Implementing Group Work in the Classroom

Group work can be an effective method to motivate students, encourage active learning, and develop key critical-thinking, communication, and decision-making skills. But without careful planning and facilitation, group work can frustrate students and instructors, and feel like a waste of time. Use these suggestions to help implement group work successfully in your classroom.

Preparing for Group Work

Think carefully about how students will be physically arranged in groups. Will it be easy for groups to form and for all students to be comfortable? Also think about how the layout of your classroom will impact volume. Will students be able to hear one another clearly? How can you moderate the activity to control volume?
Set clear guidelines on professional, civil conduct between and among students to respect people’s differences and create an inclusive environment.
Talk to students about their past experiences with group work and allow them to establish some ground rules for successful collaboration. This discussion can be successfully done anonymously through the use of note cards.

Designing the Group Activity

Identify the instructional objectives. Determine what you want to achieve through the small group activity, both academically (e.g., knowledge of a topic) and socially (e.g., listening skills). The activity should relate closely to the learning objective(s) and class content, and must be designed to help students learn, not simply to occupy their time. When deciding whether or not to use group work for a specific task, consider these questions: What is the objective of the activity? How will that objective be furthered by asking students to work in groups? Is the activity challenging or complex enough that it requires group work? Will the project require true collaboration? Is there any reason why the assignment should not be collaborative?
Make the task challenging. Consider giving a relatively easy task early in the term to arouse students’ interest in group work and encourage their progress. In most cases collaborative exercises should be stimulating and challenging. By pooling their resources and dealing with differences of opinion that arise, groups of students can develop a more sophisticated product than they could as individuals. See our teaching tip “Group work in the Classroom: Small-Group Tasks” for some ideas.
Assign group tasks that encourage involvement, interdependence, and a fair division of labour. All group members should feel a sense of personal responsibility for the success of their teammates and realize that their individual success depends on the group’s success. Johnson, Johnson, and Smith (2014) refer to this as positive interdependence and argue that this type of cooperative learning tends to result in learners promoting each other's success. Knowing that peers are relying on you is a powerful motivator for group work.
- Allocate essential resources across the group so that group members are required to share information (e.g., the jigsaw method). Or, to come up with a consensus, randomly select one person to speak for the group, or assign different roles to group members so that they are all involved in the process (e.g., recorder, spokesperson, summarizer, checker, skeptic, organizer, observer, timekeeper, conflict resolver, liaison to other groups).
- Another strategy for promoting interdependence is specifying common rewards for the group, such as a group mark. See the CTE teaching tip “Methods for Assessing Group Work” for more information.
Decide on group size. The size you choose will depend on the number of students, the size of the classroom, the variety of voices needed within a group, and the task assigned. Groups of four-five tend to balance the needs for diversity, productivity, active participation, and cohesion. The less skillful the group members, the smaller the groups should be (Gross Davis, 1993).

Decide how you will divide students into groups. Division based on proximity or students’ choice is quickest, especially for large and cramped classes, but this often means that students end up working together with friends or with the same people.
- To vary group composition and increase diversity within groups, randomly assign students to groups by counting off and grouping them according to number.
- For some group tasks, the diversity within a group (e.g., gender, ethnicity, level of preparation) is especially important, and you might want to assign students to groups yourself before class. Collect a data card from each student on the first day of class to glean important information about their backgrounds, knowledge, and interests. Alternately, ask students to express a preference (e.g., list three students with whom they would most like to work or two topics they would most like to study), and keep their preferences in mind as you assign groups.
Allow sufficient time for group work. Recognize that you won't be able to cover as much material as you could if you lectured for the whole class period. Cut back on the content you want to present in order to give groups time to work. Estimate the amount of time that subgroups need to complete the activity. Also plan for a plenary session in which groups’ results can be presented or general issues and questions can be discussed.
Design collaborative work in multiple forms: pairs, small groups, large groups, online synchronously, online asynchronously, etc. Some students might be better at contributing after they have had time to digest material, while others might be better at thinking on the spot. Other students will defer to others in large groups but actively contribute in pairs. All roles should be valued and included.

Introducing the Group Activity

Share your rationale for using group work. Students must understand the benefits of collaborative learning. Don't assume that students know what the pedagogical purpose is. Explicitly connect these activities to larger class themes and learning outcomes whenever possible.
Have students form groups before you give them instructions. If you try to give instructions first, students may be too preoccupied with deciding on group membership to listen to you.
Facilitate some form of group cohesion. Students work best together if they know or trust each other, at least to some extent. Even for brief group activities, have students introduce themselves to their group members before attending to their task. For longer periods of group work, consider introducing an icebreaker or an activity designed specifically to build a sense of teamwork.
Explain the task clearly. This means both telling students exactly what they have to do and describing what the final product of their group work will look like. Explaining the big picture or final goal is important, especially when the group work will take place in steps (such as in snowballing or jigsaw). Prepare written or visual instructions (e.g., charts, sequential diagrams) for students. Remember to include time estimations for activities.
Set ground rules for group interaction. Especially for extended periods of group work, establish how group members should interact with one another, including principles such as respect, active listening, and methods for decision making. Consider making a group contract. See Group Decision Making, a CTE teaching tip prepared for students working in groups, and Making Group Contracts.
Let students ask questions. Even if you believe your instructions are crystal clear, students may have legitimate questions about the activity. Give them time to ask questions before they get to work.

Monitoring the Group Task

Monitor the groups but do not hover. As students do their work, circulate among the groups and answer any questions raised. Also listen for trends that are emerging from the discussions, so that you can refer to them during the subsequent plenary discussion. Avoid interfering with group functioning — allow time for students to solve their own problems before getting involved. You might consider leaving the room for a short period of time. Your absence can increase students’ willingness to share uncertainties and disagreements (Jaques, 2000).
Be slow to share what you know. If you come upon a group that is experiencing uncertainty or disagreement, avoid the natural tendency to give the answers or resolve the disagreement. If necessary, clarify your instructions, but let students struggle — within reason — to accomplish the task (Race, 2000).
Clarify your role as facilitator. If students criticize you for not contributing enough to their work, consider whether you have communicated clearly enough your role as facilitator.

Ending the Group Task

Provide closure to the group activities. Students tend to want to see how their work in small groups was useful to them and/or contributed to the development of the topic. You can end with a plenary session in which students do group reporting. Effective group reporting “can make the difference between students’ feeling that they are just going through their paces and the sense that they are engaged in a powerful exchange of ideas” (Brookfield & Preskill, 1999, p. 107).
- Oral reports: Have each group give one idea and rotate through the groups until no new ideas arise. Or have each group give their most surprising or illuminating insights or their most challenging question. You can record ideas raised to validate their value.
- Written reports: Have each group record their ideas and either present them yourself or have a group member do so. One variation on this is to have groups record their conclusions on a section of the blackboard or on flipchart paper that is then posted on the wall. Students then informally circulate around the room and read each other’s answers. Alternately, you can ask students to move around the room in small groups, rotating from one set of comments to another and adding their own comments in response. Another variation on written reports is to have students write brief comments on Post-it notes or index cards. Collect them, take a few minutes to process them or put them in sequence, then summarize their contents.
Model how you want students to participate. When responding to students’ answers, model the respect and sensitivity that you want the students to display towards their classmates. Be ready to acknowledge and value opinions different from your own. Be willing to share your own stories, critique your work, and summarize what has been said.
Connect the ideas raised to course content and objectives. Recognize that groups might not come up with the ideas you intended them to, so be willing to make your lecture plans flexible. Wherever possible, look for a connection between group conclusions and the course topic. However, be aware that misconceptions or inaccurate responses need to be clarified and corrected either by you or by other students.
Don’t provide too much closure. Although the plenary session should wrap up the group work, feel free to leave some questions unanswered for further research or for the next class period. This openness reflects the nature of knowledge.
Ask students to reflect on the group work process. They may do so either orally or in writing. This reflection helps them discover what they learned and how they functioned in the group. It also gives you a sense of their response to group work.

Support

If you would like support applying these tips to your own teaching, CTE staff members are here to help. View the CTE Support page to find the most relevant staff member to contact.

References

Brookfield, S.D., & Preskill, S. (1999). Discussion as a Way of Teaching: Tools and Techniques for Democratic Classrooms. San Francisco: Jossey-Bass Publishers.
Gross Davis, B. (1993). Tools for Teaching. San Francisco: Jossey-Bass Publishers.
Jaques, D. (2000). Learning in Groups: A Handbook for Improving Group Work, 3rd ed. London: Kogan Page.
Johnson, D. W., Johnson, R. T., & Smith, K. A. (2014). Cooperative learning: Improving university instruction by basing practice on validated theory. Journal on Excellence in College Teaching, 25(3&4), 85-118.
Race, P. (2000). 500 Tips on Group Learning. London: Kogan Page.
Roberson, B., & Franchini, B. (2014). Effective task design for the TBL classroom. Journal on Excellence in College Teaching, 25(3&4), 275-302.

Resources

CTE teaching tips

Other resources

Journal on Excellence in College Teaching (2014). Special Focus Issue: Small-Group Learning in Higher Education — Cooperative, Collaborative, Problem-Based, and Team-Based Learning.
Johnson, D.W., Johnson, R.T., and Smith, K.A. (2006). Active learning: Cooperation in the university classroom (3^rd edition). Edina, MN: Interaction.
Silberman, M. (1996). Active Learning: 101 Strategies to Teach Any Subject. Boston: Allyn and Bacon.

This Creative Commons license lets others remix, tweak, and build upon our work non-commercially, as long as they credit us and indicate if changes were made. Use this citation format: Implementing Group Work in the Classroom. Centre for Teaching Excellence, University of Waterloo.