Sort by: Author Type Year

2019

Joshi, V. V., B. J Jordon, D. Orlov, and N. R. Neelameggham, Magnesium Technology 2019: Springer, 2019.
Faghih, S., SK. Shaha, SB. Behravesh, and H. Jahed, "Effect of Split Sleeve Cold Expansion on the Residual Stress, Texture and Fatigue Life of Rolled AZ31B Magnesium Alloy", Magnesium Technology 2019: Springer, Cham, pp. 353–358, 2019.
Prakash, P., A. Hadadzadeh, S. Kumar Shaha, M. A. Whitney, M. A. Wells, H. Jahed, and B. W. Williams, "Microstructure and Texture Evolution During Hot Compression of Cast and Extruded AZ80 Magnesium Alloy", Magnesium Technology 2019: Springer, Cham, pp. 89–94, 2019.
Toscano, D., SK. Shaha, B. Behravesh, H. Jahed, and B. Williams, "Multiaxial Cyclic Response of Low Temperature Closed-Die Forged AZ31B Mg Alloy", Magnesium Technology 2019: Springer, Cham, pp. 289–296, 2019.
Marzbanrad, B., E. Toyserkani, and H. Jahed, "Multi-Layer Cold Spray Coating: Strain Distribution", Key Engineering Materials, vol. 813: Trans Tech Publications Ltd, pp. 411–416, 2019.
Pahlevanpour, AH., SB. Behravesh, S. Adibnazari, and H. Jahed, "Characterization of Anisotropic Behaviour of ZK60 Extrusion under Stress-control Condition and Notes on Fatigue Modeling", International Journal of Fatigue: Elsevier, 2019.
Shaha, S. Kumar, and H. Jahed, "Characterization of Nanolayer Intermetallics Formed in Cold Sprayed Al Powder on Mg Substrate", Materials, vol. 12, no. 8: Multidisciplinary Digital Publishing Institute, pp. 1317, 2019.
Xue, Y., X. Pang, B. Jiang, and H. Jahed, "Corrosion and corrosion fatigue performances of micro-arc oxidation coating on AZ31B cast magnesium alloy", Materials and Corrosion, vol. 70, no. 2, pp. 268–280, 2019.
Esmaeilizadeh, R., A. Keshavarzkermani, U. Ali, Y. Mahmoodkhani, B. Behravesh, H. Jahed, A. Bonakdar, and E. Toyserkani, "Customizing mechanical properties of additively manufactured Hastelloy X parts by adjusting laser scanning speed", Journal of Alloys and Compounds: Elsevier, pp. 152097, 2019.
Ahmed, M., A. Z. Yazdi, S. B. Dayani, H. Jahed, and P. Chen, "Fabrication of Zinc Anodes for Aqueous Lithium-Ion Batteries by Supersonic Cold Spraying", ChemElectroChem, vol. 6, no. 5, pp. 1333–1337, 2019.
Karparvarfard, SMH., S. K. Shaha, S. Behzad Behravesh, H. Jahed, and B. W. Williams, "Fatigue characteristics and modeling of cast and cast-forged ZK60 magnesium alloy", International Journal of Fatigue, vol. 118: Elsevier, pp. 282–297, 2019.
Ling, Y., A. A. Roostaei, G. Glinka, and H. Jahed, "Fatigue of ZEK100-F magnesium alloy: Characterisation and modelling", International Journal of Fatigue, vol. 125: Elsevier, pp. 179–186, 2019.
Gryguc, A., SB. Behravesh, SK. Shaha, H. Jahed, M. Wells, B. Williams, and X. Su, "Multiaxial cyclic behaviour of extruded and forged AZ80 Mg alloy", International Journal of Fatigue: Elsevier, 2019.
Roostaei, A. A., A. Pahlevanpour, S. Behzad Behravesh, and H. Jahed, "On the definition of elastic strain energy density in fatigue modelling", International Journal of Fatigue, vol. 121: Elsevier, pp. 237–242, 2019.
Abbasi, B., S. Abbasi, O. Abdelaziz, D. Abdou, A. H Najafabadi, A. Abu-Heiba, D. Acharya, R. Acharya, D. Açikkalp, A. Affanni, et al., "Reviewer’s Recognition", Journal of Thermal Science and Engineering Applications, vol. 11, pp. 010201–1, 2019.
Khodabakhshi, F., B. Marzbanrad, LH. Shah, H. Jahed, and AP. Gerlich, "Surface Modification of a Cold Gas Dynamic Spray-Deposited Titanium Coating on Aluminum Alloy by using Friction-Stir Processing", Journal of Thermal Spray Technology, vol. 28, no. 6: Springer US, pp. 1185–1198, 2019.
Wang, J., X. Pang, and H. Jahed, Surface protection of Mg alloys in automotive applications: A review: Aims Press, 2019.
Abdo, Y., H. Abedi, S. Adachi, R. Ahmed, B. Aldwell, Y. An, PV. Ananthapadmanabhan, A. S. M. Ang, S. Armada, G. Armstrong, et al., Thanks to Our Guest Editors and Reviewers for Their Critical Contributions in 2018: Springer, 2019.
Qian, L. Feng Victo, A. A. Roostaei, U. Dighrasker, G. Glinka, and H. Jahed, Notch Plasticity and Fatigue Modelling of AZ31B-H24 Magnesium Alloy Sheet: SAE Technical Paper, 2019.

2018

Shaha, SK., SB. Dayani, and H. Jahed, "Fatigue life enhancement of cast Mg alloy by surface modification in cold spray process", MATEC Web of Conferences, vol. 165: EDP Sciences, pp. 03014, 2018.
Karparvarfard, SMH., SK. Shaha, SB. Behravesh, H. Jahed, and B. Williams, "Fatigue life improvement of cast ZK60 Mg alloy through low temperature closed-die forging for automotive applications", MATEC Web of Conferences, vol. 165: EDP Sciences, pp. 06009, 2018.
Shaha, SK., SB. Dayani, and H. Jahed, "Influence of cold spray on the enhancement of corrosion fatigue of the AZ31B cast Mg alloy", TMS Annual Meeting & Exhibition: Springer, Cham, pp. 541–550, 2018.
Shaha, SK., B. Marzbanrad, and H. Jahed, "Influence of Cold Spray on the Microstructure and Residual Stress of Resistance Spot Welded Steel-Mg", TMS Annual Meeting & Exhibition: Springer, Cham, pp. 635–644, 2018.
Toscano, D., SK. Shaha, B. Behravesh, H. Jahed, B. Williams, and X. Su, "Influence of low temperature forging on microstructure and low cycle fatigue behavior of cast AZ31B Mg alloy", TMS Annual Meeting & Exhibition: Springer, Cham, pp. 267–273, 2018.
Roostaei, A. A., and H. Jahed, "A cyclic small-strain plasticity model for wrought Mg alloys under multiaxial loading: Numerical implementation and validation", International Journal of Mechanical Sciences, vol. 145: Pergamon, pp. 318–329, 2018.
Wang, J., H. Jahed, and X. Pang, A two-stage conversion process for AZ31B corrosion: CSME-SCGM, 2018.
Pahlevanpour, A., S. Behzad Behravesh, and H. Jahed, Anisotropic Fatigue Modeling Of Wrought Magnesium Alloys: CSME-SCGM, 2018.
Pahlevanpour, A. H., S. M. H. Karparvarfard, S. K. Shaha, S. Behzad Behravesh, S. Adibnazari, and H. Jahed, "Anisotropy in the quasi-static and cyclic behavior of ZK60 extrusion: Characterization and fatigue modeling", Materials & Design, vol. 160: Elsevier, pp. 936–948, 2018.
Pahlevanpour, A., B. Marzbanrad, S. Behzad Behravesh, and H. Jahed, Application Of Fiber Bragg Grating Sensor For Strain Measurement At The Notch Tip Under Cyclic Loading: CSME-SCGM, 2018.
Hajipour, H., A. Abdollah-zadeh, H. Assadi, E. Taheri-Nassaj, and H. Jahed, "Effect of Feedstock Powder Morphology on Cold-Sprayed Titanium Dioxide Coatings", Journal of Thermal Spray Technology, vol. 27, no. 8: Springer US, pp. 1542–1550, 2018.
Shaha, S. Kumar, S. Borhan Dayani, Y. Xue, X. Pang, and H. Jahed, "Improving corrosion and corrosion-fatigue resistance of AZ31B cast Mg alloy using combined cold spray and top coatings", Coatings, vol. 8, no. 12: Multidisciplinary Digital Publishing Institute, pp. 443, 2018.
Xue, Y., X. Pang, B. Jiang, and H. Jahed, "Influence of Micro-arc Oxidation Coatings on Corrosion Performances of AZ80 cast alloy", Int. J. Electrochem. Sci, vol. 13, pp. 7265–7281, 2018.
Khodabakhshi, F., B. Marzbanrad, H. Jahed, and A. P. Gerlich, "Interfacial bonding mechanisms between aluminum and titanium during cold gas spraying followed by friction-stir modification", Applied Surface Science, vol. 462: North-Holland, pp. 739–752, 2018.
Gryguc, A., S. Behzad Behravesh, S. K. Shaha, H. Jahed, M. Wells, B. Williams, and X. Su, "Low-cycle fatigue characterization and texture induced ratcheting behaviour of forged AZ80 Mg alloys", International Journal of Fatigue, vol. 116: Elsevier, pp. 429–438, 2018.
Marzbanrad, B., H. Jahed, and E. Toyserkani, "On the evolution of substrate's residual stress during cold spray process: a parametric study", Materials & Design, vol. 138: Elsevier, pp. 90–102, 2018.
Dayani, SB., SK. Shaha, R. Ghelichi, JF. Wang, and H. Jahed, "The impact of AA7075 cold spray coating on the fatigue life of AZ31B cast alloy", Surface and Coatings Technology, vol. 337: Elsevier, pp. 150–158, 2018.
Faghih, S., H. Jahed, and S. Behzad Behravesh, "Variable Material Properties Approach: A Review on Twenty Years of Progress", Journal of Pressure Vessel Technology, vol. 140, no. 5: American Society of Mechanical Engineers, pp. 050803, 2018.

2017

Solanki, K. N., D. Orlov, A. Singh, and N. R. Neelameggham, Magnesium Technology 2017: Springer, 2017.
Karparvarfard, SMH., SK. Shaha, A. Hadadzadeh, SB. Behravesh, H. Jahed, MA. Wells, and B. Williams, "Characterization of Semi-Closed Die-Forged ZK60 Mg Alloy Extrusion", Magnesium Technology 2017: Springer, Cham, pp. 329–334, 2017.
Hadadzadeh, A., S. Kumar Shaha, M. A. Wells, H. Jahed, and B. W. Williams, "Microstructure and Texture Evolution During Hot Deformation of Cast-Homogenized ZK60 Magnesium Alloy", Magnesium Technology 2017: Springer, Cham, pp. 513–519, 2017.
Gryguc, A., S. K. Shaha, S. B. Behravesh, H. Jahed, M. Wells, and B. Williams, "Compression Behaviour of Semi-closed Die Forged AZ80 Extrusion", The Minerals, Metals & Materials, vol. 2017: Springer, pp. pp–361, 2017.
Toscano, D., SK. Shaha, B. Behravesh, H. Jahed, M. Wells, B. Williams, and J. McKinley, "Effect of Forging on Microstructure, Texture and Compression Behavior of Extruded AZ31B", Proceedings of the 3rd Pan American Materials Congress: Springer, Cham, pp. 347–354, 2017.
Marzbanrad, B., E. Toyserkani, and H. Jahed, "Cyclic hysteresis of AZ31B extrusion under load-control tests using embedded sensor technology", Fatigue & Fracture of Engineering Materials & Structures, vol. 40, no. 2, pp. 221–232, 2017.
Toscano, Shaha, Behravesh, Jahed, and Williams, "Effect of Forging on Microstructure, Texture, and Uniaxial Properties of Cast AZ31B Alloy", Journal of Materials Engineering and Performance, vol. 26, no. 7: Springer, pp. 3090–3103, 2017.
Toscano, D., S. K. Shaha, B. Behravesh, H. Jahed, and B. Williams, "Effect of forging on the low cycle fatigue behavior of cast AZ31B alloy", Materials Science and Engineering: A, vol. 706: Elsevier, pp. 342–356, 2017.
Jahadi, R., M. Sedighi, and H. Jahed, "Effects of aluminum and copper cover tube casing on the ECAP process of AM30 magnesium alloy", Materials and Manufacturing Processes, vol. 32, no. 12: Taylor & Francis, pp. 1375–1383, 2017.
Sun, M., SB. Behravesh, L. Wu, Y. Zhou, and H. Jahed, "Fatigue behaviour of dissimilar Al 5052 and Mg AZ31 resistance spot welds with Sn-coated steel interlayer", Fatigue & Fracture of Engineering Materials & Structures, vol. 40, no. 7, pp. 1048–1058, 2017.
Khodabakhshi, F., B. Marzbanrad, LH. Shah, H. Jahed, and AP. Gerlich, "Friction-stir processing of a cold sprayed AA7075 coating layer on the AZ31B substrate: structural homogeneity, microstructures and hardness", Surface and Coatings Technology, vol. 331: Elsevier, pp. 116–128, 2017.
Karparvarfard, SMH., S. K. Shaha, S. Behzad Behravesh, H. Jahed, and B. W. Williams, "Microstructure, texture and mechanical behavior characterization of hot forged cast ZK60 magnesium alloy", Journal of materials science & technology, vol. 33, no. 9: Elsevier, pp. 907–918, 2017.
Gryguc, A., S. K. Shaha, S. Behzad Behravesh, H. Jahed, M. Wells, B. Williams, and X. Su, "Monotonic and cyclic behaviour of cast and cast-forged AZ80 Mg", International Journal of Fatigue, vol. 104: Elsevier, pp. 136–149, 2017.
Roostaei, A. A., and H. Jahed, "Multiaxial cyclic behaviour and fatigue modelling of AM30 Mg alloy extrusion", International Journal of Fatigue, vol. 97: Elsevier, pp. 150–161, 2017.
Hadadzadeh, A., M. A. Wells, S. Kumar Shaha, H. Jahed, and B. W. Williams, "Role of compression direction on recrystallization behavior and texture evolution during hot deformation of extruded ZK60 magnesium alloy", Journal of Alloys and Compounds, vol. 702: Elsevier, pp. 274–289, 2017.
Diab, M., X. Pang, and H. Jahed, "The effect of pure aluminum cold spray coating on corrosion and corrosion fatigue of magnesium (3% Al-1% Zn) extrusion", Surface and Coatings Technology, vol. 309: Elsevier, pp. 423–435, 2017.

2016

Behravesh, S. B., E. Ibrahim, and H. Jahed, "Fatigue failure analysis of welded structures: An overview and A case study", Handbook of Materials Failure Analysis with Case Studies from the Chemicals, Concrete and Power Industries: Butterworth-Heinemann, pp. 355–386, 2016.
Khayamian, M. Ali, B. Behravesh, and H. Jahed, "Incorporation of asymmetric yield and hardening behaviour in axisymmetric elastoplastic problems", Materials & Design, vol. 99: Elsevier, pp. 490–499, 2016.
Marzbanrad, B., H. Jahed, and E. Toyserkani, "On the sensitivity and repeatability of fiber Bragg grating sensors used in strain and material degradation measurement of magnesium alloys under cyclic loads", The International Journal of Advanced Manufacturing Technology, vol. 86, no. 9-12: Springer London, pp. 3453–3461, 2016.
Roostaei, A. A., and H. Jahed, "Role of loading direction on cyclic behaviour characteristics of AM30 extrusion and its fatigue damage modelling", Materials Science and Engineering: A, vol. 670: Elsevier, pp. 26–40, 2016.
Gryguc, A., SK. Shaha, H. Jahed, M. Wells, B. Williams, and J. McKinley, "Tensile and fatigue behaviour of as-forged AZ31B extrusion", Frattura ed Integrità Strutturale, vol. 10, no. 38, pp. 251–258, 2016.
George, J. K., D. Gross, H. Jahed, and A. Asghar Roostaei, Fatigue Life Prediction of an Automotive Chassis System with Combined Hardening Material Model: Society of Automotive Engineers, 2016.
Wong, T. Wun Rick, High Temperature Forging of AZ31B Magnesium Alloy: University of Waterloo, 2016.

2015

Makhlouf, A. Salam Hamd, and M. Aliofkhazraei, Handbook of Materials Failure Analysis with Case Studies from the Chemicals, Concrete and Power Industries: Butterworth-Heinemann, 2015.
Jahed, H., and R. Ghelichi, "Residual stresses and fatigue life enhancement of cold spray", Modern Cold Spray: Springer, Cham, pp. 225–252, 2015.
A., G., J. H., W. B., and MK. J., "MagForge - Mechanical Behaviour of Forged AZ31B Extruded Magnesium in Monotonic Compression", Materials Science Forum, vol. 828, pp. 291–297, 2015.
Lu, Z. Bing, C. Yong Wang, P. Zhang, and X. Yi Zhang, "Review of Research Progress of Prestressed Treatment to the Thick-Walled Cylindrical Parts", Materials Science Forum, vol. 817: Trans Tech Publ, pp. 164–172, 2015.
Marzbanrad, B., Behaviour of Magnesium Alloy Under Load-Control Cyclic Testing: University of Waterloo, 2015.

2014

Behravesh, S. Behzad, H. Jahed, S. B. Lambert, and M. Chengji, "Constitutive modeling for cyclic behavior of AZ31B magnesium alloy and its application", Advanced Materials Research, vol. 891: Trans Tech Publications, pp. 809–814, 2014.
Kalatehmollaei, E., H. Mahmoudi-Asl, and H. Jahed, "An asymmetric elastic–plastic analysis of the load-controlled rotating bending test and its application in the fatigue life estimation of wrought magnesium AZ31B", International Journal of Fatigue, vol. 64: Elsevier, pp. 33–41, 2014.
Ghovanlou, M. K., H. Jahed, and A. Khajepour, "Cohesive zone modeling of fatigue crack growth in brazed joints", Engineering Fracture Mechanics, vol. 120: Pergamon, pp. 43–59, 2014.
Jahadi, R., M. Sedighi, and H. Jahed, "ECAP effect on the micro-structure and mechanical properties of AM30 magnesium alloy", Materials Science and Engineering: A, vol. 593: Elsevier, pp. 178–184, 2014.
Behravesh, S. Behzad, H. Jahed, and S. Lambert, "Fatigue characterization and modeling of AZ31B magnesium alloy spot-welds", International Journal of Fatigue, vol. 64: Elsevier, pp. 1–13, 2014.
Ghelichi, R., S. Bagherifard, D. Mac Donald, M. Brochu, H. Jahed, B. Jodoin, and M. Guagliano, "Fatigue strength of Al alloy cold sprayed with nanocrystalline powders", International Journal of Fatigue, vol. 65: Elsevier, pp. 51–57, 2014.
Jahed, H., and J. Albinmousa, "Multiaxial behaviour of wrought magnesium alloys–A review and suitability of energy-based fatigue life model", Theoretical and Applied Fracture Mechanics, vol. 73: Elsevier, pp. 97–108, 2014.
Albinmousa, J., and H. Jahed, "Multiaxial effects on LCF behaviour and fatigue failure of AZ31B magnesium extrusion", International Journal of Fatigue, vol. 67: Elsevier, pp. 103–116, 2014.
Shayegan, G., H. Mahmoudi, R. Ghelichi, J. Villafuerte, J. Wang, M. Guagliano, and H. Jahed, "Residual stress induced by cold spray coating of magnesium AZ31B extrusion", Materials & Design, vol. 60: Elsevier, pp. 72–84, 2014.

2013

M Ghovanlou, K., H. Jahed, and A. Khajepour, "CZM Application to Failure Study of Brazed Joints: Parameters Determination", ICF12, Ottawa 2009, 2013.
SB, B., J. H, and L. S, "Fatigue Characterization and Modeling of AZ31B Spot-welded Joints", ASME 2013 International Mechanical Engineering Congress & Exposition, IMECE2013, San Diego, California, 2013.
Ghovanlou, M. K., H. Jahed, and A. Khajepour, "Cohesive zone modeling of ductile tearing process in brazed joints", Engineering Fracture Mechanics, vol. 102: Pergamon, pp. 156–170, 2013.
Eshraghi, A., K. D. Papoulia, and H. Jahed, "Eulerian framework for inelasticity based on the Jaumann rate and a hyperelastic constitutive relation—Part I: Rate-form hyperelasticity", Journal of Applied Mechanics, vol. 80, no. 2: American Society of Mechanical Engineers, pp. 021027, 2013.
Eshraghi, A., H. Jahed, and K. D. Papoulia, "Eulerian Framework for Inelasticity Based on the Jaumann Rate and a Hyperelastic Constitutive Relation—Part II: Finite Strain Elastoplasticity", Journal of Applied Mechanics, vol. 80, no. 2: American Society of Mechanical Engineers, pp. 021028, 2013.

2012

Ghelichi, R., D. MacDonald, S. Bagherifard, H. Jahed, M. Guagliano, B. Jodoin, and others, "FATIGUE BEHAVIOR OF NANO-CRYSTALLINE COLD SPRAY COATED SPECIMENS", XVI International Colloquium on Mechanical Fatigue of Metals, pp. 87–94, 2012.
Mahmoudi, H., H. Jahed, and J. Villafuerte, "The effect of cold spray coating on fatigue life of AZ31B", 9th International conference on magnesium alloys and their applications, Vancouver, BC, Canada, 2012.
Jahed, H., and MA. Khayamian, An anisotropic axisymmetric model for wrought magnesium alloys: INTERNATIONAL JOURNAL OF ADVANCED DESIGN AND MANUFACTURING TECHNOLOGY, 2012.
Dubey, A. Manas, and H. Jahed, "Department of Mechanical Engineering", Trends in Structural Mechanics: Theory, Practice, Education, vol. 54: Springer Science & Business Media, pp. 15, 2012.
EkhteraeiToussi, H., and M. RezaeiFarimani, "Elasto-plastic deformation analysis of rotating disc beyond its limit speed", International Journal of Pressure Vessels and Piping, vol. 89: Elsevier, pp. 170–177, 2012.
KALATEH, MOLLAEI. E., and H. Jahed, Load Controlled Fatigue of AZ31B: JOURNAL OF MECHANICAL RESEARCH AND APPLICATION (JMRA), 2012.
Noban, M., H. Jahed, E. Ibrahim, and A. Ince, "Load path sensitivity and fatigue life estimation of 30CrNiMo8HH", International Journal of Fatigue, vol. 37: Elsevier, pp. 123–133, 2012.
Ghelichi, R., D. MacDonald, S. Bagherifard, H. Jahed, M. Guagliano, and B. Jodoin, "Microstructure and fatigue behavior of cold spray coated Al5052", Acta Materialia, vol. 60, no. 19: Pergamon, pp. 6555–6561, 2012.
Jahed, H., M. Reza Faritus, and Z. Jahed, "Residual stress measurements in an autofrettage tube using hole drilling method", Journal of Pressure Vessel Technology, vol. 134, no. 5: American Society of Mechanical Engineers, pp. 051501, 2012.
Tajik, A., and H. Jahed, "Standalone Tensile Testing of Thin Film Materials for MEMS/NEMS Applications", Microelectromechanical Systems and Devices: BoD–Books on Demand, pp. 435, 2012.
Noban, M., H. Jahed, and A. Varvani-Farahani, "The choice of cyclic plasticity models in fatigue life assessment of 304 and 1045 steel alloys based on the critical plane-energy fatigue damage approach", International Journal of Fatigue, vol. 43: Elsevier, pp. 217–225, 2012.
HOSEINY, SHAVOUN. A. M. I. N., and HOSSEINALI. JAHED, The viewpoint of faculty members on research obstacles at Tabriz University: JOURNAL OF SCIENCE AND TECHNOLOGY POLICY, 2012.

2011

Badarinarayan, H., SB. Behravesh, SD. Bhole, DL. Chen, J. Grantham, MF. Horstemeyer, H. Jahed, JB. Jordon, S. Lambert, HA. Patel, et al., "Monotonic and Fatigue Behavior of Mg Alloy Friction Stir Spot Welds: An International Benchmark Test in the “Magnesium Front End Research and Development” Project", Magnesium Technology 2011: Springer, Cham, pp. 629–634, 2011.
R, G., G. M, J. H, and V. J, "63. Ghilichi R, Gagiliano M, Jahed H, Villafuerte J, (2011), “A method for residual stress estimation of AZ31 under cold spray coating", International Thermal Spray Conference and Exposition ITSC2011, 2011.
Ghelichi, R., M. Guagliano, H. Jahed, J. Villafuerte, and others, "A Method for Residual Stress Estimation of AZ31 under Cold Spray Coating", International Conference on thermal Spray 2011, pp. 1–6, 2011.
Kasaiezadeh, A., A. Khajepour, and H. Jahed, "Using level set method in order to design structures against buckling", ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: American Society of Mechanical Engineers Digital Collection, pp. 1225–1231, 2011.
Behravesh, S. Behzad, H. Jahed, and S. Lambert, "Characterization of magnesium spot welds under tensile and cyclic loadings", Materials & Design, vol. 32, no. 10: Elsevier, pp. 4890–4900, 2011.
Albinmousa, J., H. Jahed, and S. Lambert, "Cyclic axial and cyclic torsional behaviour of extruded AZ31B magnesium alloy", International Journal of Fatigue, vol. 33, no. 11: Elsevier, pp. 1403–1416, 2011.
Albinmousa, J., H. Jahed, and S. Lambert, "Cyclic behaviour of wrought magnesium alloy under multiaxial load", International Journal of Fatigue, vol. 33, no. 8: Elsevier, pp. 1127–1139, 2011.
Ghovanlou, M. Karimi, Failure analysis of brazed joints using the CZM approach: University of Waterloo, 2011.
Noban, M., H. Jahed, S. Winkler, and A. Ince, "Fatigue characterization and modeling of 30CrNiMo8HH under multiaxial loading", Materials Science and Engineering: A, vol. 528, no. 6: Elsevier, pp. 2484–2494, 2011.
Ghovanlou, M. K., H. Jahed, and A. Khajepour, "Mechanical reliability characterization of low carbon steel brazed joints with copper filler metal", Materials Science and Engineering: A, vol. 528, no. 19-20: Elsevier, pp. 6146–6156, 2011.

2010

SB, B., L. L, J. H, L. S, G. G, and Z. Y, "72. Behravesh SB, Liu L, Jahed H, Lambert S, Glinka G, Zhou Y, “Fatigue properties of resistance spot welded AZ31magnesium alloy", SAE2010 World Congress, Detroit, US: SAE, 2010.
Albinmousa, J., H. Jahed, and S. Lambert, "An energy-based fatigue model for wrought magnesium alloy under multiaxial load", ICMFF9, 2010.
Eshraghi, A., H. Jahed, and S. Lambert, "A Lagrangian model for hardening behaviour of materials at finite deformation based on the right plastic stretch tensor", Materials & Design (1980-2015), vol. 31, no. 5: Elsevier, pp. 2342–2354, 2010.
Jahed, H., MR. Noban, and MA. Eshraghi, "ANSYS finite element", Iran: University Tehran, 2010.
Imbert, J., H. Jahed, W. Owen, and G. Stubley, "Interactive Learning Applied in Undergraduate Mechanical and Mechatronics Courses at the University of Waterloo", Proceedings of the Canadian Engineering Education Association (CEEA), 2010.
Behravesh, B., L. Liu, H. Jahed, S. Lambert, G. Glinka, and N. Zhou, Effect of nugget size on tensile and fatigue strength of spot welded AZ31 magnesium alloy: SAE Technical Paper, 2010.
Albinmousa, J., A. Pascu, H. Jahed, MF. Horstemeyer, A. Luo, D. Chen, S. Lambert, J. Jordon, S. Begum, X. Su, et al., Monotonic and Fatigue Behavior of Magnesium Extrusion Alloy AM30: An International Benchmark Test in the “Magnesium Front End Research and Development Project”: SAE Technical Paper, 2010.
Albinmousa, J., H. Jahed, and S. Lambert, "Monotonic and Multiaxial Cyclic Behavior of the Extruded AZ 31 B Magnesium Alloy", Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 USA.[np]. 14-18 Feb: Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box …, 2010.

2009

Eshraghi, A., H. Jahed, and S. Lambert, "A finite deformation constitutive model for the prediction of cyclic behavior of shape memory alloys", 12 th International Conference of Fracture (ICF12), Ottawa, Canada, 2009.
Paryab, N., H. Jahed, and A. Khajepour, "Creep and fatigue failure in single-and double hot arm MEMS thermal actuators", Journal of failure analysis and prevention, vol. 9, no. 2: Springer US, pp. 159–170, 2009.
Jahed, H., and M. Noban, "Fatigue of Electroformed Nickel", Journal of failure analysis and prevention, vol. 9, no. 6: Springer US, pp. 549, 2009.
李艳, 刘新明, and others, "车轮外形设计的数值优化方法", 国外铁道车辆, no. 2, pp. 20–27, 2009.

2008

Noban, M., and H. Jahed, "A Fast Method for Ratchetting Strain Prediction", ASME 2006 Pressure Vessels and Piping/ICPVT-11 Conference: American Society of Mechanical Engineers Digital Collection, pp. 345–352, 2008.
Jahed, H., B. Farshi, and M. Karimi, "Optimum design of multi-layered vessels", ASME 2005 Pressure Vessels and Piping Conference: American Society of Mechanical Engineers Digital Collection, pp. 207–213, 2008.
Jahed, H., B. Farshi, M. A. Eshraghi, and A. Nasr, "A numerical optimization technique for design of wheel profiles", Wear, vol. 264, no. 1-2: Elsevier, pp. 1–10, 2008.

2007

Jahed, H., A. Varvani-Farahani, M. Noban, and I. Khalaji, "An energy-based fatigue life assessment model for various metallic materials under proportional and non-proportional loading conditions", International journal of fatigue, vol. 29, no. 4: Elsevier, pp. 647–655, 2007.
Noban, M., and H. Jahed, "Ratchetting strain prediction", International Journal of Pressure Vessels and Piping, vol. 84, no. 4: Elsevier, pp. 223–233, 2007.
Jahed, H., B. Farshi, and M. Hosseini, "The actual unloading behavior effect on thermo-mechanical stress intensity factor and life of autofrettage tubes", International journal of fatigue, vol. 29, no. 2: Elsevier, pp. 360–369, 2007.

2006

H, J., V. A, N. M, and K. I, "Energy based life prediction model for non-proportional loading", 9th international Fatigue congress 2006, Atlanta, US, 2006.
Paryab, N., H. Jahed, and A. Khajepour, "Failure mechanisms of MEMS thermal actuators", ASME 2006 International Mechanical Engineering Congress and Exposition: American Society of Mechanical Engineers Digital Collection, pp. 397–406, 2006.
Jahed, H., B. Farshi, and M. Hosseini, "Fatigue life prediction of autofrettage tubes using actual material behaviour", International journal of pressure vessels and piping, vol. 83, no. 10: Elsevier, pp. 749–755, 2006.
Jahed, H., B. Farshi, and M. Karimi, "Optimum autofrettage and shrink-fit combination in multi-layer cylinders", Journal of Pressure Vessel Technology, vol. 128, no. 2: American Society of Mechanical Engineers, pp. 196–200, 2006.
Moghadam, B. Ahmadi, and M. Shambooli, "Re-Autofrettage", Journal of Pressure Vessel Technology, vol. 128, pp. 223, 2006.
Jahed, H., B. Ahmadi Moghadam, and M. Shambooli, "Re-autofrettage", Journal of pressure vessel technology, vol. 128, no. 2: American Society of Mechanical Engineers, pp. 223–226, 2006.
Jahed, H., and A. Tajik, "Trebuchet Design", ME380 Project Manual, 2006.
Jahed, H., and A. Varvani-Farahani, "Upper and lower fatigue life limits model using energy-based fatigue properties", International journal of fatigue, vol. 28, no. 5-6: Elsevier, pp. 467–473, 2006.

2005

H, J., F. B, and K. M, "91. Jahed H, Farshi B and Karimi M*, 2005, “ Optimum Design of Multi-Layer Vessels", PVP 2005 conference, Denver, Colorado, vol. 71543: ASME PVP, 2005.
H, A. B. Jahed, and S. M, "Re-autofrettage, A fatigue life enhancement method", 2nd GT conference, Oxford, England, vol. 1, 2005.
Jahed, H., and M. Noban, "Chapter Four Proportional analysis of non-proportional loadings", WIT Transactions on State-of-the-art in Science and Engineering, vol. 1: WIT Press, 2005.
Jahed, H., B. Farshi, and J. Bidabadi, "Minimum weight design of inhomogeneous rotating discs", International Journal of Pressure Vessels and Piping, vol. 82, no. 1: Elsevier, pp. 35–41, 2005.
Jahed, H., B. Farshi, and M. Karimi, PVP2005-71543, 2005.
H, J., F. B, N. A, and A. Eshraghi, IR1002: Wheel Profile Compatible with Iran Rail Tracks, 2005.

2004

H, ahed., R. S, T. A, and S. K, "Rapid Prototyping of Starch- Based Bone Tissue Engineering Scaffolds", International Conference on Biomedical Engineering, IFBME, vol. 7, pp. 369–372, 2004.
H., J., A. H., and K. H., "High Cycle Fatigue life Prediction of a Turbine Rotor Blade under Resonance Stresses", International Journal of Engineering Science, vol. 17, no. 4, pp. 1–14, 2004.
Farshi, B., H. Jahed, and A. Mehrabian, "Optimum design of inhomogeneous non-uniform rotating discs", Computers & structures, vol. 82, no. 9-10: Pergamon, pp. 773–779, 2004.
Jahed, H., MR. Noban, and MA. Eshraghi, Finite Element ANSYS: University of Tehran Press. Tehran, Iran, 2004.

2003

Jahed, H., and N. Mohammad Reza, "Strain field and strain history of nonproportional loading", WIT transaction on engineering science, vol. 40: WIT, pp. 12, 2003.
Jahed, H., and G. Ghanbari, "Actual unloading behavior and its significance on residual stress in machined autofrettaged tubes", Journal of pressure vessel technology, vol. 125, no. 3: American Society of Mechanical Engineers Digital Collection, pp. 321–325, 2003.
Jahed, H., and J. Bidabadi, "An axisymmetric method of creep analysis for primary and secondary creep", International journal of pressure vessels and piping, vol. 80, no. 9: Elsevier, pp. 597–606, 2003.
Jahed-Motlagh, HR., MR. Noban, and MA. Eshraghi, "Ansys", Science and Industrial Iran University Publications, Tehran, Iran, 2003.
H, J., N. M, and E. A, ANSYS Finite Elements: University of Tehran Press, ISBN 964-03-9929-9, 2003.

2002

H, G. G. Jahed, "Actual Unloading Curve Measurements and its Significant in Residual Stress Predictions", Gun Tube Conference, Guns and Pressure Vessels: Design, Mechanics and Materials, 2002.
B, F., J. H, and M. A, "Farshi B, Jahed H, Mehrabian A*, 2002, "Optimum Design of Rotating Disc at High Temperatures", ISME 2002, vol. 4: Iranian Society of Mechanical Engineers, pp. 2048–2056, 2002.
H, J., "Mechanical Engineering Education in Iran: Present Situation", Journal of engineering education, vol. 14: Iran Science Academy, pp. 27–39, 2002.

2001

H., J. N. Jahed, "A Method for Creep Analysis of Rotating Discs", 6th Biaxial/Multiaxial fatigue and Fracture, Lisbon, Portuga, vol. 2, pp. 425–431, 2001.
Jahed, H., and R. Shirazi, "Loading and unloading behaviour of a thermoplastic disc", International journal of pressure vessels and piping, vol. 78, no. 9: Elsevier, pp. 637–645, 2001.

2000

H, S. S. Jahed, "Thermoplastic Analysis of Inhomogeneous Rotating Disk with Variable Thickness", Fatigue 2000, no. Fatigue & Durability Assessment of Mater, pp. 229–238, 2000.
H, R. M. Jahed, "Residual stress Field Prediction in Cold Worked Fastener Holes", International Journal of Engineering Sciences, vol. 11, no. 3, pp. 165–185, 2000.
Jahed, H., SB. Lambert, and RN. Dubey, "Variable material property method in the analysis of cold-worked fastener holes", The Journal of Strain Analysis for Engineering Design, vol. 35, no. 2: SAGE Publications Sage UK: London, England, pp. 137–142, 2000.

1998

Acharya, AR., VC. Agarwal, M. Ahammed, MAS. Akanda, VV. Anikovsky, H. Antes, W. Anwen, V. Balasubramanian, CC. Baniotopoulos, H. Ben Haim, et al., "Dubey, RN 633 Dutta, BK 1055", International Journal of Pressure Vessels and Piping, vol. 75, pp. 1111–1113, 1998.
Jahed, H., SB. Lambert, and RN. Dubey, "Total deformation theory for non-proportional loading", International journal of pressure vessels and piping, vol. 75, no. 8: Elsevier, pp. 633–642, 1998.

1997

Dubey, RN., H. Jahed, and A. Kumar, "A technique for solving nonlinear problems", Trends in Structural Mechanics: Springer, Dordrecht, pp. 15–20, 1997.
Jahed, H., R. Sethuraman, and RN. Dubey, "A variable material property approach for solving elastic-plastic problems", International journal of pressure vessels and piping, vol. 71, no. 3: Elsevier, pp. 285–291, 1997.
Jahed, H., and RN. Dubey, "An axisymmetric method of elastic-plastic analysis capable of predicting residual stress field", Journal of pressure vessel technology, vol. 119, no. 3: American Society of Mechanical Engineers Digital Collection, pp. 264–273, 1997.
Jahed, H., and R. Shirazi, "Thermoplastic analysis of rotating at elevated temperatures", Int. J. Pressure Vessels Piping, vol. 71, no. 3, pp. 285–91, 1997.

1996

Jahed, H., and D. RN, "A Consistent Inelastic Formulation Analogous to Elastic Problems with Variable Coefficients", ASME PVP, vol. 43, no. Deveopment Validation, and Application: ASME, 1996.
H, D. R. N. Jahed, "Residual Stresses Calculation in Autofrettage Using Variable Material Properties Method", ASME PVP, vol. 327, no. Residual Stress in Design, Fabrication: ASME, pp. 181–188, 1996.
H, S. R. Jahed, and S. A. Meguid RN, "Variable Material Properties Approach in Elastic-Plastic Solution of Thick-Walled Cylinders", Mechanics in Design, pp. 187–197, 1996.

1984

Casey, J., and H. Jahedmotlagh, "The strength-differential effect in plasticity", International journal of solids and structures, vol. 20, no. 4: Pergamon, pp. 377–393, 1984.

Publications search