Laser (LPKF U3) | Academic Rate | Industrial Rate |
Laser Work (Ablation) | $110/hr | $275/hr |
Laser Work (Delamination) | $100/hr | $250/hr |
Setup | Min.:$200 | Min.:$400 |
Milling Machine (LPKF S103)* | Academic Rate | Industrial Rate |
Machine Work (Single sided) | $90/hr | $225/hr |
Machine Work (Double sided) | $100/hr | $250/hr |
Via Plating | $50/hr | $125/hr |
Setup | Min.:$100 | Min.:$200 |
Bonding (tpt) | Academic Rate | Industrial Rate |
Wire Bonding Au | $70/hr | $175/hr |
Ribbon Bonding (AI)/Au | $80/hr | $200/hr |
Setup | Min.:$100/hr | Min.:$200 |
Flip Chip Bonding (Finetech) | Academic Rate | Industrial Rate |
Flip Chip Bonding | $100/hr | $250/hr |
Setup | Min.:$100 | Min.:$200 |
PNAX (Keysight)** | Academic Rate | Industrial Rate |
Measurement by customer, freq. < 50 GHZ | $30/hr | $75/hr |
Measurement by CIARS, freq. < 50 GHZ | $70/hr | $175/hr |
Measurement by customer, freq. > 50 GHZ | $50/hr | $125/hr |
Measurement by CIARS, freq. > 50 GHZ | $90/hr | $22h/hr |
Probe measurement by customer, freq. < 50 GHz | $60/hr | $150/hr |
Probe measurement by CIARS, freq .< 50 GHz | $100/hr | $250/hr |
Probe measurement by customer, freq. > 50 GHz | $100/hr | $250/hr |
Probe measurement by CIARS, freq . > 50 GHz | $140/hr | $350/hr |
Spectrum Analyzer | Academic Rate | Industrial Rate |
Measurement by customer, freq. < 50 GHZ | $20/hr | $50/hr |
Measurement by CIARS, freq. < 50 GHZ | $50/hr | $125/hr |
Measurement by customer, freq. > 50 GHZ | $30/hr | $75/hr |
Measurement by CIARS, freq. > 50 GHZ | $60/hr | $150/hr |
*For available drill bit sizes visit: Rapid Prototyping Lab (RPL)
Should the job require any drill bits which are not included in the list, the customer should provide the required drill bit.
**It
is
recommended
that
customers
bring
their
own
probes
for
measurements.
Rental
fee
for
each
probe:
$150
(Academic)
and
$350
(Industry)
For
available
probes
visit: RF/Microwave,
Millimeter
and
Sub-Millimeter-Wave
System
Lab
All rates are in Canadian Dollars