2018 Publications

Khan, Mohammad Ibraheem, and Yunhong Norman Zhou. Methods and systems for processing materials, including shape memory materials. U.S. Patent Application No. 13/389,335.

Khodabakhshi, Farzad, et al. "Interfacial bonding mechanisms between aluminum and titanium during cold gas spraying followed by friction-stir modification." Applied Surface Science462 (2018): 739-752.

Hook, M. D., Hunter, S., & Mayer, M. (2018). Deriving lifetime predictions for wire bonds at high temperatures. Microelectronics Reliability, 88, 1124-1129.

Nandihalli, Nagaraj, et al. Thermoelectric properties of Ni0. 05Mo3Sb5. 4Te1. 6 composites with NiSb nanocoating. AIP Advances 8.12 (2018): 125304.

Hook, M. D., Mayer, M., & Hunter, S. (2018, May). Effects of Epoxy Molding Compound on Electrical Resistance Degradation of Pd-Coated Cu Wire Bonds in the 175° C to 225° C Range. In 2018 IEEE 68th Electronic Components and Technology Conference (ECTC) (pp. 1427-1433). IEEE.

Midawi, A. R. H., Simha, C. H. M., & Gerlich, A. P. (2018). Assessment of yield strength mismatch in X80 pipeline steel welds using instrumented indentation. International Journal of Pressure Vessels and Piping, 168, 258-268.

Xu, D. E., Kim, J. B., Hook, M. D., Jung, J. P., & Mayer, M. (2018). Real time resistance monitoring during sintering of silver paste. Journal of Alloys and Compounds, 731, 504-514.

Enrique, Pablo D., et al. "In situ formation of metal matrix composites using binder jet additive manufacturing (3D printing)." Materials Letters 232 (2018): 179-182.

Khodabakhshi, F., & Gerlich, A. P. (2018). Potentials and strategies of solid-state additive friction-stir manufacturing technology: A critical review. Journal of Manufacturing Processes, 36, 77-92.

Razmpoosh, Mohammad Hadi, et al. Liquid metal embrittlement in laser lap joining of TWIP and medium-manganese TRIP steel: The role of stress and grain boundaries. Materials Characterization 145 (2018): 627-633.

Khodabakhshi, F., Gerlich, A. P., & Worswick, M. (2018). Fabrication and characterization of a high strength ultra-fine grained metal-matrix AA8006-B4C layered nanocomposite by a novel accumulative fold-forging (AFF) process. Materials & Design, 157, 211-226.

Liang, Robert, et al. Concurrent photocatalytic degradation of organic contaminants and photocathodic protection of steel Ag–TiO2 composites. Materialia 3 (2018): 212-217.

Hiscocks, J., Diak, B. J., Gerlich, A. P., & Daymond, M. R. (2018). Strain localisation and failure of dissimilar magnesium-based alloy friction stir welds. Science and Technology of Welding and Joining, 23(7), 628-634.

Razmpoosh, M. H., et al. Liquid metal embrittlement in laser beam welding of Zn-coated 22MnB5 steel. Materials & Design 155 (2018): 375-383.

Khodabakhshi, F., Nosko, M., & Gerlich, A. P. (2018). Dynamic restoration and crystallographic texture of a friction-stir processed Al–Mg–SiC surface nanocomposite. Materials Science and Technology, 34(14), 1773-1791.

Yang, Jin, et al. "Laser welding/brazing of 5182 aluminium alloy to ZEK100 magnesium alloy using a nickel interlayer." Science and Technology of Welding and Joining 23.7 (2018): 543-550.

Zhao, H., Shen, Z., Booth, M., Wen, J., Fu, L., & Gerlich, A. P. (2018). Calculation of welding tool pin width for friction stir welding of thin overlapping sheets. The International Journal of Advanced Manufacturing Technology, 98(5-8), 1721-1731.

Zhao, Zhenyu, et al. "The mechanism of pore segregation in the sintered nano Ag for high temperature power electronics applications." Materials Letters 228 (2018): 168-171.

Harooni, A., Iravani, M., Khajepour, A., King, J. M., Khalifa, A., & Gerlich, A. P. (2018). Mechanical properties and microstructures in zirconium deposited by injected powder laser additive manufacturing. Additive Manufacturing, 22, 537-547.

DiGiovanni, Christopher, Elliot Biro, and Norman Y. Zhou. "Impact of liquid metal embrittlement cracks on resistance spot weld static strength." Science and Technology of Welding and Joining (2018): 1-7.

Shen, Z., Chen, J., Ding, Y., Hou, J., Shalchi Amirkhiz, B., Chan, K., & Gerlich, A. P. (2018). Role of interfacial reaction on the mechanical performance of Al/steel dissimilar refill friction stir spot welds. Science and Technology of Welding and Joining, 23(6), 462-477.

Jiao, Z., et al. "Surface Modification of 304 Stainless Steel by Electro-Spark Deposition." Journal of Materials Engineering and Performance 27.9 (2018): 4799-4809.

Khodabakhshi, F., Nosko, M., & Gerlich, A. P. (2018). Influence of CNTs decomposition during reactive friction‐stir processing of an Al–Mg alloy on the correlation between microstructural characteristics and microtextural components. Journal of microscopy, 271(2), 188-206.

Jia, Qiang, et al. "Microstructure and mechanical properties of laser welded dissimilar joints between QP and boron alloyed martensitic steels." Journal of Materials Processing Technology 259 (2018): 58-67.

Shah, L. H., Othman, N. H., & Gerlich, A. (2018). Review of research progress on aluminium–magnesium dissimilar friction stir welding. Science and Technology of Welding and Joining, 23(3), 256-270.

Khan, Mohammad Ibraheem, and Yunhong Norman Zhou. "Methods and systems for processing materials, including shape memory materials." U.S. Patent Application No. 13/389,335.

Khodabakhshi, F., Nosko, M., & Gerlich, A. P. (2018). Effects of graphene nano-platelets (GNPs) on the microstructural characteristics and textural development of an Al-Mg alloy during friction-stir processing. Surface and Coatings Technology, 335, 288-305.

Enrique, Pablo D., et al. "Dendritic coarsening model for rapid solidification of Ni-superalloy via electrospark deposition." Journal of Materials Processing Technology 258 (2018): 138-143.

Haghshenas, M., & Gerlich, A. P. (2018). Joining of automotive sheet materials by friction-based welding methods: a review. Engineering science and technology, an international journal, 21(1), 130-148.

Michael, Andrew, et al. "Deconvolution of overlapping peaks from differential scanning calorimetry analysis for multi-phase NiTi alloys." Thermochimica Acta 665 (2018): 53-59.

Khodabakhshi, F., & Gerlich, A. P. (2018). Accumulative fold-forging (AFF) as a novel severe plastic deformation process to fabricate a high strength ultra-fine grained layered aluminum alloy structure. Materials Characterization, 136, 229-239.

Enrique, Pablo D., et al. "Effect of microstructure on tensile properties of electrospark deposition repaired Ni-superalloy." Materials Science and Engineering: A 729 (2018): 268-275.

Shen, Z., Ding, Y., Gopkalo, O., Diak, B., & Gerlich, A. P. (2018). Effects of tool design on the microstructure and mechanical properties of refill friction stir spot welding of dissimilar Al alloys. Journal of Materials Processing Technology, 252, 751-759.

Yang, Jin, et al. "Diode Laser Welding/Brazing of Aluminum Alloy to Steel Using a Nickel Coating." Applied Sciences 8.6 (2018): 922.

Nasiri, A. M., Shen, Z., Hou, J. S. C., & Gerlich, A. P. (2018). Failure analysis of tool used in refill friction stir spot welding of Al 2099 alloy. Engineering Failure Analysis, 84, 25-33.

Shen, Daozhi, et al. "Self‐Powered Wearable Electronics Based on Moisture Enabled Electricity Generation." Advanced Materials 30.18 (2018): 1705925.

Savguira, Y., North, T. H., Gerlich, A. P., & Thorpe, S. J. (2018). The Effect of Second Phase Particle Dissolution on the Corrosion of Friction Stir Spot Welded AZ31B. Journal of The Electrochemical Society, 165(11), C794-C806.

Shen, Daozhi, et al. "Investigation of impact and spreading of molten nanosized gold droplets on solid surfaces." Applied optics 57.9 (2018): 2080-2086.

Shah, L. H., Guo, S., Walbridge, S., & Gerlich, A. (2018). Effect of tool eccentricity on the properties of friction stir welded AA6061 aluminum alloys. Manufacturing Letters, 15, 14-17.

MH Razmpoosh, A Macwan , E Biro, Y Zhou, Effect of coating weight on fiber laser welding of Galvanneal-coated 22MnB5 press hardening steel (PDF), Surf. Coat. Technol., 337(15), 2018, 536-543.

D. Shen, G. Zou, L. Liu, A. Wu, W.W. Duley, Y. Zhou, Investigation of impact and spreading of molten nanosized gold droplets on solid surfaces (PDF) Appl. Optics, 57(9), 2018, 2080-2086. 

Y. Ye, G. Zou, W. Long, H. Bai, A. Wu, L. Liu, Y. Zhou, TLP repaired IN738LC superalloy with uneven surface defect gap width after post heat treatment: Microstructure and ...(PDF),  J. Alloys Compd., 748, 2018, 26-35.

J. Yang, Z. Yu, Y. Li, H. Zhang, N. Zhou, Laser welding/brazing of 5182 aluminium alloy to ZEK100 magnesium alloy using a nickel interlayer (PDF), Sci. Technol. Weld. Join., 24(1), 2018, 6-68.

P Russo, M Xiao, R Liang, NY Zhou, UV‐Induced Multilevel Current Amplification Memory Effect in Zinc Oxide Rods Resistive Switching Devices (PDF), Adv. Funct. Mater., 28, 2018.

J.J. Guzman-Aguilera, C.J. Martinez-Gonzalez, V.H. Baltazar-Hernandez, S. Basak, S.K. Panda, M.H. Razmpoosh, A. Gerlich, Y. Zhou, Influence of SC-HAZ microstructure on the mechanical behavior of Si-TRIP steel welds (PDF), Mater. Sci. Eng. A, 718, 2018, 216-227.

SL. Gora, R. Liang, YN. Zhou, SA. Andrews, Photocatalysis with easily recoverable linear engineered TiO2 nanomaterials to prevent the formation of disinfection ... (PDF),  J. Environ. Chem. Eng., 6(1), 2018, 197-207.

Q Jia, L Liu, W Guo, Y Peng, G Zou, Z Tian, YN Zhou, Microstructure and Tensile-Shear Properties of Resistance Spot-Welded Medium Mn Steel (PDF) Metals, 8(1), 2018, 48(13 pages).

B. Panton, A. Michael, Y. Zhou, M.I. Khan,  Effects of post-processing on the thermomechanical fatigue properties of laser modified NiTi (PDF), Inter. J. Fatigue, 9, 2018. 

D. Shen, G. Zou, L. Liu, W. Zhao, A. Wu, W.W. Duley, Y. Zhou,  Scalable High-Performance Ultraminiature Graphene Micro-Supercapacitors by a Hybrid Technique Combining Direct Writing... (PDF), ACS Appl. Mater. Interfaces, 10(6), 2018, 5404-5412. 

LH Shah, A Gerlich, Y Zhou, Design guideline for intermetallic compound mitigation in Al-Mg dissimilar welding through addition of interlayer (PDF), Inter. J. Adv. Manuf. Tech., 94(5-8), 2018, 2667-2678.

S Gora, R Liang, YN Zhou, S Andrews, Settleable engineered titanium dioxide nanomaterials for the removal of natural organic matter from drinking water (PDF), Chem. Eng. J., 334(2), 2018, 638-649.