International Journal of Fatigue, 2019, 121, 237-242
  11.  Ahmed M, Zehtab Yazdi A, Dayani SB*, Jahed H, and Chen P, Fabrication of anode of aqueous energy storage system via supersonic cold spraying, ChemElectro Chem, 2019, 6 (5), 1333-1337
  12. Xue Y*, Pang X, Jiang B, Jahed H. Corrosion and corrosion fatigue performances of micro-arc oxidation coating on AZ31B cast magnesium alloy, Materials and Corrosion, 2019, 70 (2), 268-280
  13. Karparvarfard SMH*, Shaha SK**, Behravesh SB**, Jahed H, Williams BW, Fatigue characteristics and modeling of cast and cast-forged ZK60 magnesium alloy, International Journal of Fatigue, 2019, 118, 282-297

2018

  1. SK Shaha**, SB Dayani*, Y Xue*, X Pang, and H Jahed, Improving corrosion and corrosion-fatigue resistance of AZ31B Cast Mg alloy using combined cold spray and top coatings, Coatings, 2018, 8 (12), 443-465
  2.  Hajipour H*, Abdollah-Zadeh A, Assadi H, Taheri Nasaj E, Jahed H, Effect of feedstock powder on the cold spray titanium dioxide coating, Surface and Coatings Technology, 2018, 27, 8, 1542–1550
  3. Pahlevanpour AH*, Karparvarfard SMH*, Shaha SK**, Behravesh SB**, Adibnazari S, Jahed H, Anisotropy in the quasi-static and cyclic behavior of extruded ZK60 Mg Alloy; characterization and fatigue modeling, Materials and Design, 2018, 160, 936-948
  4. Xue Y*, Pang X, Jiang B, Jahed H, Influence of micro-arc oxidation coatings on corrosion performances of AZ80 cast alloy, Int. J. Electrochem. Sci., 13, 2018, 7265 – 7281
  5. F Khodabakhshi, B Marzbanrad*, H Jahed, AP Gerlich, Interfacial bonding mechanisms between aluminum and titanium during cold gas spraying followed by friction-stir modification, Applied Surface Sciences, 2018, 462, 31, 739-752
  6. Gryguc A*, Behravesh B**, Shaha S**, Jahed H, Wells M, Williams B, Su X, Low-Cycle Fatigue Characterization and Texture Induced Ratcheting Behaviour of Forged AZ80 Mg Alloys, International Journal of Fatigue, 2018, 116, 429-438
  7. Roostaei A*, Jahed H, Constitutive plastic modelling of wrought magnesium alloys under multiaxial cyclic loading conditions considering asymmetry/anisotropy, International Journal of Mechanical Sciences, 2018, 145, 318-329
  8.  Dayani SB*, Ghelichi R**, Shaha SK**, Wang JF, Jahed H, The impact of Al7075 cold spray coating on the fatigue life of AZ31B cast alloy, Surface & Coatings Technology, 2018, 337, 150-158
  9. Faghih S*, Behravesh B**, Jahed H, Variable Material Properties (VMP) approach: a review on twenty years of progress, Journal of Pressure Vessels Technology, Transaction of ASME, 2018, 140, 5, 050803-1, 050803-15, doi: 10.1115/1.4039068
  10. Marzban B*, Jahed H, Toyserkani E, On the evolution of substrate’s residual stress during the cold spray process: a parametric study, Materials and Design, 2018, 138, 90-102

2017

  1. Khodabakhshi F, Marzbanrad B*, Shah LH, Jahed H, Gerlich AP, Friction-stir processing of a cold sprayed AZ31B-AA7075 bi-metallic structure: Structural homogeneity, microstructural evolution and mechanical durability, Surface & Coatings Technology, 2017, 331, 116–128
  2. Toscano D*, Shaha SK**, Behravesh B**, Jahed H, Williams B, Effect of forging on the low cycle fatigue behavior of cast AZ31B alloy, Materials Science & Engineering: A, 2017, 706, 342-356
  3. Gryguc A*, Shaha S**, Behravesh B**, Jahed H, Wells M, Williams B, Su X, Monotonic and cyclic behaviour of cast and cast-forged AZ80 Mg, International Journal of Fatigue, 2017, 104, 136–149
  4. Sun M *, Behravesh SB **, Wu L, Zhou Y, Jahed H, Fatigue behavior of dissimilar Al 5052 and Mg AZ31 resistance spot welds with Sn-coated steel interlayer, Fatigue & Fracture of Engineering Materials & Structures, 2017, 40(7), 1048–1058
  5. Roostaei A*, Jahed H, Multiaxial cyclic behaviour and fatigue modelling of AM30 Mg alloy extrusion, International Journal of Fatigue, 2017, 97, 150–161
  6. Hadadzadeh A, Wells M, Shaha S**, Jahed H, Williams B, Role of compression direction on recrystallization behavior and texture evolution during hot deformation of extruded ZK60 magnesium alloy, Journal of Alloys and Compounds, 2017, 702, 274–289
  7. Karparvarfard A*,  Shaha S**, Behravesh B**, Jahed H, Williams B, Microstructure, texture, and mechanical behavior characterization of hot forged cast ZK60 magnesium alloy, Journal of Materials Science & Technology, 2017 , 33, 907-918
  8. Toscano D*, Shaha SK**, Behravesh B**, Jahed H, Williams B, Effect of forging on microstructure, texture, and uniaxial properties of cast AZ31B alloy, Journal of Materials Engineering and Performance, 2017, 26, 3090–3103
  9. Marzbanrad B*, Toyserkani E, Jahed H, Cyclic hysteresis of AZ31B extrusion under load-control tests using embedded sensor technology, Fatigue & Fracture of Engineering Materials & Structures, 2017, 40(2), 221–232
  10. Diab M*, Pang X, Jahed H, The effect of aluminum cold spray coating on corrosion and corrosion fatigue of AZ31B extrusion, Surface & Coatings Technology, 2017, 309, 423–435
  11. Jahadi R*, Sedighi, M, Jahed, H, Effects of aluminum and copper cover tube casing on the ECAP process of AM30 magnesium alloy, Materials and Manufacturing Processes, 2017, 32:12, 1375-1383

2016

  1. Roostaei A*, Jahed H, Role of loading direction on cyclic behaviour characteristics of AM30 extrusion and its fatigue damage modelling, Materials Science & Engineering: A, 2016, 670, 26–40
  2. Gryguc A*, Shaha S**, Jahed H, Wells M, Williams B, McKinley J, Tensile and fatigue behaviour of as-forged AZ31B extrusion, Fracture and Structural Integrity, 2016, 38, 251–258
  3. Khayamian M*, Behravesh SB**, Jahed H, Incorporation of asymmetric yield and hardening behaviour in axisymmetric elastoplastic problems, Materials and Design, 2016, 99, 490–499
  4. George J, Gross D, Jahed H, Roostaei A*, Fatigue life prediction of an automotive chassis system with combined hardening material model, SAE Technical Paper 2016, 2016-01-0378
  5. Marzbanrad B*, Jahed H, Toyserkani E, On the sensitivity and repeatability of fiber Bragg grating sensors used in strain and material degradation measurement of magnesium alloys under cyclic loads, International Journal of Advanced Manufacturing Technology, 2016, 86, 9–12, 3453–3461

2015

  1. Gryguc A*, Jahed H, Williams B, McKinley J, MagForge - mechanical behaviour of forged AZ31B extruded magnesium in monotonic compression, Materials Science Forum, 2015, 828–829, 291–297

2014

  1. Jahed H, Albinmousa, J, Multiaxial behaviour of wrought magnesium alloys–a review and suitability of energy-based fatigue life model, Theoretical and Applied Fracture Mechanics, 2014, 73, 97–108
  2. Shayegan G*, Mahmoudi-Asl H*, Ghilichi R, Villafuerte J, Weng J, Guagliano M, and Jahed H, Residual Stress Induced by Cold Spray Coating of Magnesium AZ31B Extrusion, Materials and Design, 2014, 60, 72–84
  3. Karimi M*, Jahed H, Khajepour A, Cohesive zone modeling of fatigue crack growth in brazed joints, Engineering Fracture Mechanics, 2014, 120, 43–59
  4. Behravesh B*, Jahed H, Lambert S, Chengji M, Constitutive modeling for cyclic behavior of AZ31B magnesium alloy and its application, Advanced Materials Research, 2014, 891–892, 809–814
  5. Albinmousa J*, Jahed H, Multiaxial effects on LCF behavior and fatigue failure of AZ31B magnesium extrusion, International Journal of Fatigue, 2014, 64, 103–116
  6. Behravesh B*, Jahed H, Lambert S, Fatigue characterization and modeling of AZ31B magnesium alloy spot-welds, International Journal of Fatigue, 2014, 64, 1–13
  7. Kalateh E*, Mahmoudi-Asl H*, Jahed H, An asymmetric elastic–plastic analysis of the load-controlled rotating bending test and its application in the fatigue life estimation of wrought magnesium AZ31B, International Journal of Fatigue, 2014, 64, 33–41
  8. Jahadi R*, Sedighi M, Jahed H, ECAP effect on the micro-structure and mechanical properties of AM30 magnesium alloy, Materials Science and Engineering: A, 2014, 593, 178–184
  9. Ghilichi R, Macdonald D, Bagherifard S, Brochu M, Jahed H, Jodoin B, Guagliano M, Fatigue strength of Al alloy cold sprayed with nanocrystalline powders, International Journal of Fatigue, 2014, 65, 51–57

2013

  1. Karimi M*, Jahed H, Khajepour A, Cohesive zone modeling of ductile tearing process in brazed joints, Engineering Fracture Mechanics, 2013, 102, 156–170
  2. Eshraghi A*, Papoulia K, Jahed H, Eulerian framework for inelasticity based on the Jaumann rate and a hyperelastic constitutive relation. Part I. Rate-form hyperelasticity, Journal of Applied Mechanics, 2013, 80(2), 021027-1-11
  3. Eshraghi A*, Jahed H, Papoulia K, Eulerian framework for inelasticity based on the Jaumann rate and a hyperelastic constitutive relation. Part II. Finite strain elastoplasticity, Journal of Applied Mechanics, 2013, 80(2), 021028-1–11

2012

  1. Ghelichi R, MacDonald D, Bagherifard S, Jahed H, Guagliano M, Jodoin B, Microstructure and fatigue behavior of cold spray coated Al5052, Acta Materialia, 2012, 60, 6555–6561
  2. Jahed H, Faritus M*, Jahed Z, Residual stress measurements in an autofrettaged tube using hole drilling method, Journal of Pressure Vessels Technology, Transaction of ASME, 2012, 134(5), 051501:1-7
  3. Khayamian M*, Jahed H, An anisotropic axisymmetric model for wrought magnesium alloys, Int J Advanced Design and Manufacturing Technology,5, 4, 7-11
  4. Noban M*, Jahed H, Varvani A, The choice of cyclic plasticity models in fatigue life assessment of 304 and 1045 steel alloys based on the critical plane-energy fatigue damage approach, International Journal of Fatigue, 2012, 43, 217–225
  5. Noban M*, Jahed H, Ibrahim E*, Ince A, Load path sensitivity and fatigue life estimation of 30CrNiMo8HH, International Journal of Fatigue, 2012, 37, 123133

2011

  1. Behravesh SB*, Jahed H, Lambert S, Characterization of magnesium spot welds under tensile and cyclic loadings, Materials and Design 32, 2011, 10, 48904900
  2. Albinmousa J*, Jahed H, Lambert S, Cyclic behaviour of wrought magnesium alloy under multiaxial loading, International Journal of Fatigue, 2011, 33 (11), 1403–1416
  3. Noban M**, Albinmousa J*, Jahed J, Lambert S, Continuum-based cyclic plasticity model for AZ31B magnesium alloy, Procedia Engineering, 2011, 10, 1366–1371
  4. Ghovanlou MK*Jahed H, Khajepour A, Mechanical reliability characterization of low carbon steel brazed joints with copper filler metal, Materials Science and Engineering: A, 2011, 528(19–20), 6146–6156
  5. Albinmousa J*, Jahed H, Lambert S, Cyclic axial and cyclic torsional behaviour of extruded AZ31B magnesium alloy, International Journal of Fatigue, 2011, 33(8), 1127–1139
  6. Noban M**, Jahed H, Winkler S, Ince A, Fatigue characterization and modeling of 30CrNiMo8HH under multiaxial loading, Materials Science and Engineering A, 2011, 528(6), 24842494

2010

  1. Eshraghi A*, Jahed H, Lambert S, A Lagrangian model for hardening behaviour of materials at finite deformation based on the right plastic stretch tensor, Journal of Materials and Design, 2010, 31, 2342–2354

2009

  1. Jahed H, Noban M**, Fatigue of electroformed nickel, Journal of Failure Analysis and Prevention, 2009, 9, 549–557
  2. Paryab N*, Jahed H, Khajepour A, Failure in single and double hot arm MEMS thermal actuators, Journal of Failure Analysis and Prevention, 2009, 9(2), 159–170

2008

  1. Jahed H, Farshi B, Eshraghi A*, Nasr A, A numerical optimization technique for design of wheel profiles, Wear journal, 2008, 264(1–2), 1–10

2007

  1. Noban H* Jahed H, Ratchetting strain, International Journal of Pressure Vessels and Piping, 2007, 84, 223–233
  2. Jahed H, Farshi B, Hosseini M*, The actual unloading behaviour effect on thermo-mechanical stresses and fatigue life of autofrettage tubes, International Journal of Fatigue, 2007, 29 (2), 360–369
  3. Jahed H, Farshi B, Hosseini M*, Life prediction of autofrettage tubes using actual material behaviour, International Journal of Pressure Vessels and Piping, 2007, 83(10), 749–755
  4. Jahed H, Varvani A, Noban M*, Khalaji I*, An energy-based fatigue life assessment model for various metallic materials under proportional and non-proportional loading conditions, International Journal of Fatigue, 2007, 29(4), 647–655

2006

  1. Jahed H, Ahmadi B*, Shambouli M*, Re-autofrettage, Journal of Pressure Vessels Technology, Transaction of ASME, 2006, 128, 223–226
  2. Jahed H, Farshi B, Karimi M*, Optimum autofrettage and shrink-fit combination in multi-layer cylinders, Journal of Pressure Vessels Technology, Transaction of ASME, 2006, 128, 196–200
  3. Jahed H, Varvani A, Upper and lower fatigue life limits predictions using energy-based fatigue properties, International Journal of Fatigue, 2006, 28, 467–473

2005

  1. Jahed, H, Farshi B, Bidabadi J*, Minimum weight design of inhomogeneous rotating siscs, International Journal of Pressure Vessels and Piping, 2005, 82, 35–41

2004

  1.  Farshi B, Jahed H, Mehrabian A*, Optimum design of inhomogeneous non-uniform rotating discs, Computers and Structures, 2004, 82(9–10), 773–779
  2. Jahed H, Heydari Z*, Hosseininia M*, Optimum pressure for autofrettage with Bauschinger effect consideration, International Journal of Engineering Sciences, 2004, 17(5), 123–135
  3. Jahed H, Ahmadian H, Khoshnavaz H*, High cycle fatigue life prediction of a turbine rotor blade under resonance stresses, International Journal of Engineering Science, 2004, 17(4), 1–14

2003

  1. Jahed H, Ghanbari G*, Actual unloading behaviour and its significance on residual stress in machined autofrettage tubes, Journal of Pressure Vessels Technology, Transaction of ASME, 2003, 125, 321–325
  2. Jahed H, Bidabadi J*, An axisymmetric method of creep analysis for primary and secondary creep, International Journal of Pressure Vessels and Piping, 2003, 80(9), 597–606

2002

  1. Jahed H, Mechanical Engineering Education in Iran: Present Situation, Iranian Journal of Engineering Education, Iran Science Academy, 2002, 14, 27–39
  2. Jahed H, Arjangian M*, Crack stress analysis and plasticity using bounded value of stress at the crack tip, International Journal of Engineering Science, 2002, 13(3), 73–87

2001

  1. Jahed H, Shirazi R*, Loading and unloading behaviour of a thermoplastic disc, International Journal of Pressure Vessels and Piping, 2001, 78(9), 637–645

2000

  1. Jahed H, Lambert SB, Dubey RN, Variable material property method in the analysis of cold-worked fastener holes, Journal of Strain Analysis for Engineering Design, 2000, 35(2), 137–142
  2. Jahed H, Ramezani M*, Residual stress field prediction in cold worked fastener holes, International Journal of Engineering Sciences, 2000, 11(3), 165–185

1998

  1. Jahed H, Lambert SB, Dubey RN, Total deformation theory for non-proportional loading, International Journal of Pressure Vessels and Piping, 1998, 75, 633–642

1997

  1. Jahed, H, Sethuraman R, Dubey RN, A Variable Material Property approach for solving elastic-plastic problems, International Journal Pressure Vessels & Piping, 1997, 72, 285–293
  2. Jahed H, Dubey RN, An axisymmetric method of elastic-plastic analysis capable of predicting residual stress field, Journal of Pressure Vessels Technology, Transaction of ASME, 1997, 119, 264–273

1984

  1. Casey J, Jahedmotlagh H, The strength-differential effect in plasticity, International Journal of Solids Structures, 1984, 20(4), 377–393