Reference author: Xavier Beudaert

Franco, O., Beudaert, X., Ulacia, I., Erkorkmaz, K., & Munoa, J. (2025). Static stiffness analysis of an electronically preloaded rack and pinion feed drive system Procedia CIRP, 132, 68-73. https://doi.org/10.1016/j.procir.2025.01.012

Franco, O., Beudaert, X., Erkorkmaz, K., & Munoa, J. (2024). Feed Drive Control and Non-Linear Friction Interaction Effect on Machining Chatter Stability Prediction Journal of Manufacturing and Materials Processing, 8(5), 207. https://doi.org/10.3390/jmmp8050207

Franco, O., Beudaert, X., Erkorkmaz, K., Barrios, A., & Munoa, J. (2019). Machining chatter stability improvement by means of feed drive control parameters Presented at the 8th International Conference on Virtual Machining Process Technology (VMPT) conference. Vancouver, Canada.

Beudaert, X., Erkorkmaz, K., & Munoa, J. (2019). Portable damping system for chatter suppression on flexible workpieces CIRP Annals, 68, 423-426. https://doi.org/https://doi.org/10.1016/j.cirp.2019.04.010

Chen, C. Q. G., DiCola, K., Erkorkmaz, K., & Beudaert, X. (2018). Two-Stage Feedrate Optimization for Freeform Toolpath Contouring Presented at the 7th International Conference on Virtual Machining Process Technology (VMPT) conference. Hamilton, Canada.

Franco, O., Beudaert, X., Erkorkmaz, K., Barrios, A., Mancisidor, I., & Munoa, J. (2017). Control strategies for structural chatter suppression using a rack and pinion drive Presented at the 6th International Conference on Virtual Machining Process Technology (VMPT) conference. Montréal, Canada.

Erkorkmaz, K., Chen, C. Q. G., Zhao, M.-Y., Beudaert, X., & Gao, X.-S. (2017). Linear programming and windowing based feedrate optimization for spline toolpaths CIRP Annals, 66, 393-396. https://doi.org/https://doi.org/10.1016/j.cirp.2017.04.058

Munoa, J., Beudaert, X., Erkorkmaz, K., Iglesias, A., Barrios, A., & Zatarain, M. (2015). Active suppression of structural chatter vibrations using machine drives and accelerometers CIRP Annals, 64, 385-388. https://doi.org/https://doi.org/10.1016/j.cirp.2015.04.106

Franco, O., Beudaert, X., Erkorkmaz, K., & Munoa, J. (2022). Influence of guideway friction on the cutting point receptance in machine tools CIRP Annals, 71, 361-364. https://doi.org/10.1016/j.cirp.2022.04.045

Franco, O., Beudaert, X., Iglesias, A., Dombovari, Z., Erkorkmaz, K., & Munoa, J. (2022). Optimal cutting condition selection for high quality receptance measurements by sweep milling force excitation International Journal of Machine Tools and Manufacture, 176, 103873. https://doi.org/10.1016/j.ijmachtools.2022.103873