A. Emamian, S.F. Corbin, A. Khajepour, “The influence of combined laser parameters on in-situ formed TiC morphology during laser cladding;, Surface and Coatings Technology, Vol. 206, no. 1, pp. 124-131, October 2011.

V. Fallah, M. Alimardani, S.F. Corbin, A. Khajepour, “Temporal development of melt-pool morphology and clad geometry in laser powder deposition”, Computational Materials Science, vol. 50, no. 7, pp. 2124-2134, May 2011.

V. Fallah, M. Alimardani, S.F. Corbin, A. Khajepour, “Impact of localized surface preheating on the microstructure and crack formation in laser direct deposition of Stellite 1 on AISI 4340 Steel”, Applied Surface Science, vol. 257, no. 5, pp. 1716-1723, December 2010.

A. Emamian, S.F. Corbin, A. Khajepour, “Effect of laser cladding process parameters on clad quality and in-situ formed microstructure of Fe-TiC composite coating”,​ Surface and Coatings Technology, Vol. 205, no. 7, pp. 2007-2015, December 2010.

M. Zeinali, A. Khajepour, “Development of an adaptive fuzzy logic-based inverse dynamic model for laser cladding process”, Engineering Applications of Artificial Intelligence, vol. 23, no. 8, pp. 1408-1419, December 2010.

V. Fallah, S.F. Corbin, A. Khajepour, “Process optimization of Ti–Nb alloy coatings on a Ti–6Al–4V plate using a fiber laser and blended elemental powders”, Journal of Materials Processing Technology, vol. 210, no. 14, pp. 2081-2087, November 2010.

M. Alimardani, V. Fallah, A. Khajepour, E. Toyserkani, “The effect of localized dynamic surface preheating in laser cladding of Stellite 1”, Surface and Coatings Technology, vol. 204, no. 23, pp. 3911-3919, August 2010.

M. Zeinali, A. Khajepour, “Height control in laser cladding using adaptive sliding mode technique: theory and experiment”, ASME Journal of Manufacturing Science and Engineering, vol. 132, no. 4, pp. 041016:1-10, August 2010.

V. Fallah, S.F. Corbin, A. Khajepour, “Solidification behaviour and phase formation during pre-placed laser cladding of Ti45Nb on mild steel”, Surface and Coatings Technology, vol. 204, no. 15, pp. 2400-2409, April 2010.

M. Alimardani, E. Toyserkani, J.P. Huissoon, C.P. Paul, “On the delamination and crack formation in a thin wall fabricated using laser solid freeform fabrication process: An experiment”, Optics and Lasers in Engineering, vol. 47, no. 11, pp. 1160-1168, November 2009.

D. Gupta, C.P. Paul, B.K. Gandhi, S.R. Gupta, A.K. Nath, “Wear Behaviour of Laser Clad Surfaces of Cr3C2, WC and Mo on Austenitic AISI 304L Steel”,Journal of Laser Applications, vol. 20, no. 3, pp.140-145, August 2008.

C.P. Paul, A. Khajepour, “Automated laser fabrication of cemented carbide components”, Optics and Laser Technology, vol. 40, no. 5, pp. 735-741, July 2008.

A. Fathi, A. Khajepour, M. Durali, E. Toyserkani, “Geometry control of the deposited layer in a non-planar laser cladding process using a variable structure controller”, ASME Journal of Manufacturing Science and Engineering, vol. 130, no. 3, pp. 031003:1-11, June 2008.

M. Alimardani, E. Toyserkani, “Prediction of laser solid freeform fabrication using neuro-fuzzy method”, Applied Soft Computing, vol. 8, no. 1, pp. 316-323, January 2008.

A. Fathi, A. Khajepour, E. Toyserkani, M. Durali, “Clad height control in laser solid freeform fabrication using a feedforward PID controller”, The International Journal of Advanced Manufacturing Technology, vol. 35, no. 3-4, pp. 280-292, December 2007.

M. Alimardani, E. Toyserkani, J.P. Huissoon, “A 3D dynamic numerical approach for temperature and thermal stress distributions in multilayer laser solid freeform fabrication process”, Optics and Lasers in Engineering, vol. 45, no. 12, pp. 1115-1130, December 2007.

M. Iravani, E. Toyserkani, “An image-based feature tracking algorithm for real-time measurement of clad height”, Journal of Machine Vision and Applications, vol. 18, no. 6, pp. 343-354, November 2007.

H. Alemohammad, E. Toyserkani, and C.P. Paul, “Fabrication of smart cutting tools with embedded optical fiber sensors using combined laser solid freeform fabrication and moulding techniques”, Optics and Lasers in Engineering, vol. 45, no. 10, pp. 1010-1017, October 2007.

C.P. Paul, H. Alemohammad, E. Toyserkani, A. Khajepour, S.F. Corbin, “Cladding of WC-12 Co on low carbon steel using a pulsed Nd: YAG laser”, Materials Science and Engineering A, vol. 464, no. 1-2, pp. 170-176, August 2007.

C.P. Paul, P. Ganesh, S.K. Mishra, P. Bhargava, J. Negi, A.K. Nath, “Investigating laser rapid manufacturing for Inconel-625 components”, Optics and Laser Technology, Vol. 39, pp. 800–805, June 2007.

H. Alemohammad, S. Esmaeili, E. Toyserkani, “Deposition of Co-Ti alloy on mild steel substrate using laser cladding;, Materials Science and Engineering A, vol. 456, no. 1-2, pp. 156-161, May 2007.

M. Durali, A. Fathi, A. Khajepour, E. Toyserkani, “Adaptive modeling of laser powder deposition process for control and monitoring application”, Journal of Vibration and Control, vol. 13, no. 5, pp. 461-473, May 2007.

M. Alimardani, E. Toyserkani, J.P. Huissoon, “A 3D numerical approach for geometrical prediction of multilayer laser solid freeform fabrication process”,Journal of Laser Applications, vol. 19, no. 1, pp. 14-25, February 2007.

E. Toyserkani, A. Khajepour, “A mechatronics approach to laser powder deposition process”, Journal of Mechatronics, vol. 16, no. 10, pp. 631-641, December 2006.

C.P. Paul, A. Jain, P. Ganesh , J. Negi, A.K. Nath, “Laser rapid manufacturing of Colmonoy components”, Optics and Lasers in Engineering, vol. 44, no.10, pp.1096-1109, October 2006.

A. Fathi, E. Toyserkani, A. Khajepour, M. Durali, “Prediction of melt pool depth and dilution in laser powder deposition”, Journal of Physics D: Applied Physics, vol. 39, no. 12, pp. 2613-2623, June 2006.

E. Toyserkani, A. Khajepour, S.F. Corbin, “3-D finite element modeling of laser cladding by powder deposition: Effects of laser pulse shaping on the process”,Optics and Lasers in Engineering, vol. 41, no. 6, pp. 849-867, June 2004.

E. Toyserkani, A. Khajepour, S.F. Corbin, “3-D finite element modeling of laser cladding by powder deposition: Effects of powder feedrate and travel speed on the process”, Journal of Laser Applications, vol. 15, no. 3, pp. 153-161, 2003.

S.F. Corbin, E. Toyserkani, A. Khajepour, “Experimental analysis of cladding of Fe-Al coating on the mild steel using automated laser assisted powder deposition”, Materials Science and Engineering: A., vol. 354, no. 1-2, pp. 48-57, August 2003.

R. Kaul, P. Ganesh, C.P. Paul, S.K. Albert, A. Jaiswal, N.P. Lalla, A. Gupta, A.K. Nath, “Laser cladding of Austenitic Stainless steel with Nickel base hardfacing alloy”, Surface Engineering, vol.19, no.3, pp. 269-273, 2003.

J. Khare, R. Sreedhar, C.P. Paul, T. Reghu , A.K. Nat, “Operational characteristics and power scaling of a transverse flow transversely excited CW CO2 laser”, Pramana, vol.60, no.1, pp.99-107, January 2003.

C.P. Paul, J. Negi, A.K. Nath, “Parametric dependence and fabrication time in laser rapid manufacturing”, Metals Material & Processes, vol.14, no.3, pp.163-172, 2002.

E. Toyserkani, A. Khajepour, S.F. Corbin, “Application of experimental-based modeling to laser cladding”, Journal of Laser Applications, vol. 14, no. 3, pp. 165-173, 2002.