2017 Publications

P. Russo, M. Xiao, Y. Zhou, Carbon nanowalls: A new material for resistive switching memory devices (PDF), Carbon, 120, 2017, 54-62.
Hook, M. D., Hunter, S., & Mayer, M. (2017, December). Factors affecting activation energy for Pd-coated Cu ball bond resistance degradation on Al bond pads in high temperature storage. In 2017 IEEE 19th Electronics Packaging Technology Conference (EPTC) (pp. 1-7). IEEE.
Khodabakhshi, F., Marzbanrad, B., Shah, L. H., Jahed, H., & Gerlich, A. P. (2017). Friction-stir processing of a cold sprayed AA7075 coating layer on the AZ31B substrate: structural homogeneity, microstructures and hardness. Surface and Coatings Technology, 331, 116-128.
Ghassemi-Armaki, H., Biro, E., & Sadagopan, S. (2017). Advanced characterization of HAZ softening of AHSS for crash modeling. ISIJ International, ISIJINT-2016.
M. Hatat-Frailea, R. Liang, M.J. Arlos, R.X. He*, P. Peng, M.R. Servos, Y. Zhou, Concurrent photocatalytic and filtration processes using doped TiO2 coated quartz fiber membranes in a photocatalytic ... (PDF), Chem. Eng. J., 2017, 330, 531-540.
Campbell, E. E., He, R., & Mayer, M. (2017). Conductive pathway on cotton fabric created using solution with silver organometallic compound. Materials Research Express, 4(10), 106305.
Ding, Y., Shen, Z., & Gerlich, A. P. (2017). Refill friction stir spot welding of dissimilar aluminum alloy and AlSi coated steel. Journal of Manufacturing Processes, 30, 353-360.
R. Liang, M.J. Arlos, L. Fong, E. Shahnam, P. Peng, M.R. Servos, Y. Zhou, Photocatalytic degradation using one-dimensional TiO2 and Ag-TiO2 nanobelts under UV-LED controlled periodic illumination (PDF), J. Envir. Chem. Eng., 5(5), 2017, 4497-4504.
Hook, M. D., Mayer, M., & Hunter, S. (2017, October). High temperature storage reliability of bond resistance of palladium-coated copper ball bonds. In International Symposium on Microelectronics (Vol. 2017, No. 1, pp. 000432-000437). International Microelectronics Assembly and Packaging Society.
Haghshenas, M., Gharghouri, M. A., Bhakhri, V., Klassen, R. J., & Gerlich, A. P. (2017). Assessing residual stresses in friction stir welding: neutron diffraction and nanoindentation methods. The International Journal of Advanced Manufacturing Technology, 93(9-12), 3733-3747.
N. Lun, D.C. Saha, A. Macwan, H. Pan, L. Wang, F. Goodwin, Y. Zhou, Microstructure and mechanical properties of ﬁbre laser welded medium manganese TRIP steel (PDF), Mater. Des., 131, 2017, 450-459.
Laor, A., Athia, D., Rezvani, A., Clauberg, H., & Mayer, M. (2017). Monitoring of thermo-mechanical stress via CMOS sensor array: Effects of warpage and tilt in flip chip thermo-compression bonding. Microelectronics Reliability, 73, 60-68.
Haghshenas, M., Gharghouri, M. A., Bhakhri, V., Klassen, R. J., & Gerlich, A. P. (2017). Assessing residual stresses in friction stir welding: neutron diffraction and nanoindentation methods. The International Journal of Advanced Manufacturing Technology, 93(9-12), 3733-3747.
R.X. He, R. Liang, P. Peng, Y. Zhou, Effect of the size of silver nanoparticles on SERS signal enhancement (PDF), J Nanopart. Res. 19(8), 2017, 267 (10pp).
Athia, D., Rezvani, A., Clauberg, H., Qin, I., & Mayer, M. (2017, May). Numerical Simulations of Joint-to-Joint Temperature Variation During Thermo-Compression Bonding. In 2017 IEEE 67th Electronic Components and Technology Conference (ECTC) (pp. 1906-1915). IEEE.
Huda, N., Ding, Y., & Gerlich, A. P. (2017). Temper-treatment development to decompose detrimental martensite–austenite and its effect on linepipe welds. Materials science and Technology, 33(16), 1978-1992.
M.J. Arlos, R. Liang, L. Fong, Y. Zhou, C.J. Ptacek, S.A. Andrews, M.R. Servos, Influence of methanol when used as a water-miscible carrier of pharmaceuticals in TiO2 photocatalytic degradation... (PDF), J. Envir. Chem. Eng., 5(5), 2017, 4497-4504.
Xu, D. E., Hook, M. D., & Mayer, M. (2017). Real time joint resistance monitoring during solder reflow. Journal of Alloys and Compounds, 695, 3002-3010.
Dos Santos, E. B., Pistor, R., & Gerlich, A. P. (2017). Pulse profile and metal transfer in pulsed gas metal arc welding: droplet formation, detachment and velocity. Science and Technology of Welding and Joining, 22(7), 627-641.
S. Xing, L. Lin, G. Zou, L. Liu, P. Peng, A. Wu, W.W. Duley, Y. Zhou, Improving the electrical contact at a Pt/TiO2 nanowire interface by selective application of focused femtosecond ... (PDF), Nanotechnology, 28 (2017) 405302 (8pp).
Hook, M. D., & Mayer, M. (2017). Miniature environmental chambers for temperature humidity bias testing of microelectronics. Review of Scientific Instruments, 88(3), 034707.
Khodabakhshi, F., Arab, S. M., Švec, P., & Gerlich, A. P. (2017). Fabrication of a new Al-Mg/graphene nanocomposite by multi-pass friction-stir processing: dispersion, microstructure, stability, and strengthening. Materials Characterization, 132, 92-107.
A. Michael, A. Pequegnat, J. Wang, Y. Zhou, M.I. Khan, Corrosion performance of medical grade NiTi after laser processing (PDF), Surf. Coat. Technol., 324, 2017, 478-485.
Khodabakhshi, F., Gerlich, A. P., & Švec, P. (2017). Reactive friction-stir processing of an Al-Mg alloy with introducing multi-walled carbon nano-tubes (MW-CNTs): microstructural characteristics and mechanical properties. Materials Characterization, 131, 359-373.
P. Oliveira, Z. Zeng, C. Andrei, F.M. Braz Fernandes, R.M. Miranda, A.J. Ramirez, T. Omori, Y. Zhou, Dissimilar laser welding of superelastic NiTi and CuAlMn shape memory (PDF), Mater. Des., 128, 2017, 166-175.
Huda, N., Lazor, R., & Gerlich, A. P. (2017). Study of MA effect on yield strength and ductility of X80 linepipe steels weld. Metallurgical and Materials Transactions A, 48(9), 4166-4179.
M. Sun, S.B. Behravesh, L. Wu, Y. Zhou, H Jahed, Fatigue behavior of dissimilar Al 5052 and Mg AZ31 resistance spot welds with Sn-coated steel interlayer (PDF), Fatigue & Fracture of Engineering Materials & Structures, 40(7), 2017, 1048-1058.
Khodabakhshi, F., Simchi, A., Kokabi, A. H., Gerlich, A. P., Nosko, M., & Švec, P. (2017). Influence of hard inclusions on microstructural characteristics and textural components during dissimilar friction-stir welding of an PM Al–Al2O3–SiC hybrid nanocomposite with AA1050 alloy. Science and Technology of Welding and Joining, 22(5), 412-427.
P. Russo, R. Liang, R.X. He, Y. Zhou, Phase transformation of TiO2 nanoparticles by femtosecond laser ablation in aqueous solution and deposited on ... (PDF), Nanoscale, 9, 2017, 6167-6177.
Gerlich, A. P. (2017). Critical assessment 25: friction stir processing, potential and problems. Materials Science and Technology, 33(10), 1139-1144.
M. Xiao, K.P. Musselman, W.W. Duley, Y. Zhou, Reliable and Low-Power Multilevel Resistive Switching in TiO2 Nanorod Arrays Structured with a TiOx Seed Layer (PDF), ACS Appl. Mater. Interfaces, 9(5), 2017, 4808-4817.
Khodabakhshi, F., Gerlich, A. P., & Švec, P. (2017). Fabrication of a high strength ultra-fine grained Al-Mg-SiC nanocomposite by multi-step friction-stir processing. Materials Science and Engineering: A, 698, 313-325.
P. Peng, W. Guo, Y. Zhu, L. Liu, G. Zou, Y. Zhou, Nanoscale Wire Bonding of Individual Ag Nanowires on Au Substrate at Room Temperature (PDF), Nano-Micro Lett., 9(3), 2017, Article 26, 1-6.
Assunção, P. D. A. C., Ribeiro, R. A., Dos Santos, E. B., Gerlich, A. P., & de Magalhães Braga, E. (2017). Feasibility of narrow gap welding using the cold-wire gas metal arc welding (CW-GMAW) process. Welding in the World, 61(4), 659-666.
O.L. Ighodaro, E Biro, Y. Zhou, Study and applications of dynamic resistance profiles during resistance spot welding of coated hot-stamping steels (PDF), Metall. Mater. Trans. A, 48(2), 2017, 745-758.
Farshidianfar, M. H., Khajepouhor, A., & Gerlich, A. (2017). Real-time monitoring and prediction of martensite formation and hardening depth during laser heat treatment. Surface and Coatings Technology, 315, 326-334.
Q.L. Cui, D. Parkes, D. Westerbaan, S.S. Nayak, Y. Zhou, D.C. Saha*, D. Liu, F. Goodwin, S. Bhole, D.L. Chen, Tensile and Fatigue Properties of Single and Multiple Dissimilar Welded Joints of DP980 and HSLA (PDF), ASM J. Mater. Eng. Perform., 21(2), 2017.
Khajepour, Amir, Mohammad Hossein Farshidianfar, and Adrian Gerlich. "System and method for real time closed-loop monitoring and control of material properties in thermal material processing." U.S. Patent Application No. 15/287,951.
M. Xiao, K.P. Musselman, W.W. Duley, Y. Zhou, Resistive Switching Memory of TiO2Nanowire Networks Grown on Ti Foil by a Single Hydrothermal Method (PDF), Nano-Micro Lett., 9(2), 2017, Article 15, 1-9.
Khodabakhshi, F., Haghshenas, M., Chen, J., Shalchi Amirkhiz, B., Li, J., & Gerlich, A. P. (2017). Bonding mechanism and interface characterisation during dissimilar friction stir welding of an aluminium /polymer bi-material joint. Science and Technology of Welding and Joining, 22(3), 182-190.
W. Guo, H. Zhang, X. Zhang, L. Liu, P. Peng, G. Zou, Y. Zhou, Preparation of nanoparticle and nanowire mixed pastes and their low temperature sintering (PDF), J. Alloys Compd., 690, 2017, 86-94.
Marques, L. F. N., Santos, E. B. F., Gerlich, A. P., & Braga, E. M. (2017). Fatigue life assessment of weld joints manufactured by GMAW and CW-GMAW processes. Science and Technology of Welding and Joining, 22(2), 87-96.
Hiscocks, J., Diak, B. J., Gerlich, A. P., & Daymond, M. R. (2017). Influence of magnesium AZ80 friction stir weld texture on tensile strain localisation . Materials Science and Technology, 33(2), 189-199.
Dos Santos, E., Kuroiwa, L., Ferreira, A., Pistor, R., & Gerlich, A. (2017). On the visualization of gas metal arc welding plasma and the relationship between arc length and voltage. Applied Sciences, 7(5), 503.
Dos Santos, E. B., Pistor, R., & Gerlich, A. P. (2017). High frequency pulsed gas metal arc welding (GMAW-P): the metal beam process. Manufacturing letters, 11, 1-4.
Midawi, A. R. H., Simha, C. H. M., Gesing, M. A., & Gerlich, A. P. (2017). Elastic-plastic property evaluation using a nearly flat instrumented indenter. International Journal of Solids and Structures, 104, 81-91.

COVID-19 updates:

2017 Publications

Related links