- Khodabakhshi, F; Ekrt, O; Abdi, M; Gerlich, AP; Mottaghi, M; Ebrahimi, R; Nosko, M; Wilde, G; Hydrogen storage behavior of Mg/Ni layered nanostructured composite materials produced by accumulative fold-forging, International Journal of Hydrogen Energy, 47, 2, 1048-1062, 2022
- Huda, Nazmul; Hygreeva, Namburi; Gaudet, Michel; McLellan, Anne; Gerlich, Adrian P; Interlayer Characterization and Properties Evaluation of Zirconium and 304-Stainless Steel Rotary Friction Weld Joints, Metallurgical and Materials Transactions A, 53, 5, 1590-1596, 2022
- Huang, Guoqiang; Wu, Jie; Yuan, Rui; Yang, Jinxue; Cao, Fujun; Midawi, Abdelbaset RH; Guan, Wei; Hou, Wentao; Lu, Chenyang; Gerlich, Adrian; Elucidating microstructural evolution and its effect on the mechanical properties of FSWed alumina-forming austenitic steel for power plant applications, Materials & Design, 215, 110484, 2022
- Yang, Hanwen; Chen, James; Huda, Nazmul; Gerlich, Adrian P; Effect of beam wobbling on microstructure and hardness during laser welding of X70 pipeline steel, Science and Technology of Welding and Joining, 13-Jan, 2022
- Ramachandiran, Nivas; Asgari, Hamed; Dibia, Francis; Eybel, Roger; Gerlich, Adrian; Toyserkani, Ehsan; Effect of non-lamellar α precipitate morphology on the mechanical properties of Ti5553 parts made by laser powder-bed fusion at high laser scan speeds, Materials Science and Engineering: A, 841, 143039, 2022
- Gaudet, Michel; McLellan, Anne; Gerlich, Adrian; Williams, Bruce; Joining of Zirconium Alloys to Nickel Bearing Alloys for In-Core Components, Journal of Nuclear Engineering and Radiation Science, 2022
- Cao, Fujun; Huang, Guoqiang; Hou, Wentao; Ni, Ruiyang; Sun, Tao; Hu, Jinpeng; Shen, Yifu; Gerlich, Adrian P; Simultaneously enhanced strength-ductility synergy and corrosion resistance in submerged friction stir welded super duplex stainless steel joint via creating ultrafine microstructure, Journal of Materials Processing Technology, 117660, 2022
- Hou, Wentao; Ding, Yuquan; Huang, Guoqiang; Huda, Nazmul; Shah, Luqman Hakim Ahmad; Piao, Zhongyu; Shen, Yifu; Shen, Zhikang; Gerlich, Adrian; The role of pin eccentricity in friction stir welding of Al-Mg-Si alloy sheets: Microstructural evolution and mechanical properties, The International Journal of Advanced Manufacturing Technology, 121, 11, 7661-7675, 2022
- Shah, Luqman Hakim Ahmad; Hou, Wentao; Razmpoosh, Mohammad Hadi; Walbridge, Scott; Gerlich, Adrian; Strain rate and microtexture analysis of rapid-quenched AA6061 friction stir welds produced with tool eccentricity, Journal of Materials Research and Technology, 21, 1434-1441, 2022
- Fleury, A; Ranjan, R; Shah, LH; St-Georges, L; Rahem, A; Walbridge, S; Gerlich, A; Fatigue performance of thick 6061-T6 aluminum friction stir welded joints with misalignment or channel defects, Welding in the World, 14-Jan, 2022
- Ramachandiran, Nivas; Asgari, Hamed; Dibi, Francis; Eybel, Roger; Muhamma, Waqas; Gerlich, Adrian; Toyserkani, Ehsan; Effects of post heat treatment on microstructure and mechanical properties of Ti5553 parts made by laser powder bed fusion, Journal of Alloys and Compounds, 168616, 2022
- D.C. Ramachandran, B. Figueredo, O. Sherepenko, W. Jin, Y.-D. Park, E. Biro, A Study on Improving the Mechanical Performance by Controlling the Halo Ring in the Q&P 980 Steel Resistance Spot Welds, Journal of Manufacturing Processes, 75, 2022, 320-330.
- A. Mohamadizadeh, E. Biro, M. Worswick, Failure characterization and meso-scale damage modeling of spot welds in hot stamped automotive steels using a hardness-mapping approach, Engineering Fracture Mechanics, 268, 2022, 108506.
- M. Shojaee, C. Tolton, A.R.H. Midawi, C. Butcher, H. Ghassemi-Armaki, M. Worswick, E. Biro, Influence of loading orientation on failure path and properties of resistance spot welds in third generation advanced high strength steels, International Journal of Mechanical Sciences, 224, 2022, 107327.
- O.T. Betiku, M. Shojaee, O. Sherepenko, A. Midawi, A. Chertov, H. Ghassemi-Armaki, R. Maev, and E. Biro, Optimizing Post Weld Performance of Press-Hardened Steel by Controlling Fusion Zone Porosity, Welding in the World, 66, 2022, 1733-1746.
- I.A. Aderibigbe, A.P.I. Popoola, E.R. Sadiku, and E. Biro, Low-temperature deformation mechanism and strain- hardening behaviour of laser welded dual-phase steels, Metals, 12, 2022, 1317.
- D.C. Ramachandran, A.R.H. Midawi, M. Shojaee, O. Sherepenko, H. Ghassemi-Armaki, E. Biro, A Comprehensive Evaluation of Tempering Kinetics on 3rd Generation Advanced High Strength Steels, Materialia, 26, 2022, 101644.
- A.R.H. Midawi, M. Shojaee, A. Mohamadizadeh, C. Bourque, H. Ghassemi Aramki, M. Worswick, C. Butcher, E. Biro, A Novel Technique to Measure the Local Mechanical Properties of Third Generation Advanced High Strength Steel Resistance Spot Welds, Forces in Mechanics, 9, 2022, 100150.
- I. Aderibigbe, A.P.I. Popoola, E.R. Sadiku, E. Biro, Influence of Low Temperatures on Mechanical Behaviour of Laser Welded Dual Phase Steels, Journal of Laser Applications, 31, 2022, 22011.
- D.C. Ramachandran, B. Figueredo, O. Sherepenko, W. Jin, Y.-D. Park, E. Biro, A Study on Improving the Mechanical Performance by Controlling the Halo Ring in the Q&P 980 Steel Resistance Spot Welds, Journal of Manufacturing Processes, 75, 2022, 320-330.
- A. Mohamadizadeh, E. Biro, M. Worswick, Failure characterization and meso-scale damage modeling of spot welds in hot stamped automotive steels using a hardness-mapping approach, Engineering Fracture Mechanics, 268, 2022, 108506.
- M. Shojaee, C. Tolton, A.R.H. Midawi, C. Butcher, H. Ghassemi-Armaki, M. Worswick, E. Biro, Influence of loading orientation on failure path and properties of resistance spot welds in third generation advanced high strength steels, International Journal of Mechanical Sciences, 224, 2022, 107327.
- Y. Wu, G. Zou, S. Wang, W. Guo, H. Zhang, P. Peng, B. Feng, L. Liu. Rapid and low temperature sintering bonding using Cu nanoparticle film for power electronic packaging. Applied Surface Science 2022, 603, 154422.
- Z. Wan, W. Dai, W. Guo, Q. Jia, H. Zhang, J. Xue, L. Lin, P. Peng. Improved corrosion resistance of Ni-base Alloy 600 welded joint by laser shock peening. Journal of Manufacturing Processes 2022, 80, 718-728.
- W. Guo, H. Wang, G. He, P. Peng, D. He, G. Han, J. Yan. Comparison of mechanical and corrosion properties of 7050 aluminum alloy after different laser shock peening. Optics & Laser Technology 2022, 151, 108061.
- H. Zhang, Z. Cai, J. Chi, R. Sun, Z. Che, L. Lin, P. Peng, H. Zhang, W. Guo. Gradient microstructure evolution in laser shock peened Ti6Al4V titanium alloy. Surface and Coatings Technology 2022, 437, 128378.
- Y. Yao, W. Guo, Z. Hui, C. Jin, P. Peng. Laser Fabricated Cu2O‐CuO/Ag Nanocomposite Films for SERS Application. ChemistrySelect 2022, 7 (6), e202104357.
- Y.H. Cho, M.S. Khan, A.R.H. Midawi, S. Zhang, F.E. Goodwin, Y. Zhou, Effect of gap clearance on the mechanical properties of weld-brazed lap joints, Manuf. Lett., 5, 2023, 20-23
- A. Ghatei-Kalashami, M.S. Khan, F. Goodwin, Y. Zhou, Investigating zinc-assisted liquid metal embrittlement in ferritic and austenitic steels: Correlation between crack susceptibility and failure mechanism, Mater. Charact., 195, 2023, 112502
- M.S. Khan, Y.H. Cho, F. Goowin, E. Biro, Y. Zhou, The Effect of Zinc Coating Type on the Morphology, Joint Geometry, and Mechanical Properties of Weld-Brazed Thin-Gauge Automotive Steel, Metall. Mater. Trans. A, 54, 2023, 179-95
- A. Ghatei-Kalashami, M.S. Khan, M. Lee, Y Zhou, High-temperature phase evolution of the ZnAlMg coating and its effect on mitigating liquid-metal-embrittlement cracking, Acta Materialia, 229, 2022, 117836
- N. Mao, P.D. Enrique, A. I.H. Chen, Y. Zhou, P. Peng, Dynamic response and failure mechanisms of a laser-fabricated flexible thin film strain gauge, Sens. Actuator A Phys., 342, 2022, 113655
- M.S. Khan, A. Ghatei-Kalashami, X. Wang, E. Biro, Y. Zhou, Refining the hierarchical structure of lath martensitic steel by in situ alloying with nickel: morphology, crystallography, and mechanical properties, J. Mater. Sci., 57, 2022, 20867-94
- T.A. Rodrigues, F.W. Cipriano Farias, K. Zhang, A. Shamsolhodaei, J. Shen, Y. Zhou, N. Schell, J. Capek, E. Polatidis, T. G. Santos, J.P. Oliveira, Wire and arc additive manufacturing of 316L stainless steel/Inconel 625 functionally graded material: development and characterization, J. Mater. Res. Technol., 21, 2022, 237-251
- M.R. Snowdon, S. Rathod, A. Fattahi, A. Khan, L.M. Bragg, R. Liang, Y Zhou, M. R. Servos, Water Purification and Electrochemical Oxidation: Meeting Different Targets with BDD and MMO Anodes, Environments, 9(11), 2022, 135
- Z. Yang, K. Pan, Y. Zhou, L. Wei Scalable 2T2R Logic Computation Structure: Design From Digital Logic Circuits to 3-D Stacked Memory Arrays, IEEE Journal on Exploratory Solid-State Computational Devices and Circuits, 8(2), 84-92
- J. Zhou, N. Mei, Z. Leonenko, Y. Zhou, M. Mayer, Direct glass-to-glass bonding obtained via simplified ammonia-based low-temperature procedure resists high shear stress and powerful CWfiber laser irradiation, RSC Adv., 12, 2022, 31016-23
- C. DiGiovanni, M. Shojaee, E. Biro, Y. Zhou, Effect of external loading on liquid metal embrittlement severity during resistance spot welding, Manuf. Lett., 33, 2022, 11-14
- S. Zheng, X. Zhao, W.W. Duley, Y. Zhou, P. Peng, Laser engineering of ITO/ZnO/ITO structures for photodetector applications, J. Laser Appl., 34, 2022, 032006
- Y.H. Cho, M.S. Khan, F.E. Goodwin, Y. Zhou, Correction to: Effect of torch angle and position on bead geometry and joint strength during arc brazing of thin‑gauge dual‑phase steel, Int. J. Adv. Manuf. Technol., 121, 2022, 543-557
- Y. Li, Y. Zhang, Y. Zhou, H. Yu, Z. Tan, Electrospun-nanofibrous Redox-active separator for enhancing the capacity of Lithium-ion batteries, Chem. Eng. Sci., 260, 2022, 1178732022
- A. Ghatei-Kalashami, E. Ghassemali, C. DiGiovanni, F. Goodwin, Y. Zhou, Liquid metal embrittlement cracking behavior in iron-zinc (Fe/Zn) couple: Comparison of ferritic and austenitic microstructures, Mater. Lett., 324, 2022, 132780
- M. Snowdon, R. Liang, J.C. Van Leeuwen, O. Schneider, A. Khan, L.C.M. Li Chun Fong, Y. Zhou, M. R Servos, Pharmaceutical Micropollutant Treatment with UV–LED/TiO2 Photocatalysis under Various Lighting and Matrix Conditions, Photochem, 2(3), 2022, 503-514
- K. Bandyopadhyay, S. Basak, S.K. Panda, P. Saha, Y. Zhou, Application of non-associated flow rule for prediction of nonuniform material flow during deep drawing of tailor welded blanks, Proc. Inst. Mech. Eng., Part B, 2022
- A. Shamsolhodaei, A. Ghatei Kalashami. A. Safdel. A.R.H. Midawi, M.A. Elbestawi, P. Peng, Y. Zhou, Resistance spot welding of NiTi shape memory alloy sheets: Microstructural evolution and mechanical properties, J. Manuf. Process, 81, 2022, 467-475
- C. DiGiovanni, L. He, H. Pan, Y. Zhou, E. Biro, Predicting Liquid Metal Embrittlement Severity in Resistance Spot Welding Using Hot-Tensile Testing Data, Weld. World, 66, 2022, 1705-1714
- C.J. Martínez-González, E.A. López-Baltazar, F. Alvarado-Hernández, V. H. Baltazar-Hernández, D.C. Saha, E. Biro, Y. Zhou, On the Measurability and Predictability of HAZ Softening in GMAW of Automotive DP980 Steel, Metals, 12(6), 2022, 1009
- J.P. Oliveira, A. Shamsolhodaei, J. Shen, J.G. Lopes, R.M. Gonçalves, M. de Brito Ferraz, L. Piçarra, Z. Zeng, N. Schell, Y. Zhou, H.S. Kim, Improving the ductility in laser welded joints of CoCrFeMnNi high entropy alloy to 316 stainless steel, Mater. Des., 219, 2021, 110717
- S. Sarmast-Ghahfarokhi, S. Zhang, A. Midawi, F. Goodwin, Y. Zhou, The failure mechanism of resistance spot welded third-generation medium-Mn steel during shear-tension loading, J. Manuf. Process., 79, 2022, 520-531
- D. Shen, H.B. Yang, C. Spudat, T. Patel, S. Zhong, F. Chen, J. Yan, X. Luo, M. Cheng, G. Sciaini, Y. Sun, D. Rhodes, T. Timusk, Y. Zhou, N.Y. Kim, A. Tsen, High-Performance Mid-IR to Deep-UV van der Waals Photodetectors Capable of Local Spectroscopy at Room Temperature, Nano Lett., 22(8), 2022, 3425-3432
- M.S. Khan, S. Ali, D. Westerbaan, W. Duley, E. Biro, Y. Zhou, The effect of laser impingement angle on the optimization of melt pool geometry to improve process stability during high-speed laser welding of thin-gauge automotive steels, J. Manuf. Process., 78, 2022, 242-253
- X. Zhao, D. Shen, W.W. Duley, C. Tan,Y. Zhou, Water-Enabled Electricity Generation: A Perspective, Adv. Energy Sustainability Res., 2022, 2100196
- M.S. Khan, P. Enrique, A. Ghatei-Kalashami*, J.G. Lopes, N. Schell, J.P. Oliveira, E. Biro, Y. Zhou, The influence of in-situ alloying of electro-spark deposited coatings on the multiscale morphological and mechanical properties of laser welded Al-Si coated 22MnB5, Mater. Sci. Eng. A, 839, 2022, 142830
- K. Zhang, P. Peng, Y. Zhou, Laser welding-brazing of NiTi/304 stainless steel wires with beam defocus and large offset, Mater. Sci. Eng. A, 835, 2022, 142660
- S. Zheng, W.W. Duley, P. Peng, Y. Zhou, Laser Modification of Au-CuO-Au Structures for Improved Electrical and Electro-Optical Properties, Nanotechnology, 33, 2022, 245205
- T.A. Rodrigues, N. Bairrão, F.W.C. Farias, A.Shamsolhodaei, J. Shen, Y. Zhou, E. Maawad, N. Schell, T.G. Santos, J.P. Oliveira, Steel-copper functionally graded material produced by twin-wire and arc additive manufacturing (T-WAAM), Mater. Des., 213, 2022, 110270
- A. Ghatei Kalashami, S. Zhang, M. Shojaee, A.R.H. Midawi, F. Goodwin, Y. Zhou, Failure behavior of resistance spot welded advanced high strength steel: The role of surface condition and initial microstructure, J. Mater. Process. Tech., 299, 2022, 117370
- J.P. Oliveira, J. Shen, Z. Zeng, J. Park, Y. Choi, N. Schell, E. Maawad, Y. Zhou, H. Kim, Dissimilar laser welding of a CoCrFeMnNi high entropy alloy to 316 stainless steel, Scripta Mater. 206, 2022. 114219
- Zhang, K., Liu, F., Tan, C., Zhou, Y. N., & Peng, P. (2022). Effect of heat input modes on microstructure, mechanical properties and porosity of laser welded NiTi-316L joints: A comparative study. Materials Science and Engineering: A, 848, 143426
- Zhang, S., Ghatei-Kalashami, A., Midawi, A. R., & Zhou, N. Y. (2022). A comparison between hardness-scaling and ball-indentation techniques on predicting stress/strain distribution and failure behavior of resistance spot welded advanced high strength steel. Journal of Manufacturing Science and Engineering, 144(8), 081006
- Dombroski, D. M., Wang, A., Wen, J. Z., & Alfano, M. (2022). Joining and welding with a nanothermite and exothermic bonding using reactive multi-nanolayers–A review. Journal of Manufacturing Processes, 75, 280-300
- Sarmast-Ghahfarokhi S, Zhang S, Midawi AR, Goodwin F, Zhou YN. Mechanical properties and failure behavior of resistance spot welded medium-Mn steel under static and quasi-static shear-tension loading. Welding in the World, 2022 Aug; 66(8):1609-22.