2023
"Age-sensitive high density surface electromyogram indices for detecting muscle fatigue using core shape modelling", Biomedical Signal Processing and Control, vol. 81, 01/2023.
krishnan_2022.pdf (947.76 KB) ,

"Energy-Efficient Actuator Design Principles for Robotic Leg Prostheses and Exoskeletons: A Review of Series Elasticity and Backdrivability", ASME Journal of Computational and Nonlinear Dynamics, 2023.
Laschowski 2023 (3.62 MB) ,

"Multibody Dynamics and Control using Machine Learning", Multibody System Dynamics, 2023.
hashemi2023.pdf (1.2 MB) ,

2022
"Simulation of Energy Regeneration in Human Locomotion for Efficient Exoskeleton Actuation", IEEE RAS/EMBS International Conference for Biomedical Robotics and Biomechatronics (BioRob): IEEE, 11/2022.
Laschowski 2022 (833.06 KB) ,

"A review of dynamic models and measurements in golf", Sports Engineering, vol. 25, issue 1, pp. 1-19, 12/2022.
review_golf.pdf (1.92 MB) ,

"Environment Classification for Robotic Leg Prostheses and Exoskeletons using Deep Convolutional Neural Networks", Frontiers in Neurorobotics, vol. 15: bioRxiv, 02/2022.
Laschowski2022 (3.9 MB) ,

"Model-Based Design and Optimization of Passive Shoulder Exoskeletons", J. Comput. Nonlinear Dynam., vol. 17, issue 5, 03/2022.
Nasr_2022 (1.31 MB) ,

"Model-Based Mid-Level Regulation for Assist-As-Needed Hierarchical Control of Wearable Robots: A Computational Study of Human-Robot Adaptation", Robotics, vol. 11, issue 1, 01/2022.
Nasr_2022 (4.78 MB) ,

"Optimal design of active-passive shoulder exoskeletons: a computational modeling of human-robot interaction", Multibody System Dynamics, 11/2022.
nasr_2022.pdf (2.39 MB) ,

"Predictive multibody dynamic simulation of human neuromusculoskeletal systems: a review", Multibody System Dynamics, 11/2022.
review_mubo.pdf (422.88 KB) ,

2021
"Computer Vision and Deep Learning for Environment-Adaptive Control of Robotic Lower-Limb Exoskeletons", Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC): IEEE , 04/2021.
Laschowski_2021 (4.31 MB) ,

"Model-Based Design and Optimization of Passive Shoulder Exoskeletons", ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: ASME, 2021.
nasr_2021a.pdf (1.27 MB) ,

"Myoelectric Control of Robotic Leg Prostheses and Exoskeletons: A Review", ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: ASME, 2021.
Nasr_2021 (1.81 MB) ,

"Simulating Human Upper and Lower Limb Balance Recovery Responses Using Nonlinear Model Predictive Control", Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC), Mexico, IEEE, 12/2021.
inkol_embc2021.pdf (1.1 MB) ,

"Baseball Pitching Arm 3-D Inertial Parameter Calculations from Body Composition Imaging and a Novel Overweight Measure for Youth Pitching Arm Kinetics", Journal of Biomechanical Engineering, 2021.
Jennings_2021 (284.93 KB) ,

"InverseMuscleNET: Alternative Machine Learning Solution to Static Optimization and Inverse Muscle Modeling", Frontiers in Computational Neuroscience, 12/2021.
Nasr_2021 (3.51 MB) ,

"MuscleNET: mapping electromyography to kinematic and dynamic biomechanical variables by machine learning", Journal of Neural Engineering, 08/2021.
nasr_2021b.pdf (3.27 MB) ,

"Simulation of Stand-to-Sit Biomechanics for Robotic Exoskeletons and Prostheses with Energy Regeneration", IEEE Transactions on Medical Robotics and Bionics, vol. 3, issue 2, 05/2021.
Laschowski_2021 (1.52 MB) ,

2020
"Adjusting a Momentum-Based Golf Clubhead-Ball Impact Model to Improve Accuracy", 13th conference of the International Sports Engineering Association, Online, 22–26 June 2020, 06/2020.
,
"Assessing Control of Fixed-Support Balance Recovery in Wearable Lower-Limb Exoskeletons Using Multibody Dynamic Modelling", International Conference on Biomedical Robotics and Biomechatronics (BIOROB), 2020.
Keaton_2020 (1.23 MB) ,

"Comparative Analysis of Environment Recognition Systems for Control of Lower-Limb Exoskeletons and Prostheses", IEEE RAS/EMBS International Conference for Biomedical Robotics and Biomechatronics (BioRob), New York City, NY, USA, IEEE, 10/2020.
Laschowski_2020_BioRob (546.25 KB) ,

"Investigating the Influence of Shaft Balance Point on Clubhead Speed: A Simulation Study", 13th conference of the International Sports Engineering Association, 06/2020.
,
"Comparison of Direct Collocation Optimal Control to Trajectory Optimization for Parameter Identification of an Ellipsoidal Foot–Ground Contact Model", Multibody System Dynamics, 2020.
Ezati_2020 (2.27 MB) ,

"ExoNet Database: Wearable Camera Images of Human Locomotion Environments", Frontiers in Robotics and Artificial Intelligence, vol. 7, issue 562061, 12/2020.
Laschowski_2020_Frontiers (548.61 KB) ,

"Muscle torque generators in multibody dynamic simulations of optimal sports performance", Multibody System Dynamics, 06/2020.
,
"Optimal control of joint torques using direct collocation to maximize ball carry distance in a golf swing", Multibody System Dynamics, 2020.
brown_2020.pdf (588.71 KB) ,

"Predictive Dynamic Simulation of Olympic Track Cycling Standing Start Using Direct Collocation Optimal Control", Multibody System Dynamics, 2020.
Jansen_2020 (2.25 MB) ,

"Predictive Forward Dynamic Simulation of Manual Wheelchair Propulsion on a Rolling Dynamometer", ASME Journal of Biomechanical Engineering, 2020.
brown_2020.pdf (725.86 KB) ,

2019
"GolfDB: A Video Database for Golf Swing Sequencing", The IEEE Conference on Computer Vision and Pattern Recognition (CVPR) Workshops, 05/2019.
,
"Preliminary Design of an Environment Recognition System for Controlling Robotic Lower-Limb Prostheses and Exoskeletons", IEEE International Conference on Rehabilitation Robotics (ICORR) , Toronto, Canada, IEEE , 07/2019.
Laschowski_2019_ICORR (398.57 KB) ,

"STAR-Net: Action Recognition using Spatio-Temporal Activation Reprojection", 16th Conference on Computer and Robot Vision (CRV), 04/2019.
,
"A continuous analytical shaft model for fast dynamic simulation of the golf swing", Sports Engineering, vol. 22, 11/2019.
,
"A Modified Homotopy Optimization for Parameter Identification in Dynamic Systems with Backlash Discontinuity", Nonlinear Dynamics, vol. 95, issue 1, 2019.
,
"A Review of Simulation Methods for Human Movement Dynamics with Emphasis on Gait", Multibody System Dynamics, 2019.
ezati_2019.pdf (670.78 KB) ,

"A Synergy-Based Motor Control Framework for the Fast Feedback Control of Musculoskeletal Systems", ASME Journal of Biomechanical Engineering, vol. 141, issue 3, 2019.
,
"Lower-Limb Prostheses and Exoskeletons with Energy Regeneration: Mechatronic Design and Optimization Review", ASME Journal of Mechanisms and Robotics, vol. 11, issue 4, 2019.
laschowski_2019.pdf (884.21 KB) ,

"On the Relationship Between Muscle Synergies and Redundant Degrees of Freedom in Musculoskeletal Systems", Frontiers in Computational Neuroscience, vol. 13, 2019.
,
"Integration of Machine Learning with Dynamics and Control: From Autonomous Cars to Biomechatronics", Canadian Society for Mechanical Engineering (CSME) Bulletin, no. 7-8, 2019.
Hashemi_2019 (341.59 KB) ,

2018
"Action Recognition using Deep Convolutional Neural Networks and Compressed Spatio-Temporal Pose Encodings", 4th Annual Conference on Vision and Intelligent Systems (CVIS), 12/2018.
,
"Dynamic Optimization of the Golf Swing Using a Six Degree-of-Freedom Biomechanical Model", 12th Conference of the International Sports Engineering Association, 02/2018.
,
"The Golf Shaft’s Influence on Clubhead-Ball Impact Dynamics", 12th conference of the International Sports Engineering Association, Brisbane, 02/2018.
,
"Powertrain Modeling and Model Predictive Longitudinal Dynamics Control for Hybrid Electric Vehicles", SAE World Congress, 2018.
hosking2018a.pdf (1 MB) ,

"A Control-Oriented Modular One-Dimensional Model for Wall-Flow Diesel Particulate Filters", International Journal of Engine Research, vol. 19, issue 3, 2018.
,
"A Synergy-Based Motor Control Framework for the Fast Feedback Control of Musculoskeletal Systems", ASME Journal of Biomechanical Engineering, 2018.
razavian_2018.pdf (15.48 MB) ,

"Anti-Jerk Dynamic Modeling and Parameter Identification of an Electric Vehicle Based on Road Tests", ASME Journal of Computational and Nonlinear Dynamics, 2018.
batra2018 (3.33 MB) ,

"Constrained Dynamic Optimization of Sit-To-Stand Motion Driven by Bézier Curves", ASME Journal of Biomechanical Engineering, 2018.
normangerum_2018.pdf (6.76 MB) ,

"Feedback Control of Functional Electrical Stimulation for 2D Arm Reaching Movements", IEEE Transactions on Neural Systems and Rehabilitation Engineering, 2018.
razavian2018a.pdf (6.35 MB) ,

"Optimization-Based Motor Control of a Paralympic Wheelchair Athlete", Sports Engineering, vol. 21, 2018.
Laschowski2018 (1.02 MB) ,

"Symbolic Integration of Multibody System Dynamics with the Finite Element Method", Multibody System Dynamics, vol. 43, issue 4, 08/2018.
,
2017
"Feedback Control of Functional Electrical Stimulation for Arbitrary Upper Extremity Movements", IEEE International Conference on Rehabilitation Robotics (ICORR), London, UK, pp. 1451-1456, 2017.
razavian2017b.pdf (2.11 MB) ,

"Feedback control of upper extremity motion with FES", Annual Conference of the International Functional Electrical Stimulation Society, London, UK, 2017.
razavian2017a.pdf (100.06 KB) ,

"Volumetric Contact Model of Ellipsoid-Plane Geometries", ECCOMAS Thematic Conference on Multibody Dynamics, Prague, Czech Republic, 2017.
brown_eccomas_2017.pdf (130.01 KB) ,

"A 3D ellipsoidal volumetric foot-ground contact model for forward dynamics", Multibody System Dynamics, 2017.
,
"A control-oriented modular one-dimensional model for wall-flow diesel particulate filters", International Journal of Engine Research, pp. 1-19, 2017.
hassanpour2017.pdf (727.21 KB) ,

"Estimation of Maximum Finger Tapping Frequency Using Musculoskeletal Dynamic Simulations", ASME Journal of Computational and Nonlinear Dynamics, vol. 12, issue 5, 2017.
sharifshourijeh2017a.pdf (1.81 MB) ,

"Predictive Simulation of Reaching Moving Targets Using Nonlinear Model Predictive Control", Frontiers in Computational Neuroscience, vol. 10, issue 143, 2017.
mehrabi2017a.pdf (2.2 MB) ,

"Contact Modelling for Forward Dynamics of Human Motion", Systems Design Engineering, vol. MASc, Waterloo, University of Waterloo, 2017.
brown_peter.pdf (1.92 MB) ,

2016
"Effect of Clubhead Inertial Properties and Driver Face Geometry on Golf ball Trajectories", 11th conference of the International Sports Engineering Association, 12/2016.
,
"A 3D Volumetric Foot-Ground Contact Model", CSB 2016, Hamilton, Canada, 2016.
,
"A motor control framework for the fast control of a 3D musculoskeletal arm motion using muscle synergy", International Multibody Systems Dynamics, Montreal, Canada, 2016.
Link to PDF (1.46 MB) ,

"A real-time physics-based model for compressible flow in wall-flow diesel particulate filters under transient loading", Proceedings of The Canadian Society for Mechanical Engineering International Congress 2016, Kelowna, BC, Canada, Canadian Society for Mechanical Engineering, pp. 1-6, June, 2016.
,
"A reduced control-oriented model for quasi one dimensional flow in area varying channels", Proceedings of the 24th International Congress of Theoretical and Apllied Mechanics, Montreal, QC, Canada, pp. 1-2, August, 2016.
,
"An Efficient and Continuous Friction Model with Physically Meaningful Parameters", IMSD 2016, Montréal, Canada, 2016.
,
"Application of Newton/GMRES Method to Nonlinear Model Predictive Control of Functional Electrical Stimulation", The 3rd International Conference on Control, Dynamic Systems, and Robotics (CDSR’16), Ottawa, Ontario, Avestia, 2016.
,
"Application of Newton/GMRES Method to Nonlinear Model-Predictive Control of Functional Electrical Stimulation", 3rd International Conference on Control, Dynamic Systems, and and Robotics, Ottawa, Canada, 2016.
Link to PDF (3.55 MB) ,

"Computational motor control framework based on muscle synergy. Perspectives from dynamics and control engineering", 19th Biennial Meeting of the Canadian Society for Biomechanics, Hamilton, Ontario, 2016.
,
"Control of redundant musculoskeletal systems using muscle synergies", Biomechanics and Neural Control of Movements, Mt Sterling, OH, 2016.
,
"Estimation of maximum muscle contraction frequency in fnger tapping motion using forward musculoskeletal dynamic simulations", International Multibody Systems Dynamics, Montreal, Canada, 2016.
sharifshourijeh2016.pdf (1.03 MB) ,

"Nonlinear Model Predictive Control of a Human-Robot Rehabilitation System", 19th Biennial Meeting of the Canadian Society for Biomechanics, Hamilton, Ontario, 2016.
,
"Optimal Control of Paralympic Wheelchair Curling", 19th Biennial Meeting of the Canadian Society for Biomechanics, Canada, 2016.
,
"Optimal Dynamics of Human Vertical Jumping", 19th Biennial Meeting of the Canadian Society for Biomechanics, Hamilton, Ontario, 2016.
,
"Predictive Simulation of Cycling with Muscle Fatigue", The 4th Joint International Conference on Multibody System Dynamics, May 29 – June 2, 2016.
,
"Predictive Simulation of Reaching to Moving Targets using Nonlinear Model Predictive Control", The 8th Asian Conference on Multibody Dynamics, Kanazawa, Japan, 2016.
,
"Quantifying Body Segment Parameters Using Dual-Energy X-Ray Absorptiometry: A Paralympic Wheelchair Curler Case Report", Conference of the International Sports Engineering Association, vol. 147: Procedia Engineering, 2016.
Laschowski_2016 (180.3 KB) ,

"Real-time solution of one-dimensional distributed-parameter models with application to compressible flow in diesel particulate filters", Proceedings of the 24th International Congress of Theoretical and Apllied Mechanics, Montreal, QC, Canada, pp. 1-2, August, 2016.
,
"Statistical Analyses of Unidirectional Static Forces on Instrumented Rowing Oarlocks", Conference of the International Sports Engineering Association, vol. 147: Procedia Engineering, 2016.
Laschowski_2016 (2) (446.82 KB) ,

"Thermofluid Connector: a new environment for acausal modeling of thermofluid systems", North America Modelica Users' Group Conference, Troy, MI, USA, pp. 1-3, September, 2016.
,
"A Continuous Velocity-Based Friction Model for Dynamics and Control With Physically Meaningful Parameters", ASME Journal of Computational and Nonlinear Dynamics, vol. 11, pp. 054502, 2016.
,
"Body Segment Parameters of Paralympic Athletes from Dual-Energy X-Ray Absorptiometry", Sports Engineering, vol. 19, 2016.
,
"Inverse Dynamics Modelling of Paralympic Wheelchair Curling", Journal of Applied Biomechanics, 2016.
laschowski_et_al_2016.pdf (940.66 KB) ,

"Modelling the Deflection of Rowing Oar Shafts", Sports Biomechanics, vol. 16, issue 1, 2016.
,
Biomechanical Modelling of Paralympic Wheelchair Curling: University of Waterloo, 2016.
,
2015
"Control of Musculoskeletal Arm Model Using Muscle Synergy", International Society of Biomechanics, Glasgow, UK, 2015.
,
"Development of a human-robot dynamic model for the model-based controller design of an upper limb rehabilitation robot", ECCOMAS Thematic Conference on Multibody Dynamics, {June 29 - July 2}, Barcelona, Catalonia, Spain, 2015.
,
"Minimization of Muscle Fatigue as the Criterion to Solve Muscle Forces-Sharing Problem", ASME 2015 Dynamic Systems and Control Conference, vol. 1, Columbus, OH, pp. V001T15A001; 8 pages, 2015.
,
"Volumetric Contact Knee Model for Forward Dynamics Simulation", Ontario Biomechanics Conference, Alliston, ON, 2015.
,
"A Comparative Analysis of Route-based Energy Management Systems for PHEVs", Asian Journal of Control, Accepted, 2015.
,
"A model-based approach to predict muscle synergies using optimization: application to feedback control", Frontiers in computational neuroscience, 2015.
,
"A Neuronal Model of Central Pattern Generator to Account for Natural Motion Variation", ASME Journal of Computational and Nonlinear Dynamics, vol. 11, Aug, 2015.
,
"A Physics-Based Musculoskeletal Driver Model to Study Steering Tasks", ASME Journal of Computational and Nonlinear Dynamics, vol. 10, pp. 1-8, 2015.
,
"A robust safety-oriented autonomous cruise control scheme for electric vehicles based on model predictive control and online sequential extreme learning machine with a hyper-level fault tolerance-based supervisor", Neurocomputing, vol. 151, 2015.
,
"Acasual Powertrain Modelling with Cycle-by-cycle Spark Ignition Engine Model", International Journal of Powertrains, 2015.
,
"An Optimal Gear Shifting Strategy for Heavy Trucks with Trade-off Study Between Trip Time and Fuel Economy", International Journal of Heavy Vehicle Systems, Accepted, 2015.
,
"Automated Topology Optimization of Hybrid Electric Vehicle Powertrains", International Journal of Electric and Hybrid Vehicles, 2015.
,
"Design and Evaluation of a Predictive Powertrain Control System for a PHEV to Improve Fuel Economy and Emissions", IMechE Part D: Journal of Automobile Engineering, vol. 229, pp. 624-640, 2015.
,
"Design and Evaluation of an Observer-based Disturbance Rejection Controller for Electric Power Steering Systems", IMechE Part D: Journal of Automobile Engineering, Accepted, 2015.
,
"Ecological Adaptive Cruise Controller for Hybrid Electric Vehicles Using Nonlinear Model Predictive Control", IEEE Intelligent Transportation Systems Transactions, 2015.
,
"Experimental Validation of a Volumetric Planetary Rover Wheel/Soil Interaction Model", ASME Journal of Computational and Nonlinear Dynamics, vol. 10, pp. 1-12, 2015.
,
"Foot Contact Modelling within Human Gait Simulations: from Spring-Damper to Hyper-Volumetric Models", Multibody Sys. Dyn., Accepted, 2015.
,
"Multi-objective component sizing of a power-split plug-in hybrid electric vehicle powertrain combined with optimal power management", Engineering and Optimization, 2015.
,
"Parameter Estimation of an Electrochemistry-based- Lithium-ion Battery Model", Journal of Power Sources, 2015.
,
"Real-time Predictive Control Strategy for a Plug-in Hybrid Electric Powertrain", Mechatronics, 2015.
,
"Reduction of Multibody Dynamic Models in Automotive Systems using the Proper Orthogonal Decomposition", ASME Journal of Computational and Nonlinear Dynamics, vol. 10, pp. 1-8, 2015.
,
"Steering Disturbance Rejection using a Physics-based Neuro-musculoskeletal Driver Model", Vehicle System Dynamics, 2015.
,
"System dynamic modelling and simulation of hydrodynamic machines", Mathematical and Computer Modelling of Dynamical Systems, pp. 1-33, Aug 2015.
,
"The Effects of Oar-Shaft Stiffness and Length on Rowing Biomechanics", Journal of Sports Engineering & Technology, vol. 229, issue 4, 2015.
,
2014
"A comparative analysis of route-based power management strategies for real-time application in plug-in hybrid electric vehicles", American Control Conference, 2014.
,
"CPG-Like Motor Control Model for Periodic Arm Motion", World Congress of Biomechanics, Boston, MA, 2014.
,
"Definition of Muscle Synergies for Automobile Steering", International Shoulder Group meeting, Waterloo, Canada, 2014.
,
"Evaluation of a Musculoskeletal Arm Model for Automobile Drivers using Electromyography", 10th Conference of the International Shoulder Group, {July 13-15}, Waterloo, Ontario, 2014.
,
"A Mechanistic Multibody Model for Simulating the Dynamics of a Vertical Piano Action", ASME Journal of Computational and Nonlinear Dynamics, vol. 9, pp. 1-10, Published, 2014.
,
"A Study of Volumetric Contact Modelling Approaches in Rigid Tire Simulation for Planetary Rover Application", Int. J. Vehicle Design, vol. 64, pp. 262-279, 2014.
,
"A survey of mathematics-based equivalent-circuit and electrochemical battery models for hybrid and electric vehicle simulation", J. Power Sources, vol. 256, pp. 410-423, 2014.
seaman2014.pdf (1.05 MB) ,

"A Volumetric Contact Model to Study the Effect of Lane Friction and the Radii of Gyration on the Hook Shot in Indoor Bowling", Procedia Engineering, vol. 72, pp. 429 - 434, 2014.
,
"Forward Dynamic Optimization of Human Gait Simulations: A Global Parameterization Approach", ASME Journal of Computational and Nonlinear Dynamics, vol. 9, pp. 1-11, 2014.
,
"Forward Dynamic Optimization of Human Gait Simulations: A Global Parameterization Approach", ASME J. Comp. Nonlinear Dyn, 2014.
,
"Graph-theoretic Sensitivity Analysis of Dynamic Multibody Systems", ASME Journal of Computational and Nonlinear Dynamics, vol. 9, pp. 1-8, 2014.
,
"Intelligent power management of plugin hybrid electric vehicles , part I: real-time optimum SOC trajectory builder", International Journal of Electric and Hybrid Vehicles, vol. 6, 2014.
,
"Intelligent power management of plugin hybrid electric vehicles, part II: real-time route based power management", International Journal of Electric and Hybrid Vehicles, vol. 6, 2014.
,
"On the Grobner Basis Triangularization of Constraint Equations in Natural Coordinates", Multibody System Dynamics, vol. 31, pp. 371-392, 2014.
,
"Parameter Identification for Multibody Systems Expressed in Differential-Algebraic Form", Multibody Sys. Dyn, vol. 31, pp. 393-403, Published, 2014.
,
"Physics-based Models, Sensitivity Analysis and Optimization of Automotive Batteries", SAE International Journal of Passenger Cars: Electronic and Electrical Systems, vol. 7, pp. 18-27, 2014.
,
Dynamics of Gyroelastic Continua, Waterloo, ON, Canada, University of Waterloo, 2014.
,
The Effects of Oar-Shaft Stiffness and Length on Rowing Biomechanics: University of Western Ontario, 2014.
,
2013
"Symbolic Sensitivity Analysis of Multibody Systems", Multibody Dynamics: Computational Methods and Applications: Springer Netherlands, pp. 123-146, 2013.
,
"A Three-Dimensional Musculoskeletal Driver Model to Study Steering Tasks", ASME Design Engineering Technical Conference, Portland, DETC2013-13101, 2013.
,
"Central Pattern Generator (CPG) in the Control of Periodic Elbow Flexion/Extension", Ontario Biomechanics Conference (OBC), Barrie, Canada, 2013.
,
"Comparison of Cylindrical Wrapping Geometries to Via Points for Modelling Muscle Paths in the Estimation of Sit-to-Stand Muscle Forces", ASME Design Engineering Technical Conference, Portland, DETC2013-13437, 2013.
,
"Efficient Hyper-Volumetric Contact Dynamic Modelling of the Foot within Human Gait Simulations", ASME Design Engineering Technical Conference, Portland, DETC2013-13446, 2013.
,
"Experimental Validation of a Volumetric Planetary Rover Wheel/Soil Interaction Model", ASME 15th International Conference on Advanced Vehicle Technologies, Portland, DETC 2013-13486, 2013.
Link to PDF (2.53 MB) ,

"A Battery Hardware-in-the-Loop Setup for Concurrent Design and Evaluation of Real-Time Optimal HEV Power Management Controllers", Int. J. Elec. Hybrid Vehicles, vol. 5, pp. 177-194, 2013.
,
"Development of an Advanced Fuzzy Active Steering Controller and a Novel Method to Tune the Fuzzy Controller", SAE Int. J. Passeng. Cars Electron. Electr. Syst, vol. 6, pp. 241-254, 2013.
,
"Development of an Advanced Torque Vectoring Control System for an Electric Vehicle with In-Wheel Motors using Soft Computing Techniques", SAE Int. J. Alt. Power, vol. 2, pp. 261-278, 2013.
,
"Development of an Integrated Control Strategy Consisting of an Advanced Torque Vectoring Controller and a Genetic Fuzzy Active Steering Controller", SAE Int. J. Passeng. Cars Electron. Electr. Syst, vol. 6, pp. 222-240, 2013.
,
"Galerkin Approximations with a Moving Boundary for State Dependent Delay Differential Equations", ASME Journal of Dynamics Systems, Measurement, and Control, vol. 135, pp. 1-6, 2013.
,
"Galerkin Approximations with a Moving Boundary for State Dependent Delay Differential Equations", to appear in ASME J. Dyn. Sys. Meas. Control., 2013.
,
"Optimal Control and Forward Dynamics of Human Periodic Motions Using Fourier Series for Muscle Excitation Patterns", ASME J. Comp. Nonlinear Dyn, vol. 9, pp. 1-7, Published, 2013.
,
"Reduction of a Vehicle Multibody Dynamic Model using Homotopy Optimization", Archive Mech. Eng, pp. 23-35, Published, 2013.
,
"Volumetric Modelling and Experimental Validation of Normal Contact Dynamic Forces", ASME J. Comp. Non. Dyn, vol. 8, pp. 021006:1-8, 2013.
,
2012
"Parameter Identification in Dynamic Systems using the Homotopy Optimization Approach", Identification for Automotive Systems, vol. 418, New York, Springer-Verlag, pp. 129-145, 2012.
,
"A Mechanistic Model of Compression Hysteresis in Compliant Interfaces in Multibody Dynamic Simulation of a Piano Action Mechanism", Int. Conf. Multibody Sys. Dyn, Stuttgart, Germany, 2012.
,
"Comparison of Optical and Inertial Tracking of Full Golf Swings", Procedia Engineering, vol. 34: Int. Sports Eng. Assoc, pp. 461-466, 2012.
,
"Development of a Fuzzy Slip Control System for Electric Vehicles with In-wheel Motors", SAE Congress, Detroit, USA, 2012.
,
"Development of a Path-following and a Speed Control Driver Model for an Electric Vehicle", SAE Congress, Detroit, USA, 2012.
,
"Dynamic Optimization of Human Forearm Simulations Parameterizing the Muscle Excitations", Proc. Can. Soc. Biomech, Vancouver, B.C, 2012.
,
"Friction Modelling and Validation for a Volumetric Contact Dynamics Model", Int. Conf. Multibody Sys. Dyn, Stuttgart, Germany, 2012.
,
"Graph-theoretic Modelling of an Automotive Torque Converter", Mathematical Modelling (MathMOD 2012), vol. 7, Part 1, Austria, pp. 1219-1224, 2012.
,
"Identification of Volumetric Wheel/Soil Interaction Model Parameters from Planetary Rover Experiments", Int. Soc. Terrain-Vehicle Sys., South Africa, 2012.
,
"MapleSim in Engineering Research", 3rd Annual MapleSim Academic Summer Workshop, McMaster University, Hamilton, 19 July, 2012.
,
"Mathematics-based Modelling of Series-Hybrid Electric Vehicles", SAE Webinar to 234 automotive engineers, 27 Sept., 2012.
,
"Modeling Torque Converter Characteristics in Automatic Drivelines: Lock-up Clutch and Engine Braking Simulation", ASME Int. Conf. Adv. Vehicle Tech, Chicago, USA, Paper DETC2012-70222, 2012.
,
"On Real-time Optimal Control of a Series Hybrid Electric Vehicle with an Ultra-Capacitor", Amer. Control Conf., Montreal, Canada, 2012.
,
"On the Grobner Basis Triangularization of Constraint Equations in Natural Coordinates", Int. Conf. Multibody Sys. Dyn, Stuttgart, Germany, 2012.
,
"Parameter Identification for Multibody Systems Governed by DAEs", Int. Conf. Multibody Sys. Dyn, Stuttgart, Germany, 2012.
,
"Parametric Importance Analysis and Design Optimization of a Torque Converter Model using Sensitivity Information", SAE World Congress, Detroit, USA, 2012.
,
"Predictive Power Management Strategy for a PHEV Based on Different Levels of Trip Information", IFAC Workshop on Engine and Powertrain Control Simulation and Modeling, Paris, France, 2012.
,
"Reduction of a Vehicle Multibody Dynamic Model using Homotopy Optimization", Int. Conf. Multibody Sys. Dyn, Stuttgart, Germany, 2012.
,
"Simulation of the Three-dimensional Motion of a Cricket Ball using a Volumetric Contact Model", Procedia Engineering, vol. 34: Int. Sports Eng. Assoc., pp. 676-681, 2012.
,
Study of Human Steering Tasks using a Neuromuscular Driver Model, Seoul, Korea, Adv. Vehicle Control, 2012.
,
"Traction-motor power ratio and speed trajectory optimization for power split Plug-in Hybrid Electric Vehicles using route information", International Mechanical Engineering Congress and Exposition, ASME, 2012.
,
"An optimal power management strategy for power split plug-in hybrid electric vehicles", Int. J. Vehicle Design, vol. 60, issue 3/4, pp. 286-304, 2012.
Link to PDF (812.71 KB) ,

"Design and Evaluation of a Predictive Powertrain Control System for a PHEV to Improve Fuel Economy and Emissions", submitted to Int. J. Vehicle Des., 2012.
,
"Design and Evaluation of a Real-time Fuel optimal Control System for Series Hybrid Electric Vehicles", Int. J. Elec. Hybrid Vehicles, vol. 4, pp. 260-288, 2012.
,
"Development of a Fuzzy Slip Control System for Electric Vehicles with In-wheel Motors", SAE International Journal of Alternative Powertrains, vol. 1, pp. 46-64, 2012.
,
"Development of a Path-following and a Speed Control Driver Model for an Electric Vehicle", SAE Int. J. Passenger Cars Electron. Electr. Sys., vol. 5, pp. 100-113, 2012.
,
"Driving Simulator with Double-wishbone Suspension using Efficient Block-triangularized Kinematic Equations", Multibody Sys. Dyn., vol. 28, pp. 331-347, 2012.
,
"Foot Placement and Balance in 3D", ASME J. Comp. Non. Dyn., vol. 7, pp. 021015:1-14, 2012.
,
"Math-based Torque Converter Modelling to Evaluate Damping Characteristics and Reverse Flow Mode", International Journal of Vehicle Systems Modelling and Testing, vol. 9, pp. 36-55, 2012.
,
"Modeling of Contact and Stiction in Electrostatic Micro-Cantilever Actuators", ASME J. Nano. Eng. Med, vol. 3, pp. 1-8, 2012.
,
"Nonlinear Parameter Identification in Multibody Systems using Homotopy Continuation", ASME J. Comp. Non. Dyn., vol. 7, pp. 011012:1-8, 2012.
,
"Nonsmooth Modeling of Vibro-Impacting Euler-Bernoulli Beam", Advances in Acoustics and Vibration, vol. 12, pp. 268595: 1-9, 2012.
,
"On the Grobner Basis Triangularization of Constraint Equations in Natural Coordinates", submitted to Multibody Sys. Dyn., 2012.
,
"Optimal Power Management Strategy for Power Split Plug-in Hybrid Electric Vehicles", Int. J. Vehicle Design, vol. 60, pp. 286-304, 2012.
,
"Parametric Importance Analysis and Design Optimization of a Torque Converter Model using Sensitivity Information", SAE Int. J. Passenger Cars Mech. Sys, vol. 5, pp. 621-638, 2012.
,
"Simplification and Order Reduction of Lithium-ion Battery Model based on Porous-Electrode Theory", Journal of Power Sources, vol. 198, pp. 329-337, 2012.
,
"Single-shooting Homotopy Method for Parameter Identification in dynamical Systems", Phys. Review E., vol. 85, pp. 036201:1-5, 2012.
,
"Using Grobner Bases to Generate Efficient Kinematic Solutions for the Dynamic Simulation of Multi-loop Mechanisms", Mech. Mach. Theory, vol. 52, pp. 144-157, 2012.
,
"Volumetric Modeling and Experimental Validation of Normal Contact Dynamic Forces", ASME Journal of Computational and Nonlinear Dynamics, vol. 8, pp. 021006:1-8, 2012.
Link to PDF (994.38 KB) ,

2011
"Advanced Machine Design with Symbolic Modeling and Simulation Technology", ASME Webinar to 200 mechanical engineers, 21 June, 2011.
,
"Advanced Physical Modelling Tackles the Complexity of Modern Engineering", ASEEWebinar to 50 engineering educators, 7 Dec., 2011.
,
"Development of a High-Fidelity Series- Hybrid Electric Vehicle Model using a Mathematics-Based Approach", Proc. JSAE Congress, 2011.
,
"Driving Simulator with Double-Wishbone Suspension using Block-Triangularized Kinematic Equations for Real-Time Performance", Proc. Multibody Dyn., 2011.
,
"Efficient Solution of Kinematics for Multi-loop Mechanisms using Grobner Bases", Proc. 13th World Contress Mech. Mach. Sci., Mexico, 2011.
,
"Flexible Planetary Rover Tire Model with Volumetric Wheel/Soil Interface", Proc. Int. Soc. Terrain-Vehicle Sys, Virginia, USA, 2011.
,
"Forward Dynamic Human Gait Simulation using a SLIP Target Model", Procedia IUTAM, vol. 2, pp. 142-157, 2011.
,
"Graph-Theoretic Sensitivity Analysis of Multibody Systems", Proc. Multibody Dyn., 2011.
,
"Math-based Modeling and Parametric Sensitivity Analysis of Torque Converter Performance Characteristics", SAE Congress, 2011.
,
"Mathematical Modeling and Symbolic Sensitivity Analysis of Ni-MH Batteries", SAE Congress, 2011.
,
"Modelling Human Foot Placement in 2D and 3D", Proc. Int. Soc. Biomech, Belgium, 2011.
,
"Nonlinear Parameter Identification in Multibody Systems using Homotopy Continuation", Proc. Multibody Dyn., Belgium, 2011.
,
"Optimal Control and Forward Dynamics of Periodic Forearm Motions using Fourier Series for Muscle Excitations", Proc. Amer. Soc. Biomech, 2011.
,
"Optimal Disturbance Rejection Control Design for Electric Power Steering Systems", IEEE Conf. Decision Control, Orlando, USA, 2011.
,
"Physical Models of Automotive Batteries for EV and HEV Applications", SAE Webinar to 300 automotive engineers, 29 Nov., 2011.
,
"Volumetric Contact Dynamics Models and Experimental Validation of Normal Forces for Simple Geometries", Proc. ASME IDETC, 2011.
,
"Dynamic Modeling of Electrochemical Systems using Linear Graph Theory", J. Power Sources, vol. 196, pp. 10442-10454, 2011.
,
"Modelling MEMS Resonators Past Pull-in", ASME J. Comp. Non. Dyn., vol. 6, pp. 031008:1-7, 2011.
,
"Parameter Identification in Dynamic Systems using the Homotopy Optimization Approach", Multibody Sys. Dyn., vol. 26, pp. 411-424, 2011.
,
"Parameter Identification in Multibody Systems using Lie Series Solutions and Symbolic Computation", J. Comp. Non. Dyn, vol. 6, pp. 041011:1-9, 2011.
,
"Triangularization Kinematic Constraint Equations using Grobner Bases for Real-time Dynamic Simulation", Multibody System Dynamics, vol. 25, pp. 335-356, 2011.
,
2010
"3D Dynamic Modelling and Simulation of a Golf Drive", 8th ISEA, Procedia Engineering 2, Austria, pp. 3243-3248, 2010.
,
"A Model for Forward Dynamic Simulation of Rapid Tapping Motion of Index Finger", Proc. Canadian Soc. Biomechanics, Kingston, 2010.
,
"A Two-Dimensional Nonlinear Volumetric Foot Contact Model", Proc. ASME IMecE, Vancouver, 2010.
,
"A Volumetric Contact Model for Off-road Tire/Soil Dynamic Simulation", Proc. ASME IDETC, Montreal, 2010.
,
"Advanced Golf Clubhead Design", ASME ME Today on-line magazine, vol. 11, Jan., 2010.
,
"Computationally Efficient Partitioned Dynamic Simulation of Multibody Systems using Implicit Time Integrators", Proc. Euromech Colloquium 515: Adv. Appl. Persp., Bulgaria, 2010.
,
"Effective Modelling of Sticking Motions in Vibro- Impacting Continuous Systems", Proc. ASME ImecE, Vancouver, 2010.
,
"High Fidelity Physical Models of Automotive Batteries", IEEE Spectrum Webinar to 170 electrical engineers, 22 Sept., 2010.
,
"Mapping Spring Forces onto Anthropomorphic Legs", Proc.1st IMSD, Finland, 2010.
,
"Mathematics-based Modelling of a Series Hybrid Electric Vehicle", 5th Asian Conf. Multibody Dyn., Japan, 2010.
,
"Parameter Identification in Dynamic Systems using the Homotopy Optimization Approach", Proc. Workshop Ident. Auto. Sys., Austria, 2010.
,
"Player Testing and Statistical Analysis of Two Different Methods for Spine-aligning Golf Club Shafts", 8th ISEA, , Procedia Engineering 2, Austria, pp. 3355-3360, 2010.
,
"Symbolic Formulation of Multibody Dynamic Equations for Wheeled Vehicle Systems on Three-Dimensional Roads", Proc. SAE World Congress, Detroit, 2010.
,
"Symbolic Math-based Battery Modelling for Electric Vehicle Simulation", Proc. ASME IDETC, Montreal, 2010.
,
"Triangularizing Kinematic Constraint Equations using Grobner Bases for Real-time Dynamic Simulation", Proc. 1st IMSD, Finland, 2010.
,
"Volumetric Contact Models and Experimental Validation", Proc. 1st IMSD, Finland, 2010.
,
"Modelling Impacts Between a Continuous System and a Rigid Obstacle Using Coefficient of Restitution", ASME J. Appl. Mech., vol. 77, pp. 021008:1-7, 2010.
,
"Partitioned Dynamic Simulation of Multibody Systems", ASME J. Comp. Non. Dyn., vol. 5, pp. 031007:1-7, 2010.
,
"Symbolic Formulation of Multibody Dynamic Equations for Wheeled Vehicle Systems on 3D Roads", SAE Int. J. Mater. Manuf., vol. 3, pp. 454-467, 2010.
,
2009
"Multi-step Forward Dynamic Gait Simulation", Multibody Dynamics, vol. 12 of Computational Methods in Applied Sciences: Springer, 2009.
Link to PDF (1.08 MB) ,

"A Volumetric Contact Model Implemented using Polynomial Geometry", Proc. Multibody Dynamics, Poland, 2009.
,
"Comparison of Golf Ball/Driver Impact Models with Mechanical Impedance Matching Theory", Proc. ASME SMASIS, California, 2009.
,
"Design of an Improved Ice Hockey Stick Test Machine", Proc. CANCAM, Halifax, 2009.
,
"Dynamic Model of a Vertical Piano Action Mechanism", Proc. ASME DETC, California, 2009.
,
"Foot Placement and Balance in 3D", Proc. Dynamic Walking Conference, Vancouver, 2009, 2009.
,
"Integrated Stability Control System for Electric Vehicles with In-wheel Motors using Soft Computing Techniques", SAE 2009 World Congress, Detroit, 2009.
,
"Mechatronic Modelling and Real-time Simulation of an Electric Vehicle with In-wheel Motors", Proc. CANCAM, Halifax, 2009.
,
"Symbolic Modeling of Wheeled Vehicles on 3D Roads", Proc. Multibody Dynamics, Poland, 2009.
,
"The Effect of Pulsed Active Steering on the Dynamic Roll Response of a Passenger Vehicle", Proc. ASME WAM, Florida, 2009.
,
"A Survey on Stability Enhancement Strategies for Articulated Steer Vehicles", Int. J. Heavy Veh. Sys., vol. 16, pp. 26-48, 2009.
,
"Design of an Advanced Traction Controller for an Electric Vehicle Equipped with Four Direct Driven In-Wheel Motors", SAE International Journal of Passenger Cars - Electronic and Electrical Systems, vol. 1, pp. 211-219, 2009.
,
"Human Foot Placement and Balance in the Sagittal Plane", ASME J. Biomech. Eng, vol. 131, pp. 121001:1-7, 2009.
Link to PDF (163.43 KB) ,

"Integrated Stability Control System for Electric Vehicles with In-wheel Motors using Soft Computing Techniques", SAE Int. J. Passeng. Cars – Electron. Electr. Syst., vol. 2, pp. 109-119, 2009.
,
"Modeling impacts between a continuous system and a rigid obstacle using coefficient of restitution", ASME Journal of Applied Mechanics, vol. 77, pp. 1-7, 2009.
,
"Modelling the Dynamics of a Compliant Piano Action Mechanism Impacting an Elastic Stiff String", J. Acoust. Soc. Amer., vol. 125, pp. 4034-4042, 2009.
,
"Modelling the Dynamics of a Vibrating String with a Distributed Unilateral Constraint: Application to the Sitar", J. Acoust. Soc. Amer., vol. 125, pp. 3673-3682, 2009.
,
"Shape Optimization of Golf Clubface using Finite Element Impact Models", Sports Eng., vol. 12, pp. 77-86, 2009.
,
2008
"Design of an Advanced Traction Controller for an Electric Vehicle Equipped with Four Direct Driven In-Wheel Motors", Vehicle Dynamics and Simulation and Tire and Wheel Technology: SAE International, 2008.
,
"A Vibrating Sitar String: Modeling the 3D Dynamics of a Plucked String Impacting a Spatial Obstacle with Friction", 2nd International ASA-EAA joint conference, Paris, Journal of the Acoustical Society of America 123:3380, 2008.
,
"Comparison of Impulse-Momentum and Finite Element Models for Impact between Golf Ball and Clubhead", World Sci. Cong. Golf, Phoenix, 2008.
,
"Considering the Effect of Hammer Shank Flexibility using a Multibody Dynamic Simulation Model of a Piano Action Mechanism with String Contact", 2nd International ASA-EAA joint conference, Paris, Journal of the Acoustical Society of America 123:3660, 2008.
,
"Design of an Advanced Traction Controller for an Electric Vehicle Equipped with Four Direct Driven In-Wheel Motors", Proc. SAE World Congress, Detroit, 2008.
,
"Design of an Ice Hockey Test Machine", Int. Sports Eng. Assoc, France, 2008.
,
"Evaluation of a Human Foot Placement Model", Proc. N.A. Conf. Biomech, Ann Arbor, 2008.
,
"Modelling MEMS Resonators Past Pull-In", ASME IMECE, Boston, 2008.
,
"Modelling MEMS Resonators Past Pull-in", Engineering Science and Mechanics Conference, Virginia, 2008.
,
"Motorized Shoulder Belt Tensioning: Modeling and Performance for a Diverse Occupant Population", Proc. SAE World Congress, Detroit, 2008.
,
"Real-Time Hardware-in-the-Loop Dynamic Simulation of Multibody Mechatronic Systems", 4th Asian Conference on Multibody Dynamics, Korea, 2008.
,
"Shape Optimization of Golf Clubface using Finite Element Impact Models", Int. Sports Eng. Assoc., France, 2008.
,
"Using Volume Metrics as an Alternative to Penalty or Finite Element Methods for Modelling Contacts", ECCOMAS, Italy, 2008.
,
"A Review of Automated Design Synthesis Approaches for Virtual Development of Ground Vehicle Suspensions", SAE Trans. J. Passenger Cars - Mech. Sys., vol. 116, pp. 867-879, 2008.
,
"Complete and Scalable Multi-Robot Roadmap Coordination Planning", IEEE Trans. Robotics, vol. 24, pp. 283-292, 2008.
Link to PDF (722.78 KB) ,

"Design of an Advanced Traction Controller for an Electric Vehicle Equipped with Four Direct Driven In-Wheel Motors", SAE Int. J. Passeng. Cars –Electron. Electr. Syst., vol. 1, pp. 211-219, 2008.
,
"Dynamic Modeling and Experimental Testing of a Piano Action Mechanism with a Flexible Hammer Shank", ASME J. Comp. Non. Dyn., vol. 3, 2008.
,
"Reply to “Who Owns Mechatronics”", ASME Mechanical Engineering Magazine, October, 2008.
,
"Unified Modelling and Real-Time Simulation of an Electric Vehicle", Int. J. Veh. Auto. Sys., vol. 6, pp. 288-307, 2008.
,
"Using Graph Theory and Symbolic Computing to Generate Efficient Models for Multibody Vehicle Dynamics", IMechE J. Multi-body Dynamics, vol. 222, pp. 339-352, 2008.
,
"Using Linear Graph Theory and the Principle of Orthogonality to Model Multibody, Multi-Domain Systems", Adv. Eng. Infor., vol. 22, pp. 147-160, 2008.
,
2007
"A Multibody Dynamic Model of a Flexible Piano Action Mechanism Impacting a Flexible String", Proc. ICTACEM, Kharagpur, India, 2007.
,
"A Review of Automated Design Synthesis Approaches for Virtual Development of Ground Vehicle Suspensions", accepted for SAE 2007 World Congress, 2007.
,
"Automated Selection of Modelling Coordinates for Multibody System Dynamics", accepted for 12th IFToMM World Congress, France, June, 2007.
,
"Dynamic Analysis of Micromirrors with Staggered Vertical Combdrives Actuation", Proc. CANCAM, Toronto, 2007.
,
"Dynamic Modeling and Experimental Testing of a Piano Action Mechanism with a Flexible Hammer Shank", Proc. ASME IDETC, Las Vegas, 2007.
,
"Dynamic Modelling and Simulation of the Centaur Skid-steered Allterrain Vehicle", Proc. CANCAM, Toronto, 2007.
,
"Flexible Beam Impacting a String with Nonlinear Contact Law", Proc. CANCAM, Toronto, 2007.
,
"Free Vibration Response of a Plucked String Impacting Against a Spatial Obstacle", Proc. ICTACEM, Kharagpur, India, 2007.
,
"Inverse Dynamics of the Golf Swing using Graph-Theoretic Modelling", Proc. CANCAM, Toronto, 2007.
,
"Modeling Biomechanics of Volunteers Subject to Loading by a Motorized Shoulder Belt Tensioner", Proc. Int. Res. Coun. Biomech. Injury (IRCOBI), Maastricht, Netherlands, 2007.
,
"On Implementing a Bristle Friction Model in a Contact Model Based on Volumetric Properties", Proc. Multibody Dynamics Thematic Conference, Milan, Italy, 2007.
,
"On the Implementation of Coulomb Friction in a Volumetric-Based Model for Contact Dynamics", Proc. ASME IDETC, Las Vegas, Nevada, 2007.
,
"Optimization of a Vehicle Suspension Using a Genetic Algorithm Method", Proc. CANCAM, Toronto, 2007.
,
"Application of Optimisation Algorithms and Multibody Dynamics to Ground Vehicle Suspension Design", Int. J. Heavy Veh. Sys., vol. 14, pp. 158-192, 2007.
,
"Application of SQP and Dynamic Model Tracking to the Identification of the Critical Speed of Rail Vehicles", Int. J. Heavy Veh. Sys, vol. 14, pp. 193-212, 2007.
,
"Automated Kinematic Synthesis of Planar Mechanisms with Revolute Joints", Mech.-Based Des. Struct. Mach., vol. 35, pp. 405-445, 2007.
,
"Computerized Generation of Motion Equations Using Variational Graph-theoretic Methods", Appl. Math. Comp., vol. 192, pp. 135-156, 2007.
,
"Generating Computationally Efficient Vehicle Dynamic Models with DynaFlexPro", Automotive Design Line, pp. 14 pages, June, 2007.
,
"Robust State Feedback Stabilization of Articulated Steer Vehicles", Veh. Sys. Dyn, vol. 45, pp. 249-275, 2007.
,
"Robust Variable Structure Control for Stabilization of Articulated Steer Vehicles by Torque Vectoring", Int. J. Heavy Veh. Sys., vol. 14, pp. 331-354, 2007.
,
"Selection of Modeling Coordinates for Forward Dynamic Multibody Simulations", Multibody Syst. Dyn., vol. 18, pp. 277-297, 2007.
,
"Stabilization of a Dynamic Walking Gait Simulation", ASME J. Comp. Non. Dyn, vol. 2, pp. 65-72, 2007.
,
"The Effects of Locking Differentials on the Snaking Mode of Articulated Steer Vehicles", Int. J. Veh. Sys. Model. Test, vol. 2, pp. 101-127, 2007.
,
2006
"An Active Control Device Based on Differential Braking for Articulated Steer Vehicles", Proc. SAE 2006 Comm. Veh. Eng. Congress, 2006.
,
"Automated Selection of Modelling Coordinates in Multibody Dynamics", Proc. CSME Forum, Alberta, 2006.
,
"Complete and Scalable Multi-Robot Planning in Tunnel Environments", Proc. 1st IFAC Work. Multivehicle Sys, Brazil, 2006.
,
"DynaFlexPro: A Maple Package for Multibody System Dynamics", Proc. Maple Summer Work, Waterloo, Canada, 2006.
,
"Dynamic Modelling of a Piano Action Mechanism with a Flexible Hammer Shank", Proc. CSME Forum, Alberta, 2006.
,
"Implementation of a Variable Duty Factor Controller on an Axi-Symmetric Six-Legged Walking Robot", Proc. CSME Forum, Alberta, 2006.
,
"Infinite Step Forward Dynamic Gait Simulation", Proc. 14th Conf. Can. Soc. Biomech, Waterloo, Canada, 2006.
,
"Propulsion System for Swimming Micro-Robots", Proc. ASME 2006 Summer Bioeng. Conf. Florida, Florida, USA, 2006.
,
"Robust Stabilization of Articulated Steer Vehicles by Differential Braking", Proc. CSME Forum, Alberta, 2006.
,
"Small Angle Analysis of the Dynamically Tuned Gyro", Proc. 7th Dyn. Cont. Sys. Struct. Space, London, England, pp. 395-408, 2006.
,
"Using Graph Theory and Symbolic Computing to Generate Efficient Models for Vehicle Dynamics", Proc. CSME Forum, Alberta, 2006.
,
"Dynamic Modelling and Experimental Testing of a Piano Action Mechanism", ASME J. Comp. Non. Dyn., vol. 1, pp. 47-55, 2006.
,
"Modelling Multibody Systems with Indirect Coordinates", Comp. Meth. Appl. Mech. Eng, vol. 195, pp. 6942-6957, 2006.
,
"Stability Analysis of a Dynamically Tuned Gyroscope", J. Guid. Cont. Dyn, vol. 29, pp. 965-969, 2006.
,
2005
"Implicit Reduced Involutive Forms and Their Application to Engineering Multibody Systems", Lecture Notes in Computer Science, vol. 3519: Springer-Verlag, pp. 31-43, 2005.
,
"Unified Modelling Theories for the Dynamics of Multidisciplinary Multibody Systems", Advances in Computational Multibody Systems: Springer-Verlag, pp. 129-158, 2005.
Link to PDF (749.47 KB) ,

"A Contact Modeling Method Based on Volumetric Properties", Proc. ASME Des. Eng. Tech. Conf, California, Sept., 2005.
,
"Dynamic Modelling and Experimental Testing of a Piano Action Mechanism", Proc. ASME Des. Eng. Tech. Conf, California, 2005.
,
"Initial Locomotion Study of an Omni-Directional Rover", Proc. ASME Des. Eng. Tech. Conf., California, 2005.
,
"Localization of Multiple Robots with Simple Sensors", Proc. Int. Conf. Mechatronics Automation, Niagara Falls, Canada, pp. 671-676, Aug., 2005.
,
"Simulation of Contact Between Complexly Shaped Objects", Proc. Int. Symp. AI Rob. Auto. Space, Munich, Germany, Sept., 2005.
,
"Stabilization and Energy Optimization of a Dynamic Walking Gait Simulation", Proc. ASME Des. Eng. Tech. Conf., California, 2005.
,
"Symbolic Modeling of Vehicle Dynamics: A Maple Implementation", Proc. Maple Conference, pp. 45-62, July, 2005.
,
"A Design Methodology for Mechatronic Vehicles: Application of MDO, Multibody Dynamics, and Genetic Algorithms", Veh. Sys. Dyn., vol. 43, pp. 697-733, 2005.
,
"Automated Type Synthesis of Planar Mechanisms using Numeric Optimization with Genetic Algorithms", ASME J. Mech. Des., vol. 126, pp. 910-916, 2005.
Link to PDF (120.2 KB) ,

"Forming Equivalent Subsystem Components to Facilitate the Modelling of Mechatronic Multibody Systems", Multibody Sys. Dyn., vol. 14, pp. 81-109, 2005.
,
"Multidisciplinary Design Optimization of Mechatronic Vehicles with Active Suspensions", J. Sound Vib., vol. 283, pp. 217-241, 2005.
Link to PDF (410.98 KB) ,

"Multidisciplinary Optimization of Multibody Systems with Application to the Design of Rail Vehicles", Multibody Sys. Dyn., vol. 14, pp. 111-135, 2005.
,
"Off-road Lateral Stability Analysis of an Articulated Steer Vehicle with a Rear-mounted Load", Int. J. Veh. Sys. Model. Test., vol. 1, pp. 106-130, 2005.
,
"Optimization of Curving Performance of Rail Vehicles", Veh. Sys. Dyn., vol. 43, pp. 895-923, 2005.
,
2004
"Automated Kinematic Synthesis of Planar Mechanisms Using an Evolutionary Approach", CSME Forum, University of Western Ontario, London, pp. 362-371, June, 2004.
,
"Formulation of Symbolic Motion Equations for Electromechanical Multibody Systems", Maple Summer Workshop 2004, Waterloo, Ontario, July, 2004.
,
"Friction Compensation of Harmonic Drive Actuators", 6th International Conference on Dynamics and Control of Systems and Structures in Space, Liguria, Italy, pp. 683-692, July, 2004.
,
"Generating Efficient Equations for Dynamic Simulation of Electromechanical Multibody Systems using Maple, Subsystem Models, and Linear Graph Theory", Maple Summer Workshop 2004, Waterloo, Ontario, July, 2004.
,
"Lateral Stability Analysis and Parameter Estimation of Articulated Frame Steer Vehicles", CSME Forum, University of Western Ontario, London, pp. 962-971, June, 2004.
,
"Mechatronic Vehicle Design via Multidisciplinary Optimization", CSME Forum, University of Western Ontario, London, pp. 504-513, June, 2004.
,
"Modelling of Mechatronic Multibody Systems using Subsystem Models and Linear Graph Theory", Euromech 452: Advances in Simulation Techniques for Applied Dynamics, Halle, Germany, March, 2004.
,
"Simulation of Contact in Multibody Dynamics using Simulink", 8th ESA Workshop on Advanced Space Technologies for Robotics and Automation, Noordwijk, The Netherlands, November, 2004.
,
"Type Synthesis of Planar Mechanisms using Topology as an Optimization Design Variable", accepted for 11th World Congress in Mechanism and Machine Science, Tianjin, China, April, 2004.
,
"A Comparison of Different Methods for Modelling Multibody Systems with Electrical Drives", Multibody System Dynamics, vol. 12, pp. 209-250, 2004.
,
"A Regularized Contact Model with Asymmetric Damping and Dwell-Time Dependent Friction", Multibody System Dynamics, vol. 11, pp. 209-233, 2004.
Link to PDF (252.18 KB) ,

"Dynamic Modeling and Stability Analysis of Articulated Frame Steer Vehicles", Int. J. Heavy Veh. Sys., vol. 12, pp. 28-59, 2004.
Link to PDF (389.28 KB) ,

"Dynamic Modelling of Mechatronic Multibody Systems with Symbolic Computing and Linear Graph Theory", Mathematical and Computer Modelling of Dynamical Systems, vol. 10, pp. 1-23, 2004.
Link to PDF (388.06 KB) ,

2003
"Virtual Prototyping of Multibody Systems with Linear Graph Theory and Symbolic Computing", Virtual Nonlinear Multibody Systems: Kluwer Academic, pp. 37-56, 2003.
,
"Application of Multidisciplinary Design Optimization to the Design of Ground Vehicles with Active Suspensions", Proc. EuroMech Colloquium on Computer-Aided Optimization of Mechanical Systems, Erlangen, Germany, Feb., 2003.
,
"Dynamic Modelling of Mechatronic Multibody Systems with Symbolic Computing and Linear Graph Theory", CD-ROM Proceedings of 4th Mathmod, Vienna, Austria, pp. 854-863, Feb., 2003.
,
"Kinematic Model of a Piano Action Mechanism", 19th Canadian Congress of Applied Mechanics, Calgary, Alberta, June, 2003.
,
"Design Optimization of Rail Vehicles with Passive and Active Suspensions: A Combined Approach using Genetic Algorithms and Multibody Dynamics", Vehicle System Dynamics, vol. 37 Supplement, pp. 397-408, 2003.
,
"Dynamic Modelling of Electromechanical Multibody Systems", Multibody System Dynamics, vol. 9, pp. 87-115, 2003.
,
"Effective use of Subsystem Models in Multibody and Mechatronic System Dynamics", International Journal for Multiscale Computational Engineering, vol. 1, pp. 139-159, 2003.
,
"Inverse Dynamic Analysis of Parallel Manipulators with Full Mobility", Mechanism and Machine Theory, vol. 38, pp. 549-562, 2003.
,
"Modelling Mechatronic Multibody Systems using Symbolic Subsystem Models", Multibody System Dynamics, 2003.
,
"Multijoint Coordination of Vertical Arm Movement", Applied Bionics and Biomechanics, vol. 1, pp. 45-56, 2003.
,
"Stabilization of Constraints of Multibody System Dynamics", Mechanics of Structures and Machines, vol. 31, pp. 25-55, 2003.
,
"Stabilization of Multiple Constraints in Multibody Dynamics Using Optimization and a Pseudo-inverse Matrix", Mathematical and Computer Modelling of Dynamical Systems, vol. 9, pp. 417-436, 2003.
,
2002
"A Regularized Contact Model with Asymmetric Damping and Dwell-Time Dependent Friction", CD-ROM Proceedings of CSME Forum, Queen’s University, Canada, May, 2002.
,
"An Integrated Approach Using Genetic Algorithms, Multibody Dynamics and LQG Control for Design Optimization of Ground Vehicles with Active Suspensions", CD-ROM Proceedings of CSME Forum, Queen’s University, Canada, May, 2002.
,
"Graph-Theoretic Modelling of Multibody Systems", NATO ASI Workshop on Virtual Nonlinear Multibody Systems, Prague, Czech Republic, June, 2002.
,
"Inverse Dynamic Analysis of Parallel Manipulators with 3 or 6 Degrees of Freedom", Proceedings of 14th CISM-IFToMM Symposium on Robotics, Udine, Italy, pp. 49-58, July, 2002.
,
"On the Automatic Generation of Inverse Dynamic Solutions for Parallel Manipulators", Proceedings of Workshop on Fundamental Issues and Future Research Directions for, Quebec City, Canada, Oct., 2002.
,
"Some New Aspects of the Kinematics and Dynamics of Multibody Systems", Proceedings of International Conference on Multifield Problems, University of Stuttgart, Germany, April, 2002.
,
"A Regularized Contact Model with Asymmetric Damping and Dwell-Time Dependent Friction", Multibody System Dynamics, 2002.
,
"Dynamics of Multibody Systems using Virtual Work and Symbolic Programming", Mathematical and Computer Modelling of Dynamical Systems, vol. 8, pp. 137-156, 2002.
,
"Dynamics of Multibody Systems with Multiple Constraints", Mathematical and Computer Modelling of Dynamical Systems, 2002.
,
"Effective Use of Subsystem Models in Multibody and Mechatronic System Dynamics", International Journal of Computational Civil and Structural Engineering, 2002.
,
"On the Use of Numerical Optimization to Maximize the Critical Velocity of a Simple Rail Vehicle", Transactions of the CSME, vol. 26, pp. 311-322, 2002.
,
"Optimization of the Lateral Stability of Rail Vehicles", Vehicle System Dynamics, vol. 38, pp. 361-390, 2002.
,
"Symbolic Programming of a Graph-Theoretic Approach to Flexible Multibody Dynamics", Mechanics of Structures and Machines, vol. 30, pp. 123-154, 2002.
,
2001
"A Comparative Study of Optimization Algorithms used in Ground Vehicle Design", Proc. 6th U.S. National Congress on Computational Mechanics, Michigan, Aug., 2001.
,
"A Unified Formulation of Multibody Kinematic Equations in Terms of Absolute, Joint, and Indirect Coordinates", CD-ROM Proceedings of the ASME Design Engineering Technical Conference, Pittsburgh U.S.A., Sept., 2001.
,
"Sub-System Modelling of Mechanical Systems using Linear Graph Theory", Proc. 6th U.S. National Congress on Computational Mechanics, Michigan, Aug., 2001.
,
"A Deformation Field for Euler-Bernoulli Beams with Application to Flexible Multibody Dynamics", Multibody System Dynamics, vol. 5, pp. 79-104, 2001.
,
Kinematic and Static Analysis of a 6-bar Mechanism, Penetanguishene, Ontario, pp. 14 pages, June, 2001.
,
2000
"A Unified Modelling Approach for Electro-mechanical Multibody Systems", International Congress for Theoretical and Applied Mechanics, Chicago, 2000.
,
"Cross-Coupling Control for Slippage Minimization of a Four-Wheel-Steering Mobile Robot", Proceedings of International Symposium on Robotics, Montreal, pp. 42-47, 2000.
,
"Design and Control of an Experimental Facility for Emulating Space-Based Robotic Manipulators", Proceedings of International Symposium on Robotics, Montreal, pp. 481-486, 2000.
,
"Dynamic Modelling and Design Optimization of Automotive Suspension Systems", CD-ROM Proceedings of CSME Forum, Montreal, May, 2000.
,
"System Design, Modelling, and Control of a Four-Wheel-Steering Mobile Robot", Proceedings of the 19th Chinese Control Conference, Hong Kong, pp. 759-763, Dec., 2000.
,
"Design and Analysis of a Facility for Free-floating Flexible Manipulators", Transactions of the CSME, vol. 24, pp. 375-390, 2000.
,
"Dynamics of Flexible Multibody Systems using Virtual Work and Linear Graph Theory", Multibody System Dynamics, vol. 4, pp. 355-381, 2000.
Link to PDF (165.47 KB) ,

"Dynamics of Mountain Bicycles with Rear Suspensions: Design Optimization", Sports Engineering, vol. 3, pp. 49-56, 2000.
,
"Polynomial Shape Functions and Numerical Methods for Flexible Multibody Dynamics", Mechanics of Structures and Machines, vol. 29, pp. 43-64, 2000.
,
1999
"A Predictive Control Method for Human Motion Simulation", Proceedings of Workshop on Biomechanics Meets Robotics: Modelling and Simulation, Heidelberg, Germany, pp. 28, Nov., 1999.
,
"Graph-Theoretic Approach to Multibody Dynamics using Virtual Work as a Through Variable", Proceedings of HKK Conference, Waterloo, Ontario, pp. 43-48, 13-16 June, 1999.
,
"Inverse Dynamics of Multibody Systems using Virtual Work", Proceedings of Euromech Colloquium on Advances in Computational Multibody Dynamics, Lisbon, Portugal, pp. 801-817, 20-23 September, 1999.
,
"Inverse Dynamics of Multibody Systems using Virtual Work and Graph Theory", Proceedings of 10th World Congress on the Theory of Machines and Mechanisms, Oulu, Finland, pp. 1258-1263, 20-24 June, 1999.
,
"Modelling Human Upper Limb Biomechanics using Graph Theory", Proc. 2nd International Conference on Graphs and Mechanics, Gliwice, Poland, pp. 47-48, Oct., 1999.
,
"Prediction of Optimal Arm Motions using a Genetic Algorithm", Proc. 17th Canadian Congress of Applied Mechanics, Hamilton, Ontario, pp. 339-340, 30 May - 3 June, 1999.
,
"Symbolic Modelling and Dynamic Simulation of Flexible Manipulators using Virtual Work", Proc. 17th Canadian Congress of Applied Mechanics, Hamilton, Ontario, pp. 355-356, 30 May - 3 June, 1999.
,
"Determination of Minimum-Time Maneuvers for a Robotic Manipulator using Numerical Optimization Methods", Mechanics of Structures and Machines, vol. 2, pp. 185-201, 1999.
,
"Dynamics of Mountain Bicycles with Rear Suspensions: Modelling and Simulation", Sports Engineering, vol. 2, pp. 129-144, 1999.
,
Modelling of a Free-floating Robotic Manipulator, pp. 81 pages, June, 1999.
,
1998
"3D Analysis of Human Locomotion Using Dual-Vectors and Graph Theory", Proc. 3rd North American Conference on Biomechanics (NACOB’98), Waterloo, Ontario, Canada, pp. 213-214, 14-18 August, 1998.
,
"Application of Genetic Algorithms to the Optimization of an Active Vehicle Suspension Design", Computer Methods in Applied Mechanics and Engineering, vol. 163, pp. 87-94, 1998.
Link to PDF (459.28 KB) ,

"Automatic Generation of Motion Equations for Planar Mechanical Systems Using the New Set of "Branch Co-ordinates’’", Mechanism and Machine Theory, vol. 33, pp. 805-823, 1998.
,
1997
"A Graph-Theoretic Virtual Work Formulation for Flexible Multibody Dynamics", 16th Canadian Congress of Applied Mechanics, pp. 181-182, 1997.
,
"Design and Implementation of a Walking Robot", Proceedings of International Conference on Field and Service Robotics, Canberra, Australia, pp. 137-144, Dec., 1997.
,
"Graph-Theoretic Analysis and Numerical Optimization of Multibody Systems", Proceedings of NATO ASI on Computational Methods in Mechanisms, Varna, Bulgaria, pp. 71-80, June, 1997.
,
"On the Use of Virtual Work in a Graph-Theoretic Formulation for Multibody Dynamics", CD-ROM Proceedings, ASME Design Engineering Technical Conference, Sacramento, California, Sept., 1997.
,
"The Design and Construction of a Facility for Testing Compliant Manipulators", 16th Canadian Congress of Applied Mechanics, June, 1997.
,
"A Unified Graph-Theoretic Approach to Formulating Multibody Dynamics Equations in Absolute or Joint Coordinates", Journal of the Franklin Institute, vol. 334B, pp. 431-445, 1997.
,
"Object-Oriented Implementation of A Graph-Theoretic Formulation for Planar Multibody Dynamics", International Journal for Numerical Methods in Engineering, vol. 40, pp. 4097-4118, 1997.
,
1996
"A Symbolic Toolbox for Investigating the Structure of Multibody Dynamics", Mechanics in Design, Proceedings of C.S.M.E. Forum, pp. 75-84, 1996.
,
"Genetic Algorithm Optimization for Active Vehicle Suspension Design", Mechanics in Design, Proceedings of C.S.M.E. Forum, pp. 455-464, 1996.
,
"Modelling of Spatial Mechanical Systems using Linear Graph Theory and “Branch Coordinates”", Proc. 6th Conference on Nonlinear Vibrations, Stability, and Dynamics of Structures, Virginia Polytechnic Institute, 1996.
,
"A Model Reduction Procedure for the Dynamic Analysis of Rail Vehicles Subjected to Linear Creep Forces", Vehicle System Dynamics, vol. 25, pp. 349-367, 1996.
,
"Automated Symbolic Analysis of Mechanical System Dynamics", MapleTech, vol. 3, pp. 48-56, 1996.
,
Feller Buncher Planar Motion Boom Numerical Optimization Project, Woodstock, Ontario, pp. 56 pages, 1996.
,
"On the Use of Linear Graph Theory in Multibody System Dynamics", Nonlinear Dynamics, vol. 9, pp. 73-90, 1996.
Link to PDF (1.27 MB) ,

"Wittenburg’s Formulation of Multibody Dynamics Equations from a Graph-Theoretic Perspective", Mechanism and Machine Theory, vol. 31, pp. 201-213, 1996.
,
1995
"Automated Generation of Symbolic Equations of Motion for Multibody Systems Using Absolute Coordinates", Proc. 15th Canadian Congress of Applied Mechanics, University of Victoria, B.C., pp. 940-941, 1995.
,
"Graph-Theoretic Formulation of Multibody Dynamics Equations in a Hybrid Set of User-Defined Coordinates", Proc. 15th Canadian Congress of Applied Mechanics, University of Victoria, B.C, pp. 818-819, 1995.
,
1994
"Formulation of Multibody Dynamics Equations in Absolute or Relative Coordinates Using the Vector-Network Method", Machine Elements and Machine Dynamics, vol. ASME DE-Vol.71, pp. 361-368, 1994.
,
"Modelling and Simulation of Variable-Mass Mechanical Systems", Proceedings of 12th Symposium on Engineering Applications of Mechanics, McGill University, Montreal, Canada, pp. 559-567, 1994.
,
"Use of a Model Reduction Procedure to Speed Up Time-Domain Simulations of Rail Vehicles", Vehicle System Dynamics, vol. 23 Supplement, pp. 20-33, 1994.
,
1993
"Two Different Methods for Simulating the Motion of Variable-Mass Multibody Systems", Advanced Multibody System Dynamics: Simulation and Software Tools: Kluwer Academic, pp. 385-390, 1993.
,
"A Model Reduction Procedure for Dynamic Analyses of Rail Vehicles", Proc. 14th Canadian Congress of Applied Mechanics, Kingston, Ontario, pp. 271-272, 1993.
,
"On the Use of Linear Graph Theory in Multibody System Dynamics", Proceedings of the NATO A.S.I. on Computer-Aided Analysis of Rigid and Flexible Mechanical Systems, vol. 2, Troia, Portugal, pp. 131-150, 1993.
,
1991
"Dynamic Analysis of a Variable-Mass Multibody System", Proc. Canadian Congress of Applied Mechanics,, University of Manitoba, Winnipeg, pp. 292-293, 1991.
,
"Introduction of a Variable-Mass Element Into a Multibody Dynamic Formulation", Extended Abstracts of the First European Solid Mechanics Conference, Munich, Germany, pp. 147-148, 1991.
,
"Dynamic Analysis and Computer Simulation of Variable-Mass Multi-Rigid-Body Systems", International Journal for Numerical Methods in Engineering, vol. 32, pp. 1711-1725, 1991.
,
"Dynamics of Multibody Systems with Known Configuration Changes", Journal of Applied Mechanics, vol. 58, pp. 215-221, 1991.
,
1989
"Dynamics of Systems with Time-Varying Inertial Properties", Proc. Twelfth Canadian Congress of Applied Mechanics, Carleton University, Ottawa, Ontario, pp. 392-293, May 28 - June 2, 1989.
,
1988
"Effect of Sidespin and Wind on Projectile Trajectory, with Particular Applicaiton to Golf", American Journal of Physics, vol. 56, pp. 933-939, 1988.
,
1987
"Dispersion Envelope Graphs for Small Arms Projectiles", Proceedings of the Tenth International Symposium on Ballistics, San Diego, California, American Defense Preparedness Association, pp. 1-7, October 27-29, 1987.
,
1986
"Simulating Projectile Motion to Evaluate Stability and Dispersion", Proceedings of ASME International Computers in Engineering Conference, Chicago, pp. 319-326, 1986.
,