- Heidarzadeh, Akbar; Mironov, S; Kaibyshev, Rustam; Çam, Gürel; Simar, Aude; Gerlich, A; Khodabakhshi, Farzad; Mostafaei, Amir; Field, David P; Robson, Joseph D; Friction stir welding/processing of metals and alloys: a comprehensive review on microstructural evolution, Progress in Materials Science, 117, 100752, 2021
- Huda, Nazmul; Whitney, Mark A; Razmpoosh, Mohammad H; Gerlich, Adrian P; Wen, John Z; Corbin, Stephen F; How phase (α and γ) and porosity affect specific heat capacity and thermal conductivity of thermal storage alumina, Journal of the American Ceramic Society, 104, 3, 1436-1447, 2021
- Rafieazad, Mehran; Mohammadi, Mohsen; Gerlich, Adrian; Nasiri, Ali; Enhancing the corrosion properties of additively manufactured AlSi10Mg using friction stir processing, Corrosion Science, 178, 109073, 2021
- Farshidianfar, Mohammad H; Khodabakhshi, Farzad; Khajepour, Amir; Gerlich, Adrian P; Closed-loop control of microstructure and mechanical properties in additive manufacturing by directed energy deposition, Materials Science and Engineering: A, 803, 140483, 2021
- Mehrian, SS Mirian; Rahsepar, M; Khodabakhshi, F; Gerlich, AP; Effects of friction stir processing on the microstructure, mechanical and corrosion behaviors of an aluminum-magnesium alloy, Surface and Coatings Technology, 405, 126647, 2021
- Huda, Nazmul; Midawi, Abdelbaset; Gianetto, James A; Gerlich, Adrian P; Continuous cooling transformation behaviour and toughness of heat-affected zones in an X80 line pipe steel, Journal of Materials Research and Technology, 12, 613-628, 2021
- Ribeiro, RA; Assunção, PDC; Braga, EM; Gerlich, AP; Welding thermal efficiency in cold wire gas metal arc welding, Welding in the World, 65, 6, 1079-1095, 2021
- Huang, GQ; Wu, J; Hou, WT; Shah, LH; Midawi, ARH; Gerlich, AP; Shen, YF; Meng, FQ; Microstructural evolution and mechanical behavior of powder metallurgy based SiC/Al–Mg-Sc-Zr nanocomposite subjected to multi-pass friction stir processing, Materials Science and Engineering: A, 806, 140831, 2021
- Khodabakhshi, F; Gerlich, AP; Verma, D; Nosko, M; Haghshenas, M; Small-scale plasticity of ultra-fine grained alloy and nanostructured nanocomposite: Ambient and elevated-temperature nanoindentation, Materials Science and Engineering: A, 807, 140873, 2021
- Khodabakhshi, Farzad; Gerlich, Adrian P; Verma, D; Nosko, Martin; Haghshenas, M; Depth-sensing thermal stability of accumulative fold-forged nanostructured materials, Materials & Design, 202, 109554, 2021
- Hou, Wentao; Shen, Zhikang; Huda, Nazmul; Oheil, Mazin; Shen, Yifu; Jahed, Hamid; Gerlich, Adrian P; Enhancing metallurgical and mechanical properties of friction stir butt welded joints of Al–Cu via cold sprayed Ni interlayer, Materials Science and Engineering: A, 809, 140992, 2021
- Shen, Zhikang; Liu, Xinyu; Li, Dongxiao; Ding, Yuquan; Hou, Wentao; Chen, Haiyan; Li, Wenya; Gerlich, Adrian P; Interfacial Bonding and Mechanical Properties of Al/Mg Dissimilar Refill Friction Stir Spot Welds Using a Grooved Tool, Crystals, 11, 4, 429, 2021
- Gerlich, Adrian P; Welding and Joining of Light Alloys, Encyclopedia of Materials: Metals and Alloys, 234-244, 2021
- Farshidianfar, Mohammad Hossein; Khodabakhshi, Farzad; Khajepour, Amir; Gerlich, AP; Closed-loop deposition of martensitic stainless steel during laser additive manufacturing to control microstructure and mechanical properties, Optics and Lasers in Engineering, 145, 106680, 2021
- Khodabakhshi, Farzad; Mohammadi, Mohsen; Gerlich, Adrian P; Stability of ultra-fine and nano-grains after severe plastic deformation: a critical review, Journal of Materials Science, 56, 28, 15513-15537, 2021
- Ribeiro, RA; Assunção, PDC; Gerlich, AP; Suppression of arc wandering during cold wire-assisted pulsed gas metal arc welding, Welding in the World, 65, 9, 1749-1758, 2021
- Huang, Guoqiang; Wu, Jie; Hou, Wentao; Shah, Luqman Hakim Ahmad; Midawi, Abdelbaset RH; Cao, Fujun; Gerlich, Adrian; Shen, Yifu; Meng, Fanqiang; A novel two-step method to prepare fine-grained SiC/Al-Mg-Sc-Zr nanocomposite: Processing, microstructure and mechanical properties, Materials Science and Engineering: A, 823, 141764, 2021
- Ribeiro, RA; Assuncao, PDC; Dos Santos, EBF; Braga, EM; Gerlich, AP; Globular-to-Spray Transition in Cold Wire Gas Metal Arc Welding, Welding Journal, 100, 4, 121S-131S, 2021
- Shen, Zhikang; Ding, Yuquan; Guo, Wei; Hou, Wentao; Liu, Xiaochao; Chen, Haiyan; Liu, Fenjun; Li, Wenya; Gerlich, Adrian; Refill friction stir spot welding Al alloy to copper via pure metallurgical joining mechanism, Chinese Journal of Mechanical Engineering, 34, 1, 08-Jan, 2021
- Moeinfar, Kh; Khodabakhshi, F; Kashani-bozorg, SF; Mohammadi, M; Gerlich, AP; A review on metallurgical aspects of laser additive manufacturing (LAM): Stainless steels, nickel superalloys, and titanium alloys, Journal of Materials Research and Technology, 2021
- D.C. Ramachandran, J. Moon, C.-H. Lee,S.-D. Kim, E. Biro, Y.-D. Park, Role of Bainitic Microstructures with M-A Constituent on the Toughness of an HSLA Steel for Seismic Resistant Structural Application, Material Science and Engineering A, 801, 2021, 140390.
- C. DiGiovanni, E. Biro, A Review of Current LME Test Methods and Suggestions for Developing a Standardized Test Procedure, Welding in the World, 65, 2021, 865-884.
- M. Dieckmann, M. Zinke, S. Jüttner, E. Biro, Determination of LME sensitivity of zinc coated steels based on the programmable deformation cracking test, Welding in the World, 65, 2021, 2295-2308.
- M. Shojaee, A.R.H. Midawi, B. Barber, H.Ghassemi-Armaki, M. Worswick, E. Biro, Mechanical properties and failure behavior of resistance spot welded third-generation advanced high strength steels, Journal of Manufacturing Processes, 65, 2021, 364-372.
- A.R.H. Midawi, S. Kistampally, E. Biro, Effect of Zinc Coating and Wire Composition on the AHSS Thin Sheet Gas Metal Arc Welds, Welding Journal, 100, 2021, 396s-409s.
- B. Figueredo, D.C. Ramachandran, A. Macwan, E. Biro, Failure Behavior and Mechanical Properties in the Resistance Spot Welding of Quenched & Partitioned (Q&P) Steels, Welding in the World, 65, 2021, 2359-2369.
- O. Sherepenko, A. Mohamadizadeh, A. Zvorykina, M. Worswick, E. Biro, S. Jüttner, Determination of Resistance Spot Weld Failure Path in Ultra-High-Strength Press Hardened Steel by Control of Fusion Boundary Transient Softening, Journal of Materials Science, 56, 2021, 14287-14297.
- A. Mohamadizadeh, E. Biro, M. Worswick, Novel double-half spot weld testing technique for damage progress and failure analysis using digital image correlation techniques, Experimental Mechanics, 61, 2021, 1405-1418.
- I. Aderibigbe, A.P.I. Popoola, E.R. Sadiku, E. Biro, Effects of Heat Input on Microstructure and Mechanical Properties of Dissimilar Laser Welded Dual Phase and Boron Steel Joints, SAE International Journal of Materials and Manufacturing, 15, 2021, 05-15-01-0005.
- X. Zhou, W. Guo, P. Peng*. Laser Erasing and Rewriting of Flexible Copper Circuits. Nano-Micro Letters 2021, 13 (1), 1-12
- X. Wang, W. Guo, H. Zhang, P. Peng. Synthesis of Free-standing Silver Foam via Oriented and Additive Nanojoining. ACS Applied Materials & Interfaces 2021, 13 (32), 38637-38646.
- Y. Yao, W. Guo, X. Zhou, P. Peng. Thermal Properties of Laser Fabricated Copper‐Carbon Composite Films on Polyimide Substrate. Advanced Engineering Materials 2021, 23, 2100623
- J. Liao, W. Guo, P. Peng. Direct laser writing of copper-graphene composites for flexible electronics. Optics and Lasers in Engineering 2021, 142, 106605
- X. Zhou, W. Guo, Y. Yao, R. Peng, P. Peng. Flexible Non-Enzymatic Glucose Sensing with One-Step Laser Fabricated Cu2O/Cu Porous Structure. Advanced Engineering Materials 2021, 2100192.
- J. Xue, P. Peng, W. Guo, M. Xia, C. Tan, Z. Wan, H. Zhang, Y. Li. HAZ characterization and mechanical properties of QP980-DP980 laser welded joints. Chinese Journal of Mechanical Engineering 2021, 34 (1), 1-14
- M.H. Razmpoosh, C DiGiovanni, Y. Zhou, E. Biro, Pathway to Understand Liquid Metal Embrittlement (LME) in Fe-Zn Couple: From Fundamentals toward Application, Prog. Mater. Sci., 121, 2021, 100798
- D. Shen, M. Xiao, X. Zhao, Y. Xiao, W.W Duley, Y. Zhou, Multifunctional Self-Powered Electronics Based on a Reusable Low-Cost Polypropylene Fabric Triboelectric Nanogenerator, ACS Appl. Mater. Interfaces, 13, 2021, 34266-34273
- M.S. Khan, Y.-H. Cho, M. Alfano, F. Goodwin, E. Biro, Y. Zhou, A systematic study on the effect of coating type and surface preparation on the wettability of Si-Bronze brazing filler material on GI and GA-coated DP600, Surf. Coat. Technol., 425, 2021, 127735
- T. Gao, K. Pan, B. Sun, L. Wei, Y. Zhou, Y.A. Wu, Adjustable Leaky-Integrate-and-fire neurons based on memristor-coupled capacitors, Mater. Today Adv., 12, 2021, 100192
- S. Zheng, W.W. Duley, P. Peng, Y. Zhou, Formation of metal-semiconductor nanowire heterojunctions by nanosecond laser irradiation, AIP Advances, 11, 2021, 095207
- X. Zhao, J. Feng, M. Xiao, D. Shen, C. Tan, X. Song, J. Feng, W.W. Duley, Y. Zhou, A Simple High Power, Fast Response Streaming Potential/Current-Based Electric Nanogenerator Using a Layer of Al2O3 Nanoparticles, ACS Appl. Mater. Interfaces, 13, 2021, 27169-27178
- C. DiGiovanni, A. Ghatei Kalashami, E. Biro, Y. Zhou, Liquid metal embrittlement transport mechanism in the Fe/Zn system: Stress-assisted diffusion, Materialia, 18, 2021, 101153
- B. Sun, T. Guo, G. Zhou, S. Ranjan, Y. Jiao, L. Wei, Y. Zhou, Y. Wu, Synaptic devices based neuromorphic computing applications in artificial intelligence, Mater. Today Phys., 18, 2021, 100393
- A. Shamsolhodaei, B. Panton, A. Michael, P. Changizian, Y. Zhou, Laser Alloying as an Effective Way to Fabricate NiTiPt Shape Memory Alloys, Metall. Mater. Trans. A, 52, 2021, 4368-4378
- M.S. Khan, S.I. Shahabad, M. Yavuz, W.W. Duley, E. Biro, Y. Zhou, Numerical modelling and experimental validation of the effect of laser beam defocusing on process optimization during fiber laser welding of automotive press-hardened steel, J. Manuf. Process., 67, 2021, 535-544
- A. Fattahi, I. Jaciw-Zurakowsky, N. Srikanthan, L. Bragg, R. Liang, Y. Zhou, M. Servos, M. Arlos, Effect of background water matrices on pharmaceutical and personal care products removal by UV-LED/TiO2, Catalysts, 11, 2021, 576
- P.D. Enrique, C. DiGiovanni, N. Mao, R. Liang, S. Peterkin, Y. Zhou, Resistance is not futile: The use of projections for resistance joining of metal additively and conventionally manufactured parts, J. Manuf. Process., 66, 2021, 424-434
- B. Sun, S. Ranjan, G. Zhou, T. Guo, D. Cheng, L. Wei, Y. Zhou, Y. Wu, A True Random Number Generator Based on Ionic Liquid Modulated Memristors, ACS Appl. Electon. Mater. 3, 2021, 2380-2388
- A. Shamsolhodaei, J.P. Oliveira, B. Panton, B. Ballesteros, N. Schell, Y. Zhou, Superelasticity preservation in dissimilar joint of NiTi shape memory alloy to biomedical PtIr, Materialia, 16, 2021, 101090
- A. Keshavarzkermani, R. Esmaeilizadeh, P.D. Enrique, H. Asgari, Y. Zhou, A. Bonakdar, E. Toyserkani, Static recrystallization impact on grain structure and mechanical properties of heat-treated Hastelloy X produced via laser powder-bed fusion, Mater. Charact., 173, 2021, 110969
- C. DiGiovanni, L. He, C. Hawkins, Y. Zhou, E. Biro, Significance of cutting plane in liquid metal embrittlement severity quantification, SN Appl. Sci., 3, 2021, 620
- P.D. Enrique, A. Keshavarzkermani, Y. Zhou, Effect of Microsegregation on High‐Temperature Microstructure Evolution in Rapid Solidification Processed Nb‐Rich Ni Superalloys, Adv. Eng. Mater., 2021, 2001396
- A. Ghatei Kalashami, E. Ghassemali, C. DiGiovanni, F. Goodwin, Y. Zhou, Occurrence of liquid-metal-embrittlement in a fully ferritic microstructure, Materialia, 15, 2021, 101036
- B. Sun, T. Guo, G. Zhou, J. Wu, Y. Chen, Y. Zhou, Y.A. Wu, A Battery-Like Self-Selecting Biomemristor from Earth-Abundant Natural Biomaterials, ACS Appl. Bio Mater., 4(2), 2021, 1976-1985
- M.H. Razmpoosh, M.S. Khan, A. Ghatei Kalashami, A. Macwan, E. Biro, Y. Zhou, Effects of Laser Beam Defocusing on High-Strain-Rate Tensile Behavior of Press-Hardened Zn-Coated 22MnB5 Steel Welds, Opt. Laser Technol., 141, 2021, 107116
- M.S. Khan, A. Macwan, E. Biro, Y. Zhou α-ferrite Suppression during Laser Welding of Al-Si-Coated 22MnB5 Press-Hardened Steel, Weld. J., 100(6), 2021, 213-s to 220-s
- Q. Sun, J. Chen, X. Wang, F. Gu, C. Tan, A. Shamsolhodaei, L. Sun, Y. Zhou, Study on weld formation and segregation mechanism for dissimilar pulse laser welding of NiTi and Cu wires, Opt. Laser Technol., 140, 2021, 107071
- J. Feng, Y. Tian, S. Wang, M. Xiao, Z. Hui, C. Hang, W.W. Duley, Y. Zhou, Femtosecond laser irradiation induced heterojunctions between carbon nanofibers and silver nanowires for a flexible strain sensor, J. Mater. Sci. Technol., 84, 2021, 139-46
- M.S. Khan, M.H. Razmpoosh, A. Macwan, E. Biro, Y. Zhou, Optimizing weld morphology and mechanical properties of laser welded Al-Si coated 22MnB5 by surface application of colloidal graphite, J. Mater. Process. Tech., 293 (2021) 117093
- J.P. Oliveira, J. Shen, J.D. Escobar, C.A.F. Salvador, N. Schell, Y. Zhou, O. Benafan, Laser welding of H-phase strengthened Ni-rich NiTi-20Zr high-temperature shape memory alloy, Mater. Des., 202, 2021, 109533
- B. Sun, S. Ranjance, G. Zhou, T. Guo, Y. Xi, L. Wei, Y. Zhou, Y.A. Wu, Multistate resistive switching behaviors for neuromorphic computing in memristor, Mater. Today Adv., 9, 2021, 100125
- A. Shamsolhodaei, M.H. Razmpoosh, C. Maletta, P. Magaro, Y. Zhou, A comprehensive insight into the superelasticity measurement of laser welded NiTi shape memory alloys, Mater. Lett., 287, 2021, 129310
- A. Fattahi, L.M. Bragg, R. Liang, Y. Zhou, M.R. Servos, Degradation of natural organic matter using Ag-P25 photocatalyst under continuous and periodic irradiation of 405 and 365 nm UV-LEDs, J. Environ. Chem. Eng., 9(1), 2021, 104844
- C. DiGiovanni, A. Ghatei Kalashami, F. Goodwin, E. Biro, Y. Zhou, Occurrence of Sub-Critical Heat Affected Zone Liquid Metal Embrittlement in Joining of Advanced High Strength Steel, J. Mater. Process. Tech., 288, 2021, 116917
- A. Fattahi, M.J. Arlos, L.M. Bragg, S. Kowalczyk, R. Liang, O.M. Schneider, Y. Zhou, M.R. Servos, Photodecomposition of pharmaceuticals and personal care products using P25 modified with Ag nanoparticles in the presence of natural organic matter, Sci. Total Environ., 752, 2021, 142000
- N. Nandihalli, R. Liang, S. Gorsd, T. Morie, Y. Zhou, H. Kleine, Transport properties of a molybdenum antimonide-telluride with dispersed NiSb nanoparticles, Mater. Chem. Phys., 260, 2021, 124061
- M.S. Khan, P. Enrique, G. Song, M.I.S.T. Faria, Y. Zhou, Laser-assisted wire cladding using a retrofitted laser welding system, Surf. Eng., 37(5), 2021, 634–641
- S. Zhang, C. DiGiovanni, L. He, Y. Zhou, Weld hardness ratio and liquid metal embrittlement crack’s detrimental effect on resistant spot weld strength, Sci. Technol. Weld. Join., 26(1), 2021, 58-67
- M.H. Razmpoosh, B. Langelier, E. Marzbanrad, H.S. Zurob, Y. Zhou, E. Biro, Atomic scale investigation of liquid metal embrittlement crack path: revealing mechanism and role of grain boundary chemistry, Acta Materialia, 174, 2021, 116519
- AbdelAziz, M., & Mayer, M. (2021, June). In-situ Determination of Specimen Temperature during Electromigration Testing of Solder Joint. In 2021 IEEE 71st Electronic Components and Technology Conference (ECTC) (pp. 1767-1772). IEEE.
- AbdelAziz, M., Xu, D. E., Wang, G., & Mayer, M. (2021). Electromigration in solder joints: A cross-sectioned model system for real-time observation. Microelectronics Reliability, 119, 114068.