Yilang Wu - Principal Scientist, Program/Platform Manager at Xerox Research Center of CanadaSeminars and talks
Title: Nanomaterials and Interface Engineering for Printed Electronics
Monday, November 10, 2014
E5 3052
10:30 – 11:30
Dr. Kevin Mussleman
Junior Research Fellow in the Department of Physics at the University of Cambridge
Title: Anodic alumina templates for nanostructured solar cells
Friday, September 5, 2014
E5 2004
2:15 PM - 3:00 PM
Prof. Hani Henein, PEng., PhD, FCAE, FCIM
Advanced Materials and Processing Laboratory
University of Alberta
Title: The Quantitative Analysis of Metastable Solidified Structures
DATE: Friday, July 18, 2014
TIME: 10:30 a.m. to 11:30 a.m.
ROOM: E5 3052
Dr. Victor Yang (H)BASc, MASc, MD, PhD, PEng, FRCSC
Neurosurgeon, Department of Surgery, Sunnybrook Health Science Centre
Associate Professor, Division of Neurosurgery, Faculty of Medicine, University of Toronto
Lab Affiliations: Biophotonics and Bioengineering Lab, Ryerson University
Brain Sciences and Physical Sciences, Sunnybrook Research Institute
Title:Taking smart catheters and optical imaging into the operating room: a surgeon-engineer's perspective
DATE: Wednesday June 11, 2014
TIME: 2:30 – 3:30
ROOM: E5 2004
Mr. Claude Lelièvre
Materials Engineer, Transportation Safety Board of Canada
Title: Case Studies of Mechanical and Material Failures
Tuesday, June 10
3:30 PM - 5:00 PM
CPH 3679
Dr. Ibrahim Guven, Assistant Professor, Materials Science and Engineering Department, University of Arizona
Title: Peridynamic Theory for Predicting Failure in Solids
Date: Monday, January 13, 2014
Time: 2:30 P.M.
Room: DWE 3517
Dr. Changqing Liu (Loughborough University, U.K)
Friday, April 16th,1:30 pm in RCH 308.
will be giving a talk “Materials and Processes to Enable Multifunctional Miniaturisation”
Dr. Erik P. Wassen, TU-Berlin
Numerical Simulation of Active Separation Control
Thursday, July 8th, 1:30-2:30 PM, DWE 2536
Active flow control has been investigated extensively in recent years in order to improve the performance or reduce the losses in engineering systems. One important area of flow control applications is flow separation. Separation can be induced either by an adverse pressure gradient or by sudden changes in the geometry, such as sharp edges. Two examples of active separation control applications will be shown. The first one uses periodic blowing and suction (synthetic jet and pulsed blowing) to control the pressure-induced separation on the trailing edge flap of a high-lift system. The second approach uses steady blowing, steady suction or synthetic jet actuation in order to control the wake and reduce the drag of a road vehicle model.