AQU-01: Develop Dry Polymer Makedown System Using High Shear Mechanical Mixing

Description of Organization

Aquafy Water Technologies Inc. A sales company focused on innovative treatment technologies for water and wastewater treatment plants.


Problem area

Dry polymer (typically polyacrylamide) is a flocculant used in water and wastewater treatment, oil recovery, tailings treatment, etc. They come as nonionic, anionic, or cationic charge and have different molecular weights. Dry polymer is difficult to effectively mix with water and is very hygroscopic:. Using a high shear, mechanical wetting device to mix the powder with water will allow for the solution to be made-up at a higher concentration in a shorter amount of time, greater decreasing the equipment footprint. Furthermore, the polymer will be properly hydrated, as determined by measuring the solution viscosity, which increases over time. Another benefit of properly hydrating the polymer solution is that the user can significantly reduce the annual polymer consumption with polymer costs often ranking third behind labour and energy at many treatment facilities.


Main objectives

Develop a dry polymer, high shear wetting device to mix the polymer with water at concentrations between 0.1 to 1.0%. The device must must be a once through configuration (i.e. water flows in, powder is added, both go through a high shear zone, solution exists the device). Consideration should be given to the hygroscopic: nature of the polymer, coming up with ways to prevent the polymer from reacting with moisture in the air and caking on the insides of the device. The device should be economical and should have the ability to be manufactured in a factory.


Scope of work

  • Conduct a literature review.
  • Learn from Aquafy about dry polymer makedown systems by attending a technical presentation.
  • Design a device using CAD.
  • Build a CFD model to simulate the mixing of the dry polymer with dilution water.
  • Build a prototype.
  • Test the prototype on dry polymer solutions, measuring viscosity to determine effectiveness.

Deliverables 

  • Report
  • Presentation
  • Resources
  • New protocols/processes

Frequency

  • Weekly

Skills and training required 

  • Analytical skills
  • CAD skills
  • CFD modelling skills
  • Machining skills including 3D printing
  • Capable of the fabrication of a prototype
  • Testing skills
  • Report writing skills
  • Communication skills

Resources required 

  • Computing resources
  • 3D printer
  • Fabrication capabilities

NDA or a commercialization agreement for this project?

Yes